Simply Retrofits 100W-3CCT LED Area-Parking Light Instruction Manual
- June 10, 2024
- Simply Retrofits
Table of Contents
Simply Retrofits 100W-3CCT LED Area-Parking Light
Introduction
- This LED Flood light uses the latest in solid state lighting technology for long life, low maintenance, and high efficiency.
- There are Multiple installation methods, suitable for various occasion.
Warning:
To avoid the risk of fire, explosion, or electric shock, this product should be installed, inspected, and maintained by a qualified electrician only, in accordance with all applicable electrical codes.
To avoid electric shock:
-
Be certain electrical power is OFF before and during installation and maintenance.
-
Luminaire must be connected to a wiring system with an equipment grounding conductor.
To avoid explosion: -
Make sure the supply voltage is the same as the rated luminaire voltage.
-
Do not install where the marked operating temperatures exceed the ignition temperature of the hazardous atmosphere.
-
Do not operate in ambient temperatures above those indicated on the luminaire nameplate.
-
Keep lens tightly closed when in operation.
For supply connections use wire rated for at least 90 ° C
After installation, please
- check whether the lighting fixture is firmly fixed.
- check whether wires are connected correctly.
- At last, turn on the power, and check if the lighting fixture works well. If not, please turn off the power and contact with local dealer.
SF
TR
