HYTRONIK HIR60 PIR Motion Sensor Owner’s Manual

HIR60 PIR Motion Sensor
Owner’s Manual

**5.0 PIR Motion Sensor with
HIR60 HIR60/R
Low bay Mid bay with IP65**

HIR60 PIR Motion Sensor

Product Description

HIR60 & HIR60/R are Bluetooth 5.0 SIG mesh PIR motion sensors, designed with Zhaga D4i (Book 20 connection) that enables lighting designers/manufactures to freely connect to Zhaga Book 20 LED Drivers via  plug’n’play. It’s embedded with Bluetooth module, PIR sensor and also a daylight sensor, and yet comes with a surprisingly super-mini size! With Bluetooth wireless mesh networking, it makes communication  between luminaires much easier without time-consuming hardwiring, which is always a headache especially for old buildings – you do not need any extra wirings to upgrade old buildings with smart lighting! Meanwhile, simple device setup and commissioning can be done via koolmesh™ app.

App Features

| Quick setup mode & advanced setup mode
---|---
| Tri-level control
| Daylight harvest
| Circadian rhythm (Human centric lighting)
| Floorplan feature to simplify project planning
| Web app/platform for dedicated project management
| Kool mesh Pro iPad version for on-site configuration
| Grouping luminaires via mesh network
| Scenes
| Detailed motion sensor settings
| Dusk/Dawn photocell (Twilight function)
| Push switch configuration
| Schedule to run scenes based on time and date
| Astro timer (sunrise and sunset)
| Staircase function (master & slave)
| Internet-of-Things (loT) featured
| Device firmware update over-the-air (OTA)
| Device social relations check
| Bulk commissioning (copy and paste settings)
| Dynamic daylight harvest auto-adaptation
| Power-on status (memory against power loss)
| Offline commissioning
| Different permission levels via authority management
| Network sharing via QR code or keycode
| Remote control via gateway support HBGWO1
| Interoperability with Hytronik Bluetooth product portfolio
| Compatible with EnOcean BLE switches
| Continuous development in progress…

Hardware Features

| 5-in-1: Bluetooth 5.0 + Zhaga + D4i + PIR motion sensor + Daylight sensor
---|---
| Optional accessories for different mounting style
|  Super compact mini size
| Plug’n’Play via Zhaga Book 20 connection
| 5-year warranty
| IP65 rated design for HIR60/R
|  coming soon…
|  coming soon…

Web app/platform: www.iot.koolmesh.com

Technical Specifications

Bluetooth Transceiver|
---|---
Operation frequency| 2.4 GHz – 2.483 GHz
Transmission power| 4 dBm
Range (Typical indoor)| 10~30m
Protocol| **** 5.0 SIG Mesh
Environment|
---|---
Operation temperature| Ta: -20°C ~ 50°C
Storage temperature| -40°C ~ +70°C
Relative humidity| 10 ~ 90%
IP rating| IP20

PIR Sensor Properties (HIR60 & HIR60/R)

Max installation height：3m
Max detection range (Ø)：12m
HIR60/R
Max installation height：8m (for person)
Max installation height：12m (for forklift)
Max detection range (Ø)：20m
Detection angle| 360°

• The detection range is heavily inuenced by sensor placement (angle) and different walking paces. It may be reduced under certain conditions.

Optional Accessories

Demonstration of installation for transparent version

Mechanical Structure & Dimensions

Wire Preparation

To make or release the wire from the terminal, use a screwdriver to push down the button.

Wiring Diagram

DALI Driver

Detection Pattern – – Diagram 2
The data below is tested under following conditions:

• Forklift driving;
• Sensor not connected to any driver that may have soft-on period;
• Testing temperature Ta = 20°C;
• The testing is conducted in an open and spacious indoor field, without noticeable obstacles or influences that may affect PIR performances.

Detection Pattern – – Diagram 3
The data below is tested under following conditions:

• Single person walking;
• Sensor not connected to any driver that may have soft-on period;
• Testing temperature Ta = 20°C;
• The testing is conducted in an open and spacious indoor field, without noticeable obstacles or influences that may affect PIR performances.

Placement Guide and Typical Range

The smart device with the App installed will have a typical range of 10m, but varies from device to device. During commissioning, the installer will need to be in range of the devices when searching for devices to add to the network.
Once the devices have been added to the network via the App, the devices will start communicating within the wireless mesh. This means that once the network is complete, all devices are accessible from the smart  device when in a 20m range of a single point.

Additional Information / Documents

1. To learn more about detailed product features/functions, please refer to www.hytronik.com/download ->knowledge ->Introduction of App Scenes and Product Functions
2. Regarding precautions for Bluetooth product installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->Bluetooth Products – Precautions for Product Installation and Operation
3. Regarding precautions for PIR Sensors installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->PIR Sensors – Precautions for Product Installation and Operation
4. Data sheet is subject to change without notice. Please always refer to the most recent release on www.hytronik.com/products/bluetooth technology ->Bluetooth Sensors
5. Regarding Hytronik standard guarantee policy, please refer to www.hytronik.com/download ->knowledge ->Hytronik Standard Guarantee Policy

Subject to change without notice.
Edition: 15 Jun. 2022 Ver. A2

Documents / Resources

| HYTRONIK HIR60 PIR Motion Sensor [pdf] Owner's Manual
HIR60 PIR Motion Sensor, HIR60, PIR Motion Sensor, Motion Sensor, Sensor
---|---

References

• iot.koolmesh.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>