GADGETMONSTER GDM-1010 Giant Speaker User Manual

GADGETMONSTER GDM-1010 Giant Speaker

The Giant Speaker GDM-1010 DAN is a portable speaker that is powered by a built-in rechargeable battery. The speaker comes with a USB port, USB charge port, and MicroSD card slot. It also features volume control and the ability to skip to the next song. The speaker has Bluetooth connectivity and can be paired with any Bluetooth-enabled device.

Product Usage Instructions

To use the Giant Speaker GDM-1010 DAN, follow these instructions:

1. To turn the speaker on or off, press and hold the power button (1).
2. The USB port (2) can be used to connect the speaker to a computer or other device for charging or data transfer.
3. Use the USB charge port (3) to charge the built-in battery. Connect the charging cable to the charge port and to a USB port on your computer or a USB charger.
4. The MicroSD card slot (4) allows you to play music directly from a MicroSD card.
5. Use the volume control button (5) to increase the volume or skip to the next song.
6. The play/pause button (6) can be used to play or pause music, answer or end phone calls, or switch between modes.
7. Use the volume control button (7) to decrease the volume or skip to the previous song. To disconnect Bluetooth, press and hold this button.
8. The LED light (8) can be turned on or off by pressing the button.
9. The LED light (9) indicates the status of the speaker.

For safety purposes, follow these instructions:

• Use only charging devices that are marked with a 5V power
  rating to avoid damaging the speaker.

• Do not open the speaker as it may damage the product.

• Do not attempt to repair the product yourself.

• Avoid exposing the speaker to high temperatures as it may damage the product.

• Keep the speaker away from other electronic devices that may interfere with the Bluetooth connection.

To connect the speaker to a Bluetooth-enabled device:

1. Turn on the speaker by pressing and holding the power button (1).
2. On your device, search for Bluetooth devices and select the Giant Speaker GDM-1010 DAN from the list.
3. The speaker will emit a sound to indicate a successful connection.

To disconnect the speaker:

• On your device, disconnect the Bluetooth connection with the speaker.
• If you want to connect another device to the speaker, then first disconnect the current one.

overview

1. Power on/off
2. USB port
3. USB charge port
4. MicroSD card slot
5. Increase volume/next song
6. /wirelessly connect for “TWS” 6. Play/pause/hang up /call/change mode
7. Decrease volume/previous song /disconnect Bluetooth
8. Torch light on/off
9. The LED torch’s light

Safety instructions

1. Only use charging devices marked with 5 V to avoid damage to the speaker.
2. Do not open up the speaker. It may damage the product.
3. Do not try to repair the product yourself.
4. Never place the speaker close to high temperature sources.

The speaker’s battery

• A built-in rechargeable battery powers the speaker.

Charging the battery

• Connect a charging cable to the charge input and to a USB port on your computer or a USB charger.

Bluetooth

• The Bluetooth range is up to 10 meters.
• Obstacles between this product and the Bluetooth device can reduce the range.
• Keep the device away from any other electronic devices that may cause interference.

Use

• Press and hold the power button to power the speaker on or off.
• You can now connect to a Bluetooth device.
• Use button (6) to Play/pause/hang up/call/change mode.

Connect the speaker

• Power the speaker on. On your device search for Bluetooth devices.
• Select the speaker from the list.
• The speaker will give an indication sound when the connection is successful.
• Only one Bluetooth device can be connected at the same time.
• If you want to connect another device to the speaker, then first disconnect the current one.

Disconnect the speaker

• On your device, disconnect the Bluetooth connection with the speaker.

Reconnect the speaker

• Some Bluetooth devices support automatic reconnection, with those devices the speaker will automatically reconnect.
• The speaker will not automatically reconnect on devices that does not support automatic reconnection.

Change volume and song

• Use the buttons to (5. and 7.) increase and decrease volume.
• Use the buttons (5. and 7.) to change to previous or next song.

MicroSD

• Insert a MicroSD card and power on the speaker to play music.

Torch light

• Short press on the torch light button (8) to turn the torch light on or off.

“TWS”

“TWS” means true wireless stereo. This product can be connected wirelessly to another speaker of the same model for playing stereo audio.

1. Disconnect the speakers from Bluetooth connections.
2. Turn Bluetooth on for both speakers.
3. Press + button 2 times to connect or disconnect the speakers. A sound will be played.
4. Connect to the speakers via your phone.

Disposal of electric and electronic devices EC Directive 2012/19/EU This product is not to be treated as regular household waste but must be returned to a collection point for recycling electric and electronic devices. Further information is available from your municipality, your municipality’s waste disposal services, or the retailer where you purchased your product.SIMPLIFIED EU DECLARATION OF CONFORMITY
The simplified EU declaration of conformity referred to in Article 10(9) shall be provided as follows: Hereby, DistIT Services AB declares that the radio equipment type wireless device is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.aurdel.com/compliance/.

• DistIT Services AB
• Glasfibergatan 8,
• 125 45 Älvsjö, Sweden

References

• aurdel.com/compliance/

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>