GADGETMONSTER GDM-1005 Wireless Charger 3-in-1 User Manual
- June 12, 2024
- GADGETMONSTER
Table of Contents
GADGETMONSTER GDM-1005 Wireless Charger 3-in-1
PRODUCT OVERVIEW
-
Charge pad for phone (5 W/7.5 W/10 W)
-
Charge pad for watch (3 W) Optimized for Apple Watch.
Does not work for all smart watches. -
Charge pad for wireless earbuds (5 W)
Safety instructions
-
Keep the wireless charger away and protected from water and other liquids.
-
To clean the charger use a dry cloth and make sure it is not connected to a power supply.
-
Environment temperature should be: -20°C to +45°C.
The following situations can cause failures like: high temperature/no or slow charging: -
The connected adapter or USB port does not have enough power output.
-
The charging cable it is not compatible with the power adapter’s output.
-
The phone case is too thick, recommended max phone case thickness is 2-3 mm.
-
There is metal or a magnet on the back of the phone or phone case.
-
The phone/device is not placed at the center of the wireless charger.
-
The phone/device does not support Qi wireless charging.
-
Do not place bank cards on the charger.
How to use
- Insert the USB-C connector of the charging cable into a USB power adapter.
- Put your devices on the wireless charger to charge.
LED
Static light: Charging.
Flashing light : Foreign object detected. Charging disabled.
Charging
To charge phones with 7.5 W / 10 W or to charge watches/wireless earbuds, you
need a “Quick Charge” or “Power Delivery” USB power adapter with 5 V /
2 A or 9 V / 2 A. Additionally, if you want to charge more then 1 device at
the same time, the USB power adapter must also support 9 V, 2 A.
Compatibility with wireless charging and a USB power adapter is required.
Watches will charge with 3 W.
Wireless earbuds will charge with 5W.
Please note that the charge pad for watches is optimized for Apple Watch and
it is not compatible with all smart watches.
Disposal of electric and electronic devices EC Directive 2012/19/EU This product is not to be treated as regular household waste but must be returned to a collection point for recycling electric and electronic devices. Further information is available from your municipality, your municipality’s waste disposal services, or the retailer where you purchased your product.
SIMPLIFIED EU DECLARATION OF CONFORMITY
The simplified EU declaration of conformity referred to in Article 10(9) shall be provided as follows: Hereby, DistIT Services AB declares that the radio equipment type wireless device is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.aurdel.com/compliance/
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>