GADGETMONSTER GDM-1003 Smart Mug Keeps The Drink Instructions

GADGETMONSTER GDM-1003 Smart Mug Keeps The Drink

PRRODUCT INFORMATON

The Smart Mug GDM-1003 keeps your drink warm for up to 8 hours. It is equipped with an induction heating method and can hold approximately 350 ml of liquid.

Product Usage Instructions

1. Place the charging base on a flat surface.
2. Connect the charging cable to the base and plug it into a power source.
3. Ensure that ordinary mugs are not compatible with the charging base.
4. After 8 hours of using the keep-warm function, the mug will automatically switch to standby mode.
5. Place the matching ceramics mug in the center of the base and ensure that the LED light flashes to indicate charging state.
6. The LED light will stop flashing once the mug is fully charged.
7. The indicator light will turn off automatically when the mug is removed from the charging base.
8. The mug uses 18 W of power and has a wireless induction heating method.
9. After power-on, place the matching ceramics mug in the center of the base.
10. After 8 hours of using the keep-warm function, the mug will automatically switch to standby mode.
11. Place the matching ceramics mug in the center of the base and ensure that the LED light flashes to indicate charging state.
12. The LED light will stop flashing once the mug is fully charged.
13. The indicator light will turn off automatically when the mug is removed from the charging base.
14. Do not use metal or aluminum mugs with this product as they are not compatible.

Safety instructions

1. Do not disassemble or modify this product yourself.
2. Keep the charger away from water and other liquids.
3. Before cleaning the charger, unplug it from power first.
4. Suitable for ambient temperatures at 0-45°C.
5. Do not place foreign objects such as metals, coins and keys or magnetic materials such as bank cards on the charger.
6. The mug must only be hand washed, not for dishwasher.
7.  The mug must not be placed in the microwave or the oven.
8. Warning! The charge base gets hot with or without liquid.

Use

• The bottom of the mug is made of special materials. The mug is heated by electromagnetic induction. Ordinary mugs are not compatible and cannot be heated.

• For use with mug: place the mug in the center of the charger. The LED confirms by flashing.

• The charger automatically enters standby mode after 8 hours of using the keep warm function.

• For charging: place the phone in the center of the charger. The LED confirms by flashing.

Specification

• Heat effect: 18W
• Heating method: wireless induction heating
• Mug size: about 350 ml
• Keep warm: about 55°C

LED status

• The LED flashes three times = the charger is powered on and heating the mug.
• The LED is turned off = standby mode or not powered on.
• The LED is flashing slowly = heating or charging.
• The LED is flashing fast = Something is wrong. Bad placement or foreign object detected.

Care and cleaning

1. Wipe the charger and cable with a dry cloth. Keep away from water and other liquids.
2. Clean the mug manually, the mug is not dishwasher safe.
3. The mug can be dried and disinfected in up to 150°C, but it can-not be placed in the microwave oven or in the oven.

Troubleshooting

• Problem: No power.
  Possible solutions

  • The power outlet is not working. Try another power outlet.
  • The charger, the power adapter (not included) or the cable is not connected or broken. Reconnect them or replace the broken ones. Something is wrong with the charging circuit, contact the retailer.

• Problem: LED is flashing fast.
  Possible solutions
  Bad placement. Try other placing in the center of the charger. The mug has been heated for over 8 hours. Remove the mug.

DISPOSAL

Disposal of electric and electronic devices EC Directive 2012/19/ EU This product is not to be treated as regular household waste but must be returned to a collection point for recycling electric and electronic devices. Further information is available from your munic-ipality, your municipality’s waste disposal services, or the retailer where you purchased your product.

SIMPLIFIED EU DECLARATION OF CONFORMITY

The simplified EU declaration of conformity referred to in Article 10(9) shall be provided as follows: Hereby, DistIT Services AB de-clares that the radio equipment type wireless device is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.aurdel.com/compliance/

References

• aurdel.com/compliance/

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>