BEGA 50 467.1 Ceiling Luminaire LED Instruction Manual
- June 12, 2024
- BEGA
Table of Contents
BEGA 50 467.1 Ceiling Luminaire LED Instruction Manual
Instructions for use
Application
Ceiling luminaire downlight · indoor luminaire with symmetrical wide beam
light distribution. With BEGA Hybrid Optics® : Highly efficient and low-loss
light distribution, thanks to reflector and optical lens
Product description
- Ceiling luminaire downlight »GENIUS«
- Die-cast aluminium housing,
- Colour velvet white finish
- Trim ring · Chrome finish
- Clear safety glass
- Optical silicone lens ·
- BEGA Hybrid Optics®
- Reflector surface made of pure aluminium 2 mounting holes ø 4.5mm
- Distance apart 96mm Connecting terminals 2.5@
- Earth conductor connection
- LED power supply unit 220-240 V x 0/50-60 Hz DC 176-280
- V DALI-controllable Basic insulation is provided between the mains and control cables
- BEGA Thermal Switch®
- Temporary thermal shutdown to protect temperature-sensitive components Safety class I Impact strength
- IK07 Protection against mechanical impacts < 2 joule r
- Safety mark c
- Conformity mark
- Weight: 0.95 kg
- This product contains light sources of energy efficiency class(es) E
Safety
The installation and operation of this luminaire are subject to national
safety regulations. Installation and commissioning may only be carried out by
a qualified electrician. The manufacturer accepts no liability for damage
caused by improper use or installation. If subsequent modifications are made
to the luminaire, the person responsible for these modifications shall be
considered the manufacturer.
Overvoltage protection
The electronic components installed in the luminaire are protected against
overvoltage in accordance with DIN EN 61547. To achieve an additional
protection against e.g. transients, etc. we recommend separate overvoltage
protection components. You can find them on our website at
www.bega.com
Lamp
Module connected wattage : 8.1 W
Luminaire connected wattage : 9.8 W
Rated temperature :ta=25 °C
Ambient temperature : ta max=30 °C
50 467.1K3
Module designation : LED-0800/930
Colour temperature : 3000 K
Colour rendering index : CRI > 90
Module luminous flux : 1255 lm
Luminaire luminous flux :1084 lm
Luminaire luminous efficiency :110,6 lm/W
Lighting technology
Half beam angle 36°
Installation
LED are high-quality electronic components! Please avoid touching the light output opening of the LED directly during installation or relamping.
Remove mounting plate from the luminaire housing. Unplug the earth conductor connection (plug contact)
Please note:
If the luminaire is to be mounted onto a metallic, electroconductive surface,
it is mandatory to make sure that the mounting surface is connected conductive
to the earth conductor of the luminaire!
Lead the power connecting cable through the mounting plate. Fix the mounting plate with enclosed or any other suitable fixing material onto the mounting surface.
Establish the earth conductor connection on the earthing screw (1) of the mounting plate. Establish the earth conductor connection to the luminaire housing (plug contact). Push silicone sleeves over the lines and establish the electrical connection to the terminals marked (L) and (N).
The two connecting terminals marked DA, DA are provided for digital control purposes. If these terminals are not assigned, the luminaire will work with full light output.
IMPORTANT:
To ensure secure connection, the luminaire housing must be positioned
precisely in relation to the mounting plate. Make sure that the vertical bar
inside the luminaire housing is positioned precisely in the area of the
mounting hole on the long bar of the mounting plate. Press the luminaire
housing firmly against the mounting plate and turn it clockwise firmly against
the stop.
Screw enclosed trim ring with attached reflector into the luminaire housing by turning it clockwise.
Cleaning · Maintenance
Clean luminaire regularly with solvent-free cleansers from dirt.
Replacing the LED module
The designation of the LED module is noted on a label in the luminaire. The
light colour and light output of BEGA replacement modules correspond to those
of the modules originally fitted. The module can be replaced by qualified
persons using standard tools. Disconnect the electrical installation. Open the
luminaire. Please follow the installation instructions for the LED module.
Close the luminaire
Spares
Glass/Trim ring : 20 000 086M
LED power supply unit : DEV-0409/250
LED module 3000 K : LED-0800/930
Reflector unit ; 75 004 588
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>