Simply Retrofits FTSP48T5HEDF16W-40-7 LED T5 Tube Instruction Manual
- June 12, 2024
- Simply Retrofits
Table of Contents
Simply Retrofits FTSP48T5HEDF16W-40-7 LED T5 Tube
Product Information
The FT-16W & 25.5W LED T5 Direct Fit S Series LED Lamps by Fotonz are energy- saving retrofit solutions for replacing traditional fluorescent lamps. These LED tubes can work on most instant-start electronic ballasts without the need for replacing the ballasts or any additional rewiring. They offer high-quality light output, significant energy savings, and virtually zero maintenance costs. The FT LED T5 lamps are shatterproof and NSF certified, making them ideal for use in the food and health industry. The shatterproof glass is coated with PET for added durability and safety.
These LED T5 lamps have a wider lighting area and are designed for direct fit
installation. They are compatible with a range of ballasts, including 120-277V
and 347V, making them suitable for both old and new buildings. The product
comes with a 5-year limited warranty and is not rated for use in fully
enclosed fixtures. Fotonz Instant Fit LED T5 tube is the ideal energy-saving
retrofit solution for replacing traditional fluorescent lamps. It can work on
most instant-start electronic ballasts without requiring replacing the
ballasts or any additional rewiring. It saves energy and produces high quality
light with virtually zero maintenance costs
Product Usage Instructions
- Ensure that the power supply is turned off before installing or replacing the LED T5 lamp.
- Remove the existing fluorescent lamp from the fixture by gently twisting and pulling it out.
- Insert the Fotonz LED T5 lamp into the fixture, aligning the pins with the corresponding slots in the socket.
- Gently push the LED T5 lamp into the socket until it is securely in place.
- Turn on the power supply and verify that the LED lamp is functioning properly.
- If any issues are encountered, ensure that the ballast is compatible with the LED T5 lamp and that it is properly installed.
TECHNICAL SPECIFICATIONS
CONSTRUCTION
- Frosted Glass Tube with PET cover
- Medium Bi-Pin G13 Base
APPLICATION
- Food Industry Lighting
- Office Lighting
- Retail Lighting
- Warehouse lighting
- Industrial lighting
- Hospital lighting
ELECTRICAL
- Has operating voltage of 120-277V or 347V determined by ballast
- CRI 82
- Beam Angle 160°
- Power Factor >0.9
- Dimming – depends on the Ballast
- Operating Temperature of -20°C – 45°C (-4° F to 113°F)
- Dimension 48.82” x 8.46” x 7.68”
LISTINGS & RATINGS
- UL, cUL, DLC listed
- Dry, Damp Enivronment
- NSF certfied
- Rated Lifetime of L70 50,000 hrs
INSTALLATION
- Not rated for use in fullly enclosed fixtures.
WARRANTY
- 5 years Limited Warranty
ORDERING INFORMATION
Please refer to the provided model numbers, DLC wattage, CCT (color temperature), initial lumens, and efficacy LM/W for selecting the appropriate Fotonz LED T5 lamp for your specific requirements. For further assistance, visit www.simplyretrofits.com.
PROJECT:
TYPE:
NOTES:
www.simplyretrofits.com