BEGA 50 183.2 Ceiling Luminaire Instructions
- June 12, 2024
- BEGA
Table of Contents
BEGA 50 183.2 Ceiling Luminaire
Product Information
| Component | Value |
|---|---|
| Lamp Module connected wattage | 8.9 W |
| Luminaire connected wattage | 10.6 W |
| Rated temperature | 25-40 °C |
| Ambient temperature | 25-40 °C |
| Module designation | LED-0623/930 |
| Colour temperature | 3000 K |
| Colour rendering index (CRI) | >90 |
| Module luminous flux | 1135 lm |
| Luminaire luminous flux * | 446 lm |
| Luminaire luminous efficiency * | 42.1 lm/W |
DIMENSION
Preliminary data
For more detailed luminaire data, including data for outdoor lighting, street
lighting, and indoor lighting, as well as luminaire data in EULUMDAT and IES
format, please visit the BEGA website at www.bega.com.
Product Usage Instructions
- The installation and operation of this luminaire should be carried out in accordance with national safety regulations.
- Installation and commissioning should only be performed by a qualified electrician.
- Improper use or installation may result in damage for which the manufacturer accepts no liability.
- If any modifications are made to the luminaire, the person responsible for these modifications will be considered the manufacturer.
Spares
The following spares are available:
- Shield
- LED power supply unit
- LED module 3000 K
Product Code: 42 000 029 .1L DEV-0136/500 LED-0623/930
Instructions for use
Application
- Ceiling luminaire · indoor luminaire with aluminium housing for non-glare light deflected downwards.
- The used LED technique offers durability and optimal light output with low power consumption at the same time.
Product Description
- Ceiling luminaire »STUDIO LINE«
- Aluminium housing shield,
- Finish Colour velvet black inside hue aluminium matt
- Light-diffusing silicone lens
- Mounting plate with 2 fixing holes ø 4.5 mm · 80 mm spacing
- Connecting terminals 2.5@
- Earth conductor connection
- LED power supply unit 220-240 V x 0/50-60 Hz
- DC 176-280 V
- Safety class I
- r – Safety mark
- c – Conformity mark
- Weight: 0.45 kg
This product contains light sources of energy efficiency class(es) E
Safety
- The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician.
- The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.
Lamp
- Module connected wattage 8.9 W
- Luminaire connected wattage 10.6 W
- Rated temperature ta=25 °C
- Ambient temperature ta max=40 °C
50 183.2K3
- Module designation LED-0623/930
- Colour temperature 3000 K
- Colour rendering index CRI > 90
- Module luminous flux 1135 lm
- Luminaire luminous flux * 446 lm
- Luminaire luminous efficienc y * 42,1 lm/Wpreliminary data
Lighting technology
Luminaire data for the DIALux lighting design program for outdoor lighting,
street lighting and indoor lighting, as well as luminaire data in EULUMDAT and
IES format are available on the BEGA website at
www.bega.com.
Cleaning Maintenance
Clean luminaire regularly with solvent-free cleansers from dirt.
Replacement of the LED module
- The designation of the LED module is noted on a label in the luminaire.
- The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted. The module can be replaced by qualified persons using standard tools.
- Disconnect the system.
- Pull housing shield off the mounting plate. Open the luminaire.
- Please follow the installation instructions for the LED module. Close the luminaire.
- Pass the housing shield with its inner groove to the front over the LED cover until the housing shield latches in place audibly.
Spares
- Shield 42 000 029 .1L
- LED power supply uni t DEV-0136/500
- LED module 3000 K LED-0623/930
ADDRESS: BEGA Gantenbrink-Leuchten KG · Postfach 3160 · 58689 Menden ·
info@bega.com
www.bega.com