Simply Retrofits 4 Inch RGB WiFi Smart Slim Panel Instructions
- June 9, 2024
- Simply Retrofits
Table of Contents
Simply Retrofits 4 Inch RGB WiFi Smart Slim Panel
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Instructions about the risk of fire, electric shock, or injury to persons.
WARNING
Recessed downlight installation requires knowledge of luminaire electrical
systems. Installation should be done by a certified electrician. To prevent
wiring damage or abrasion, do not expose wiring to the edges of sheet metal or
other sharp objects. Suitable for damp Location Energy Star rated, IC-rated
for direct contact with insulation, airtight rated, and ETL certified listed
compliant.
Compatible fixtures
(sold separately):
- WIFI 4″ Slim Round Panel LED
Warranty
- offers a warranty of 5 years from the date of purchase that covers repair or replacement of defective pats of the housing, optics, and electronics.
Instructions Before Installation
- BEFORE STARTING INSTALLATION, SHUT THE LINE FEED POWER OFF USING THE CIRCUIT BREAKER.
Installation instructions
- Drill hole in ceiling and prepare supply wires. Install and unshield the line feed wire 12( 30 cm) and strip wires 5/8″ (1.6 cm). Bring supply power to junction box through knockout
- Open the lid of the junction box. Use the wirenuts to match the white wire from the line feed with the white wire of the junction box, to match the black wire from the line feed with the black wire of the junction box and to match the copper wire from the line feed and with the green wire of the junction box.
- Route junction box through cut-out and connect recessed LED pannel to junction box with the quick connector.
- Compress the springs and push the fixture in the opening. It is easier to do one spring at a time.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>