HYTRONIK HEC7030-BF LED Driver Sensor Head Instruction Manual

June 12, 2024
HYTRONIK

HYTRONIK logo HYTRONIK HEC7030 BF LED Driver Sensor Head -
SymbolDALI-2 DT6 LED Driver + Sensor
Head with 5.0 SIG Mesh

HEC7030/BF
Constant Current
Instruction ManualHYTRONIK HEC7030 BF LED Driver Sensor
Head

Product Description

HEC7030/BF is DALI-2 DT6 dimmable LED driver + Bluetooth sensor head in detached design with maximum power output of 30W. Such detached design is flexible with optional motion detection for lighting manufacturers; with Bluetooth sensor head unattached, HEC7030/BF is solely a DALI-2 DT6 LED driver; with Bluetooth sensor head attached, it becomes a LED driver + sensor combo. With Bluetooth wireless mesh networking, it makes communication between luminaires much easier without time-consuming hardwiring, which eventually saves costs for projects. Meanwhile, simple device setup and commissioning can be done via app.

App Features

| Quick setup mode & advanced setup mode
---|---
| Floorplan feature to simplify project planning
| Web app/platform for dedicated project management
| Koolmesh Pro iPad version for on-site configuration
| Grouping luminaires via mesh network
| Scenes
| Detailed motion sensor settings
| Push switch configuration
| Schedule to run scenes based on time and date
| Astro timer (sunrise and sunset)
| Staircase function (master & slave)
| Internet-of-Things (IoT) featured
| Device firmware update over-the-air (OTA)
| Device social relations check
| Bulk commissioning (copy and paste settings)
| Power-on status (memory against power loss)
| Offline commissioning
| Different permission levels via authority management
| Network sharing via QR code or keycode
| Remote control via gateway support HBGW01
| Interoperability with Hytronik Bluetooth product portfolio
| Compatible with EnOcean switch HBES01/W & HBES01/B
| Continuous development in progress…

Hardware Features

| DALI-2 with DALI feedback
---|---
| Switch-Dim (Push switch)
| PWM 1KHz (1-100%)
| Stand-by power<0.5W
| Active PFC design
| Logarithmic Dimming
| Linear Dimming
| Configurable constant current (CC) output via DIP switches
| Permanent setting memory, protected against loss of power
| Short-circuit Protection
| Open-circuit Protection
| Overload Protection
| 5-year warranty, designed for long lifetime up to 50,000 hours

HYTRONIK HMW84 HF Motion Sensor - switchFully support EnOcean self-powered switch module PTM215B (HBES01/W & HBES01/B)

Output Configuration

Warning: Please make sure the correct current is selected before starting the driver!

5.0 SIG mesh

|
---|---
https://apps.apple.com/cn/app/koolmesh/id1483721878| https://play.google.com/store/apps/details?id=com.koolmesh.sig

Smortphone app for both iOS & Android platform
https://apps.apple.com/cn/app/koolmesh/id1570378349
Koolmesh Pro app for iPad
http://www.iot.koolmesh.com
Web app/platform: www.iot.koolmesh.com

Technical Specifications

Input

Mains Voltage 220~240VAC  50/60Hz
Mains Current 0.17~0.16A
Power Factor 0.9
Max. Efficiency 86%

Output

Output Current 350mA~900mA
Output Voltage 10-57V
Uout Max. 75V
Turn-on Time <0.5s
Dimming Interface Switch-Dim/DALI

Max. output power/current/voltage range

HEC7030/BF| 3.5-20W/350mA /10-57V
5-29W/ 500mA /10-57V
5.5-30W/ 550mA /10-55V
7-30W/ 700mA /10-43V
7.5-30W/ 750mA /10-40V
9-23W/900mA /10-25V
---|---

Environment

Operation Temp. -20 ~ +50 ℃
Case Temp. (Max.) 80 ℃
IP Rating IP20

Safety and EMC

EMC Standard| EN55015, EN61547,
EN61000-3-2/-3-3,
EN62479
---|---
Safety Standard| EN61347-1, EN61347-2-13
Dielectric strength| Input→output: 3000VAC / 5mA /1min
Abnormal protection| Output short-circuit protection
Overload Protection
Open-circuit Protection

Mechanical Structure & Dimensions

HYTRONIK HEC7030 BF LED Driver Sensor Head -
Dimensions Wire Preparation To make or release the wire from the terminal, use a screwdriver to push down the button.

