Simply Retrofits 3CCT 9 Inch Slim Square Flush Mount Installation Guide
- June 9, 2024
- Simply Retrofits
Table of Contents
Simply Retrofits 3CCT 9 Inch Slim Square Flush Mount
IMPORTANT SAFETY INFORMATION
- WARNING: RISK OF SHOCK House electric current can cause painful shock or serious injury unless handled properly. For your safety, always remember to :
- A: Turn off the power supply at the fuse or circuit breaker box before you install the fixture.
- B: Ground the fixture to avoid potential electric shocks and to ensure reliable starting.
- C: Double-check all connections to be sure they are tight and correct.
- D: Wear rubber soled shoes and work on a sturdy wooden ladder.
- This fixture is designed for use in a circuit protected by a fuse or circuit breaker. It is also designed to be installed in accordance with local electrical codes. If you are unsure about your wiring, consult a qualified electrician or local electrical inspector, and check your local electrical code.
- WARNING: RISK OF CUTS Some metal parts in the fixture may have sharp edges. To prevent cuts and scrapes, wear gloves when handling the parts.
- Account for small parts and destroy packing material, as these may be hazardous to children.
Product Specification
Surface mounting installation
- Fix the installation Bracket.
- Connecting the wire.
- Press the light to fit the bracket and Rotate clockwise.
Caution
- WARNING: Risk of fire. Use ACl 20 50/60Hz circuits.
- Suitable for damp locations. Before installing your lighting fixture, thoroughly review enclosed installation manual. If you do not have sufficient electrical wiring experience, please refer to a do-it-yourself wiring handbook or have your fixture installed by a qualified licensed electrician. All electrical connections must be in a accordance with local and National Electrical Code(NEC) standards. Reliable operating temperature is -20 to +40 degrees Celsius(-4 to+ 104 degrees Fahrenheit).
- pis obey fire prevention regulations, do not cover the fixture with any heat insulated materials.
- Do not change the LED light source or driver inside under any circumstance.
Warranty
5 years warranty
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>