BEGA 78 469.1 Wall Luminaire for Indoor Use Instruction Manual
- June 12, 2024
- BEGA
Table of Contents
BEGA 78 469.1 Wall Luminaire for Indoor Use
Product Information
The product is a luminaire with the following technical and lighting data:
- Luminaire efficiency: 49%
Detailed technical and lighting data for the lamps can be found in the data sheets on our website.
Dimension
Instructions for use
Application
Wall luminaire · indoor luminaire made of handblown opal glass, satin matt and
metal housing, for all lighting tasks in interior applications. They are ideal
for places where a soft and uniform lighting distribution is required.
Luminaire with a high protection class.
- Lamp
- Luminaire with screw base E 14
- Lamp output max. 2 × 40 W
- This product contains light sources of energy
- efficiency class E
- Supplied lamp
- 2 × BEGA LED lamp 13552
- LED Retrofit 4 W · 470 lm · 2700 K
- Supplied lamp
- 2 × BEGA LED lamp 13594
- LED Retrofit 4 W · 470 lm · 3000 K
- Luminaire efficiency: 49%
Product description
Die-cast aluminium and aluminium housing, finish Colour white Hand-blown opal
glass, satin matt 2 mounting holes ø 5.5 mm Distance apart 330 x 56 mm 1 cable
entry for mains supply cable up to ø 10.5 mm max. 3 x 1.5@ Connection terminal
2.5@ Earth conductor connection Lampholder E 14 Safety class I Protection
class IP 44 Protected against granular foreign bodies ≥ 1 mm and splash water
Impact strength IK03 Protection against mechanical impacts < 0.35 joule r –
Safety mark c – Conformity mark Weight: 1.5 kg
Safety
The installation and operation of this luminaire are subject to national
safety regulations.Installation and commissioning may only be carried out by a
qualified electrician. The manufacturer accepts no liability for damage caused
by improper use or installation. If subsequent modifications are made to the
luminaire, the person responsible for these modifications shall be considered
the manufacturer.
Installation
Loosen screw of the lateral cover and take off the glass from the luminaire
housing. Lead the mains supply cable into the luminaire housing.Fix the
luminaire housing with enclosed or any other suitable fixing material onto the
mounting surface. It is imperative to use the enclosed gaskets. Make earth
conductor connection. Push silicone sleeves over the lines and make electrical
connection to the terminals. Insert lamp. Position glass into the luminaire
housing and fix it with the screw and the cover.
Relamping · Maintenance
Disconnect the electrical installation. Take off glass from luminaire housing. Clean luminaire and glass. Use only solvent-free cleansers. Change the lamp. Fix the glass.
- Spares
- Spare glass 11 002 798 .0R G
- LED lamp 2700 K 13 552
- LED lamp 3000 K 13 594
- Lampholder 63 000 051
BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info@bega.com · www.bega.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>