Wiring Diagram

Wiring Diagram For DALIHYTRONIK HEC7030 BF LED Driver Sensor Head -
Wiring Diagram Wiring Diagram For Switch-DimHYTRONIK HEC7030 BF LED Driver Sensor Head - Wiring Diagram For
Switch-DimLoading and In- rush Current

Model HEC7030/BF
In-rush Current (Imax.) 38A
Pulse Time 35 us

Circuit Breaker Information

Automatic circuit breaker type B16A B10A B13A B20A B25A
HEC7030/BF 54 34 43 67 84

The data above is calculated according to the formula: Maximum Amount = 16/(Pn/230). In order to provide a more reliable reference in real application, the data have been revised to take 60% of the number calculated, i.e. 16/(Pn/230) x 60%. Please kindly take note that the calculation is based on ABB circuit breaker series S200. Actual values may differ due to different types of circuit breaker used and installation environment.

Performance CharacteristicsHYTRONIK HEC7030 BF LED Driver Sensor Head -
Performance Characteristics Dimming CharacteristicsHYTRONIK HEC7030 BF LED Driver Sensor Head -
Dimming Characteristics

Technical Specifications for Sensor Heads

Bluetooth Transceiver

Operation frequency 2.4 GHz – 2.483 GHz
Transmission power 4 dBm
Range (Typical indoor) 10~30m
Protocol 5.0 SIG Mesh

HF Sensor Properties (HBT01)

Sensor principle High Frequency (microwave)
Operation frequency 5.8GHz +/- 75MHz
Transmission power <0.2mW
Detection range* Max installation height: 3m

Max detection range: 8m (diameter)
Detection angle| 30° ~ 150º

Environment

Operation temperature -20°C ~ 55°C
Storage temperature Ta: -20°C ~ +70°C
Relative humidity 0 ~ 90%
IP rating IP20

PIR Sensor Properties (HIR13 & HIR16 & HIR62 & HIR62/R)

Sensor principle PIR detection
Operation voltage 5VDC
Detection range * HIR13

Max installation height: 15m (forklift)
12m (single person)
Max detection range: 24m (diameter)
HIR16
Max installation height: 15m (forklift)
12m (single person)
Max detection range: 18m 6m  (LW)
HIR62
Max installation height: 3m (forklift)
Max detection range: 12m (diameter)
HIR62/R
Max installation height: 12m (forklift)
8m (single person)
Max detection range: 20m  (forklift)
12m (single person)
Detection angle| 360°

***** The detection range is heavily influenced by sensor placement (angle) and different walking paces. It may be reduced under certain conditions.

PIR & microwave sensor heads

The range of PIR and microwave sensor heads below with Bluetooth modules built in offers powerful number of Plug’n’Play feature options to expand the flexibility of luminaires design. This approach to luminaire design reduces space requirements and component costs whilst simplifying production.

A. HBT01
Surface mounting
Photocell Advance™
The cable length is around 30cm.HYTRONIK HEC7030 BF LED Driver Sensor Head -
Photocell Advance B. HBT02
Surface mounting
Without motion sensor
Photocell Advance™
The cable length is around 30cm.HYTRONIK HEC7030 BF LED Driver Sensor Head -
Photocell Advance 2 C. HIR13/S
Surface mounting
For highbay application
IP65 (facia / lens part)
The cable length is around 30cm.HYTRONIK HEC7030 BF LED Driver Sensor Head -
Surface mounting D. HIR13/F
Flush mounting
For highbay application
IP65 (facia / lens part)
The cable length is around 30cm.HYTRONIK HEC7030 BF LED Driver Sensor Head -
Flush mounting E.HIR13/C
Screw to the luminaire by conduit
For highbay application
IP65 (facia / lens part)
The cable length is around 30cm.HYTRONIK HEC7030 BF LED Driver Sensor Head -
Screw F.HIR16
PIR sensor head
For highbay application
IP65 (facia / lens part)
The cable length is around 30cm.HYTRONIK HEC7030 BF LED Driver Sensor Head -
sensor head Installation for HIR16HYTRONIK HEC7030 BF LED Driver Sensor Head - plate
thickness We suggest that the metal plate thickness to be 0.8mm – 1.6mm to ensure perfect focal length for the PIR lens.
G. HIR62
PIR sensor head
The cable length is around 30cm.HYTRONIK HEC7030 BF LED Driver Sensor Head -
sensor head 2 H. HIR62 with HA04
PIR sensor head
The cable length is around 30cm.HYTRONIK HEC7030 BF LED Driver Sensor Head -
sensor head 3 I. HIR62 with HA05
PIR sensor head
The cable length is around 30cm.HYTRONIK HEC7030 BF LED Driver Sensor Head -
length is around J. HIR62/R
PIR sensor head
IP65 (facia / lens part)
The cable length is around 30cm.HYTRONIK HEC7030 BF LED Driver Sensor Head -
PIR sensor head

Detection Pattern

HBT01HYTRONIK HEC7030 BF LED Driver Sensor Head - Detection
Pattern The detection range is heavily influenced by sensor placement (angle) and different walking paces.
It may be reduced to 2m(diameter) & 3m(height) under certain conditions (walking across).

