HYTRONIK DALI-2 DT6 Dimmable LED Driver Bluetooth Sensor Instruction Manual

DALI-2 DT6 Dimmable LED Driver Bluetooth Sensor

DALI-2 DT6 LED Driver + Sensor Head with 5.0 SIG Mesh

HEC7030/BF

Constant Current

Product Description

HEC7030/BF is DALI-2 DT6 dimmable LED driver + Bluetooth sensor
head in detached design with maximum power output of 30W. Such
detached design is exible with optional motion detection for lighting
manufacturers; with Bluetooth sensor head unattached, HEC7030/BF
is solely a DALI-2 DT6 LED driver; with Bluetooth sensor head attached,
it becomes a LED driver + sensor combo. With Bluetooth wireless mesh
networking, it makes communication between luminaires much easier
without time-consuming hardwiring, which eventually saves costs for
projects. Meanwhile, simple device setup and commissioning can be
done via app.

App Features

Quick setup mode & advanced setup mode
Floorplan feature to simplify project planning
Web app/platform for dedicated project management
Koolmesh Pro iPad version for on-site configuration
Grouping luminaires via mesh network
Scenes
Detailed motion sensor settings
Push switch configuration
Schedule to run scenes based on time and date
Astro timer (sunrise and sunset)
Staircase function (master & slave)
Internet-of-Things (IoT) featured
Device firmware update over-the-air (OTA)
Device social relations check
Bulk commissioning (copy and paste settings)
Power-on status (memory against power loss)
Offline commissioning
Different permission levels via authority management
Network sharing via QR code or keycode
Remote control via gateway support HBGW01
Interoperability with Hytronik Bluetooth product portfolio
Compatible with EnOcean switch EWSSB/EWSDB
Continuous development in progress…

Hardware Features

DALI-2 with DALI feedback
Switch-Dim (Push switch)
PWM 1KHz (1-100%)
Stand-by power<0.5W
Active PFC design
Logarithmic Dimming
Linear Dimming
Congurable constant current (CC) output via DIP switches
Permanent setting memory, protected against loss of power
Short-circuit Protection
Open-circuit Protection
Overload Protection
5-year warranty, designed for long lifetime up to 50,000 hours

Output Configuration

Warning: Please make sure the correct current is selected before starting the driver!

Technical Specifications

Input

Mains Voltage 220~240VAC 50/60Hz
Mains Current 0.17~0.16A
Power Factor 0.9
Max. Efficiency 86%

Output

Output Current 350mA~900mA
Output Voltage 10-57V
Uout Max. 75V
Turn-on Time <0.5s
Dimming Interface Switch-Dim/DALI

Max. output power/current/voltage range
HEC7030/BF 3.5-20W/350mA /10-57V
5-29W/ 500mA /10-57V
5.5-30W/ 550mA /10-55V
7-30W/ 700mA /10-43V
7.5-30W/ 750mA /10-40V
9-23W/900mA /10-25V

Environment
EMC Standard EN55015, EN61547, EN61000-3-2/-3-3, EN62479
Safety Standard EN61347-1, EN61347-2-13

Dielectric strength Input→output: 3000VAC / 5mA /1min

Abnormal protection Output short-circuit protection Overload Protection Open- circuit Protection

Mechanical Structure & Dimensions

Wire Preparation

To make or release the wire from the terminal, use a
screwdriver to push down the button.

Wiring Diagram

Wiring Diagram For DALI

Wiring Diagram For Switch-Dim

Loading and In-rush Current

Circuit Breaker Information

The data above is calculated according to the formula: Maximum Amount = 16/(Pn/230). In order to provide a more reliable
reference in real application, the data have been revised to take 60% of the number calculated, i.e. 16/(Pn/230) x 60%.
Please kindly take note that the calculation is based on ABB circuit breaker series S200. Actual values may differ due to different
types of circuit breaker used and installation environment.

Performance Characteristics

Dimming Characteristics

Technical Specifications for Sensor Heads

Bluetooth Transceiver
Operation frequency 2.4 GHz – 2.483 GHz
Transmission power 4 dBm
Range (Typical indoor) 10~30m
Protocol 5.0 SIG Mesh

HF Sensor Properties (HBT01)
Sensor principle High Frequency (microwave)
Operation frequency 5.8GHz +/- 75MHz
Transmission power <0.2mW
Detection range* Max installation height：3m Max detection range：8m (diameter)
Detection angle 30O ~ 150O

Environment
Operation temperature -20°C ~ 55°C
Storage temperature Ta: -20°C ~ +70°C
Relative humidity 0 ~ 90%
IP rating IP20

PIR Sensor Properties (HIR13 & HIR16 & HIR62 & HIR62/R)
Sensor principle PIR detection
Operation voltage 5VDC
Detection range HIR13
HIR16
HIR62
Max installation height：15m (forklift)
12m (single person)
Max detection range： 18m 6m (L * W)
Max installation height：3m (forklift)
Max detection range： 12m (diameter)
Max installation height：12m (forklift)
8m (single person)
Max detection range： 20m (forklift)
12m (single person)
Max installation height：15m (forklift)
12m (single person)
Max detection range： 24m (diameter)
Detection angle 360°

• The detection range is heavily influenced by sensor placement (angle) and different walking paces. It may be reduced under certain
  conditions.

