BEGA 55 454 Wall Light Instruction Manual

: June 12, 2024
: BEGA

Table of Contents

BEGA 55 454 Wall Light
Product Information
Product Usage Instructions
Dimension
Product Description
Specifications
Installation
Maintenance
Accessory
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 55 454 Wall Light

BEGA-55-454-Wall-Light-product

Product Information

Product Name	Wandleuchte Wall luminaire Applique
Product Code	55 454
IP Rating	IP 44
Weight	2.0 kg
Lamp Type	E27 Screw Base
Lamp Output	Max. 75 W
Luminaire Efficiency	86%

Product Usage Instructions

Install the lamp.
Insert the glass into the base and center it.
Ensure proper placement of the glass seal.
Open the luminaire and clean it using the appropriate cleaning products.
Close the luminaire.
Do not use high-pressure cleaners for cleaning.

Note: The installation and commissioning of this luminaire should be done by a qualified electrician. The manufacturer is not liable for damage caused by improper use or installation. If any modifications are made to the luminaire, the person responsible for these modifications is considered the manufacturer.

Dimension

BEGA-55-454-Wall-Light-fig-1

Application

Wall luminaire for many lighting tasks on or in buildings.
Ideal for places where a soft and uniform light distribution is required.

Product Description

Luminaire made of aluminium alloy and stainless steel
BEGA Unidure® coating technology
Opal glass: 2 mounting holes ø 5.2 mm
Distance apart 70 mm
1 cable entry for mains supply cable up to ø 10,5 mm
Connecting terminal 2.5@ with plug connection
Earth conductor connection
Lampholder E 27
Safety class: I
Protection class: IP 44
Protected against granular foreign bodies ≥ 1 mm and splash water
Impact strength: IK02
Protection against mechanical impacts < 0.2 joule
: Safety mark
CE: Conformity mark
Weight: 2.0 kg

Safety

The installation and operation of this luminaire are subject to national safety regulations.
Installation and commissioning may only be carried out by a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or installation.
If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Specifications

Lamp

Luminaire with screw base: E 27
Lamp output max: 75 W
This product contains light source of energy efficiency class E

Supplied lamp

BEGA LED lamp: 13 588
LED Retrofit: 8 W · 1055 lm · 3000 K
Luminaire efficiency: 86%

Additional BEGA LED lamps are available for this luminaire:

13 584: LED 7 W · 805 lm · 3000 K
13 586: LED 7 W · 805 lm · 3000 K dimmable
13 590: LED 12 W · 1400 lm · 3000 K
13 592: LED 12 W · 1400 lm · 3000 K dimmable

Detailed technical and lighting data for the lamps can be found in the data sheets on our website.

Installation

Undo screw at wall bracket.
Remove mounting plate from wall bracket.
Lead mains supply cable through the cable entry of the mounting plate.
Note position of application of the mounting plate »arrow down«.
Fix mounting plate with enclosed or any other suitable fixing material onto the mounting surface.
It is absolutely essential to use the enclosed gaskets.
Make earth conductor connection and electrical connection.
Make earth conductor connection between mounting plate and luminaire housing.
Push plug into coupler up to the stop.
Note the position of application of the luminaire »arrow down«.
Place luminaire onto mounting plate, adjust and fix with screw.
Insert lamp.
Insert sphere into glass holder plate and push it centrally.
Make sure that the glass gasket is positioned correctly.
Tighten fixing screws of glass holder plate evenly.