HIR13 (High-bay)

HIR13 (High-bay)

HYTRONIK HEC7030 BF LED Driver Sensor Head - lens
detection| HIR13 : High-bay lens detection pattern for __**forklif t @ Ta = 20OC (Recommendinstallation height 10m-15m** )
HYTRONIK HEC7030 BF LED Driver Sensor Head - movement| Mount height| Tangential (A)| Radial (B)
10m| max 380m2 (Ø = 22m)| max 201m2 (Ø = 16m)
11m| max 452m2 (Ø = 24m)| max 201m2 (Ø = 16m)
12m| max 452m2 (Ø = 24m)| max 201m2 (Ø = 16m)
13m| max 452m2 (Ø = 24m)| max 177m2 (Ø = 15m)
14m| max 452m2 (Ø = 24m)| max 133m2 (Ø = 13m)
15m| max 452m2 (Ø = 24m)| max 113m2 (Ø = 12m)

HYTRONIK HEC7030 BF LED Driver Sensor Head - lens
detectionHIR13: High-bay lens detection pattern for single person @ Ta = 20ºC (Recommended installation height 2.5m- 12m)HYTRONIK HEC7030 BF LED Driver Sensor Head - movement
2

Mount height Tangential (A) Radial (B)
2.5m max 50m² (Ø = 8m) max 7m² (Ø = 3m)
6m max 104m² (Ø = 11.5m) max 7m² (Ø = 3m)
8m max 154m² (Ø = 14m) max 7m² (Ø = 3m)
10m max 227m² (Ø = 17m) max 7m² (Ø = 3m)
11m max 269m² (Ø = 18.5m) max 7m² (Ø = 3m)
12m max 314m² (Ø = 20m) max 7m² (Ø = 3m)

HIR16HYTRONIK HEC7030 BF LED Driver Sensor Head - movement
speed

HIR62 HIR62/R

HYTRONIK HEC7030 BF LED Driver Sensor Head - movement speed
2| HYTRONIK HEC7030 BF LED Driver
Sensor Head - movement speed 3

***** The detection patterns are based upon 5km/h movement speed.

Dimming Interface Operation Notes

DALI
This series of products are supplied as ‘plug n’play DALI’ or ‘independent DALI’ system ready.
These models are also fully DALI addressable and may be assigned to groups within the limits specified by the DALI protocol or supporting DALI controllers by using a DALI programming tool.

Switch-Dim
The provided Switch-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switches.
Up to 64 LED drivers maybe connected to one switch.

Switch Action
Short press (<0.4 second)
Note: short press has to be longer than 0.1s, or it will be invalid.| Response
Toggle light on / off
---|---
Long press (>0.4 second)| Toggle dim light / increase brightness

Synchronization

Switch Action Response
Long press (>15 seconds) All lights will dim down to minimum then return to

50% brightness

  • We recommend the number of drivers connected to a switch does not exceed 25 pieces. The maximum length of the wires from push to driver should be no more than 20 meters.

Additional Information / Documents

  1. For full explanation of Hytronik Photocell Advance™ technology, please kindly refer to www.hytronik.com/download ->knowledge ->Introduction of Photocell Advance
  2. To learn more about detailed product features/functions, please refer to www.hytronik.com/download ->knowledge ->Introduction of App Scenes and Product Functions
  3. Regarding precautions for Bluetooth product installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->Bluetooth Products – Precautions for Product Installation and Operation
  4. Regarding precautions for microwave sensor installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->Microwave Sensors – Precautions for Product Installation and Operation
  5. Regarding precautions for PIR Sensors installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->PIR Sensors – Precautions for Product Installation and Operation
  6. Regarding precautions for LED driver installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->LED Drivers – Precautions for Product Installation and Operation
  7. Data sheet is subject to change without notice. Please always refer to the most recent release on www.hytronik.com/products/bluetooth technology ->Bluetooth Drivers
  8. Regarding Hytronik standard guarantee policy, please refer to www.hytronik.com/download ->knowledge ->Hytronik Standard Guarantee Policy

Subject to change without notice.
Edition: 11 Jul. 2022 Ver. A2HYTRONIK logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

HYTRONIK User Manuals

Related Manuals