PIR & microwave sensor heads

The range of PIR and microwave sensor heads below with Bluetooth modules built in offers powerful number of Plug’n’Play
feature options to expand the flexibility of luminaires design. This approach to luminaire design reduces space requirements
and component costs whilst simplifying production.

A. HBT01
Surface mounting
Photocell AdvanceTM
The cable length is around 30cm.

B. HBT02
Surface mounting
Without motion sensor
Photocell AdvanceTM
The cable length is around 30cm.

C. HIR13/S
Surface mounting
For highbay application
IP65 (facia / lens part)
The cable length is around 30cm.

D. HIR13/F
Flush mounting
For highbay application
IP65 (facia / lens part)
The cable length is around 30cm.

E.HIR13/C
Screw to the luminaire by conduit
For highbay application
IP65 (facia / lens part)
The cable length is around 30cm.

F.HIR16
PIR sensor head
For highbay application
IP65 (facia / lens part)
The cable length is around 30cm.

Installation for HIR16

G. HIR62
PIR sensor head
The cable length is around 30cm.

H. HIR62 with HA04
PIR sensor head
The cable length is around 30cm.

I. HIR62 with HA05
PIR sensor head
The cable length is around 30cm.

J. HIR62/RPIR sensor head
IP65 (facia / lens part)
The cable length is around 30cm.

Detection Pattern

HBT01

The detection range is heavily influenced by sensor placement (angle) and
different walking paces.
It may be reduced to 2m(diameter) & 3m(height) under certain conditions
(walking across).

HIR16

*The detection patterns are based upon 5km/h movement speed.

HIR62 HIR62/R

*The detection patterns are based upon 5km/h movement speed.

Dimming Interface Operation Notes

Switch-Dim

This series of products are supplied as ‘plug n’play DALI’ or ‘independent DALI’ system ready.
These models are also fully DALI addressable and may be assigned to groups within the limits specied by the DALI protocol or supporting DALI
controllers by using a DALI programming tool.

DALI

The provided Switch-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switches.
Up to 64 LED drivers maybe connected to one switch.

Switch Action Response
Short press (<0.4 second) Toggle light on / off
Note: short press has to be longer
than 0.1s, or it will be invalid.
Long press (>0.4 second) Toggle dim light / increase brightness
Synchronization
Switch Action Response
Long press (>15 seconds) All lights will dim down to minimum then return to 50% brightness

• We recommend the number of drivers connected to a switch does not exceed 25 pieces. The maximum length of the wires from push to
  driver should be no more than 20 meters.

Additional Information / Documents

1. For full explanation of Hytronik Photocell AdvanceTM technology, please kindly refer to
   www.hytronik.com/download ->knowledge ->Introduction of Photocell Advance

2. To learn more about detailed product features/functions, please refer to
   www.hytronik.com/download ->knowledge ->Introduction of App Scenes and Product Functions

3. Regarding precautions for Bluetooth product installation and operation, please kindly refer to
   www.hytronik.com/download ->knowledge ->Bluetooth Products – Precautions for Product Installation and Operation

4. Regarding precautions for microwave sensor installation and operation, please kindly refer to
   www.hytronik.com/download ->knowledge ->Microwave Sensors – Precautions for Product Installation and Operation

5. Regarding precautions for PIR Sensors installation and operation, please kindly refer to
   www.hytronik.com/download ->knowledge ->PIR Sensors – Precautions for Product Installation and Operation

6. Regarding precautions for LED driver installation and operation, please kindly refer to
   www.hytronik.com/download ->knowledge ->LED Drivers – Precautions for Product Installation and Operation

7. Data sheet is subject to change without notice. Please always refer to the most recent release on
   www.hytronik.com/products/bluetooth technology ->Bluetooth Drivers

8. Regarding Hytronik standard guarantee policy, please refer to
   www.hytronik.com/download ->knowledge ->Hytronik Standard Guarantee Policy

References

• iot.koolmesh.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>