Simply Retrofits LED Mini 30W Wall Pack Light Instructions
- June 9, 2024
- Simply Retrofits
Table of Contents
Simply Retrofits LED Mini 30W Wall Pack Light Instructions
LED Wall Pack Light Instruction
Application:
Available in industrial lighting, landscape lighting, courtyard, building, hotel, building exterior, etc.
Caution:
- Can not use the electric generator to test the LED lamp.
- Please abide by related country, regional and local law and regulations when install this fixture.
- Please don’t install the fixture when raining to lower the risk of electric shock and avoid the failure.
Note:
- To avoid possibility of electrical shock or fire, the installation personnel must have professional electric knowledge.
- Please wear gloves to avoid injury before installation.
- If any smoke or spark of the wire happened, please turn off the power immediately and notify relevant personnel. Installation I:
Installation I:
-
Peel off the yellow sticker and paste it on the round area of the bottom plate
-
Make sure good wiring and screws fastening, then turn on the power
Installation II:
-
Return on the fixture to the bottom plate and tighten it with screws
-
Turn on the power after make sure good wiring and insulation
Standard wire:
MIN 75 °C SUPPLY CONDUCTOR
LED Wall Pack Light Instruction
6. Make wiring connection and make sure
the good protection
8. Turn on the power after make sure
good wiring and insulation
OFF
ECONSUL T A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT THIS
PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE
BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND
THE HAZARDS INVOLVED LES FILS D’ALIMENTATION 75 °C MIN CONDUCTOR CONSULTER UN
ELECTRICIEN QUALi FiE POUR VOUS ASSURER QUE LES CONDUCTEURS DE LA DERIVATION
SONT ADEQUATS CE PRODUIT DOIT l::VTRE INSTALLE SELON LE CODE D’INSTALLATION
PERTINENT, PAR UNE PERSONNE QUI CONNAIT BIEN LE PRODUIT ET SON
FONCTIONNEMENT AINSI QUE LERISQUES INHERENTS