Simply Retrofits VO-RP3W7-120-D-3WY 3-Way CCT Adjustable 3 Inch Slim Round Panel Instruction Manual
- June 9, 2024
- Simply Retrofits
Table of Contents
Simply Retrofits VO-RP3W7-120-D-3WY 3-Way CCT Adjustable 3 Inch Slim
Round Panel
IMPORTANT SAFETY INSTRUCTIONS
Instructions about the risk of fire, electric shock, or injury to persons.
WARNING:
- Recessed downlight installation requires knowledge of luminaire electrical systems. Installation should be done by a certified electrician.
- To prevent wiring damage or abrasion, do not expose wiring to the edges of sheet metal or other sharp objects.
Suitable for damp Locations
Energy Star rated, IC-rated for direct contact with insulation, airtight
rated, and ETL certified listed compliant
Choosing a color temperature before installing
Use the slide switch to choose a color temperature before installing. 5000K (5K), 4000K (4K),3000K (3K).
3-way color changing
- You can lock in one color temperature, change among multiple color temperatures, and dim from 10%-100%.
- When the slide switch is set to 3K, the color temperature is set at 3000K.
- When the slide switch is set to 4K, the color temperature is set at 4000K.
- When the slide switch is set to 5K, the color temperature is set at 5000K.
Connecting the lamp body with the driver
Compatible fixtures (sold separately)
VO-RP3W7-120-D-3WY
- 3Way CCT Adjustable 3″ Slim Round Panel
Installation instructions
WARNING
BEFORE STARTING INSTALLATION, SHUT THE LINE FEED POWER OFF USING THE
CIRCUIT BREAKER.
- Drill holes in the ceiling and prepare supply wires. Install and unshield the line feed wire 12( 25cm) and strip wires 5/8″ (1.6 cm). Bring supply power to the junction box through knockout.
- Open the lid of the junction box. Use the wire nuts to match the white wire from the line feed with the white wire of the junction box, to match the black wire from the line feed with the black wire of the junction box, and to match the copper wire from the line feed and with the green wire of the junction box.
- Route the junction box through the cut-out and connect the recessed LED panel to the junction box with the quick connector.
- Compress the springs and push the fixture in the opening. It is easier to do one spring at a time.
See reverse side for more instructions
www.simplyretrofits.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>