GADGETMONSTER GDM-1004 USB Fridge User Manual
- June 12, 2024
- GADGETMONSTER
Table of Contents
GADGETMONSTER GDM-1004 USB Fridge
USB FRIDGE – GDM-1004
The USB Fridge GDM-1004 is a compact and portable refrigerator that can be powered through a USB connection. It is designed to keep your beverages cold and refreshing while you work or relax at your desk.
Product Information
- Model: GDM-1004
- Brand: DAN
- Country of Origin: England
- Distributor: DistIT Services AB
- Address: Suite 89, 95 Mortimer Street, London, W1W 7GB, England
Product Usage Instructions
- Place the USB Fridge on a stable and flat surface near your computer or any other device with a USB port.
- Connect the USB cable of the fridge to an available USB port on your computer or power source.
- Open the fridge door by gently pulling the handle.
- Insert your desired beverages or small snacks into the fridge, making sure not to overfill it.
- Close the fridge door securely.
- Wait for the fridge to cool down. This may take a few minutes.
- Once the fridge has reached the desired temperature, you can enjoy your cold beverages or snacks.
Note: The USB Fridge is not designed to cool large quantities of items or perishable food. It is recommended to use it for keeping beverages cool during short periods of time.
If you have any questions or encounter any issues with the USB Fridge GDM-1004, please refer to the user manual or contact our customer support at the provided address.
OVERVIEW
- I = heating function
- II = cooling function
- O = power off
Features
- Cools down to 10-15°C @ 25°C ambient temperature, or to 0-8°C @ 15°C ambient temperature with cooling function.
- Can keep the beverage at about 40-50°C with heating function on.
- The USB port is Plug and Play; no drivers are needed.
Use
- Powered by USB 5V/1A.
- Connect to a USB port on a computer, laptop or a USB charger for example. If it is connected to a computer or laptop it will not reach the required 1 Ampere, and the effect of the product will be lower. We recommend using a power adapter (Not included) with matching power of 5V/1A.
- Use the switch to change between II = cooling function, I = heating function, and O = power off.
- While cooling the LED will be lit green. While heating the LED will be lit red.
- Place the drink and use either cooling or heating.
- Clean with a dry cloth.
Safety instructions
- Handle with care. Do not expose to physical chock damages.
- If there are unusual noises or smells coming from the product, stop use immediately.
- Do not open up or try to repair the product by yourself. Instead, contact an authorized electrician or the retailer.
DistIT Services AB, Glasfi bergatan 8, 125 45 Älvsjö, SwedenDistIT Services AB, Suite 89, 95 Mortimer Street, London, W1W 7GB, England.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>