SKYDANCE PB-12A-2 Zigbee 3.0 Constant Current CCT LED Driver User Manual
- June 12, 2024
- SKYDANCE
Table of Contents
SKYDANCE PB-12A-2 Zigbee 3.0 Constant Current CCT LED Driver User Manual
Zigbee 3.0 Constant Current CCT LED Driver
Model No.: PB-12A-2(WZS)
Features
- Tuya APP cloud control, support color temp and brightness adjust, delay turn on/off, timer run, scene edit, sleep wake-up and biorhythms function
- Philips HUE APP control by connect with Philips HUE bridge
- Voice control, support Alexa, Google, Amazon ECHO and TmallGenie smart speaker
- Can relay and route to each other, up to 15 hops
- Match with Zigbee 3.0 remote or scene panel control optional
- Universal AC input / Full range
- Flicker-free
- 2 channel constant current output, congurable current via DIP switch
- Over-load / Short circuit protection, recover automatically
- Full protective plastic case
- Suitable for indoor LED lighting application
- 5 Year, 50,000hr warranty
Applications
- Suitable for downlight, spotlight and decorative applications.
- Ofce / Commercial / Domestic Lighting, Hotels, Classrooms, Warehouse, Health care, Retail and Display.
- Use for retrot upgrades & new luminaire designs.
Mechanical Structures and Installations
Technical Parameters
| Output | Output Voltage | 10～42VDC |
|---|---|---|
| Output Current | 2x(150~450)mA | |
| Output Power | Max.12W | |
| Max Output Voltage | 48VDC | |
| Dimming Range | 0~100％ | |
| PWM Frequency | 4000Hz | |
| Current Accuracy | ±5％ | |
| Input | Input Voltage Range | 100~240VAC |
| Frequency Range | 50/60Hz | |
| Efficiency | 80% | |
| Input Current | 0.35A Max. | |
| Anti Surge | L-N:1.2KV | |
| Startup time | 1S/230VAC | |
| Inrush Current | Cold start 14.5A at 230VAC | |
| Leakage Current | < 0.5mA/230VAC | |
| No Load Power | <2W | |
| Protection | Overload | Hiccup, recovers automatically affer fault condition is |
removed
Short circuit| Hiccup, recovers automatically affer fault condition is removed
Environment| Woking Temperature| -20℃~50℃
T-case Max| 80℃
Working Humidity| 20％~90％RH, non-condensing
Storage Temp/Humidity| -40℃~80℃, 10％~95％RH
Temperature Coef?cient| ±0.03％/℃ (0-50％)
Vibration Resistance| 10-500Hz, 2G, 6min/cycle, X,Y,Z axes/2min
IP Rating| IP20
Safety & EMC| Security Speci ?cations| IEC/EN61347-1, IEC/EN61347-2-13
Withstand Voltage| I/P-O/P: 3750VAC
Insulation Resistance| I/P-O/P: 100M/500VDC/25℃/70％RH
EMC Emission| EN61000-3-2 Class C, IEC61000-3-3
EMC Immunity| EN61000-4-2.3.4.5.6.8.11, EN61547
Certications| CE
LED Current Selection:
| | | | |
---|---|---|---|---|---
Uou| 10-42V| 10-42V| 10-34V| 10-27V
Iout| 150mA| 250mA| 350mA| 450mA
System wiring
Note:
- The above distance is measured in spacious (no obstacle) environment, Please refer to the actual test distance before installation.
- Please check if the WiFi router net in 2.4G band, the 5G band is not available, and do not hide your router network.
- Please keep the distance between LED driver and router close, and check the WiFi signals.
- Users must use the Tuya ZigBee gateway to realize remote control and voice control (The smart panel integrate Zigbee gateway function).
App Operating Instructions
- Network pairing
- Download the Tuba APP and register an account, search and add the Tuya ZigBee gateway device
- Download the Taya APP and register an account, search and add the Tuya Zigbee gateway device
- Quickly press the “RESET NET” button five times or repeat power on and off five times to clear the previous network connection, enter pairing mode with the output light breathes blinking.
- Under the gateway, search and add new device. If the network connection is successful, you can find ZBS-CCT devices in Tuya APP.
- Lighting control settings
After pairing the light device, click the device and change brightness and color temperature by touch brightness slide and color wheel.
In “Scene”, there are 4 scene can be recalled or customized.
In “Setting”, there are Plan, Schedule, Timer, Rhythms, Power-on behavior functions.
