SKYDANCE TE-36A Triac Constant Current LED Driver Owner’s Manual

SKYDANCE TE-36A Triac Constant Current LED Driver

Product Information

The Triac Constant Current LED Driver, Model No.: TE-36A, is a versatile LED driver designed for indoor LED lighting applications. It features multiple dimming options, over-heat protection, over-load protection, and short circuit protection. The driver has a 5-year warranty and is suitable for retrofit upgrades and new luminaire designs.

Features:

• Dimming interface: Triac/ELV, AC Push-Dim
• Compatible with leading edge/trailing edge Triac dimmers and dimming systems
• PWM digital dimming without altering LED color rendering index
• 1 channel constant current output with configurable current via DIP switch
• Over-heat / Over-load / Short circuit protection with automatic recovery
• Full protective plastic case
• Suitable for downlight, spotlight, and decorative applications
• 5-year warranty with a lifespan of 50,000 hours

Technical Parameters:

• Output Voltage: 10-52VDC
• Output Current: 350-1200mA
• Output Power: Max. 36W
• Max. Output Voltage: 58VDC
• Dimming Range: 0-100%
• PWM Frequency: 10-100Hz
• Current Accuracy: ±3%
• Input Voltage Range: 200-240VAC
• Frequency Range: 50/60Hz
• Efficiency: >85%
• Inrush Current: <20A
• Leakage Current: <0.5mA
• No Load Power: <0.5W
• Over Load Power: Auto-recovery
• Short Circuit: Auto-recovery
• Over Temperature: Auto-recovery
• Working Temperature: -20°C to +40°C
• T-case Max Working Humidity: 20-90% RH non-condensing
• Storage Temp/Humidity: -40°C to +80°C / 10-95% RH non-condensing
• Temperature Coefficient: ±0.03%/°C
• Vibration Resistance: 5-55Hz / 2g
• IP Rating: IP20
• Security Specifications: EN61000-4-2.3.4.5.6.8.11, EN61547
• Insulation Resistance: >5MΩ
• EMC Emission: CE, EMC
• EMC Immunity: Compliant with relevant standards
• Certifications: CE, EMC

Applications:

The TE-36A Triac Constant Current LED Driver is suitable for a wide range of applications, including:

• Office / Commercial / Domestic Lighting
• Hotels
• Classrooms
• Warehouse
• Healthcare
• Retail and Display

Product Usage Instructions

Wiring Diagram:

Refer to the following wiring diagrams for different connection configurations:

1. Connect Triac dimmer (no Neutral wire):
2. Connect Triac dimmer (with Neutral wire):
3. Connect AC Pushswitch:

Triac Dimming Input:

When connected with a Triac dimmer, such as Lutrom, Clipsal, or Dynalite dimmer, please note that different Triac dimmers from different suppliers may have different minimum dimming levels. Ensure that the dimmer supports a minimum dimming level of 1% to achieve dimming to the lowest level.

AC Push-Dim Input:

The AC Push-Dim interface allows for simple dimming using commercially available non-latching (momentary) wall switches. The following actions can be performed:

• Short press: Turn on or off the light.
• Long press (1-6s): Press and hold to achieve step-less dimming. With every other long press, the light level goes in the opposite direction.

Please refer to the user manual version 1.0.4 for more details on installation, troubleshooting, and safety instructions.

Model No.: TE-36A

Features

• Dimming interface: Triac/ELV, AC Push-Dim
• Apply to leading edge/trailing edge Triac dimmers and dimming system
• PWM digital dimming, no alter LED color rending index
• 1 channel constant current output, configurable current via DIP switch
• Over-heat / Over-load / Short circuit protection, recover automatically
• Full protective plastic case
• Suitable for indoor LED lighting application
• 5 Year, 50,000hr warranty

Mechanical Structures and Installations

Technical Parameters

LED Current Selection:

Applications

• Suitable for downlight, spotlight and decorative applications.
• Office / Commercial / Domestic Lighting, Hotels, Classrooms, Warehouse, Health care, Retail and Display.
• Use for retrofit upgrades & new luminaire designs

Wiring Diagram

1. Connect Triac dimmer(no Neutral wire)
2. Connect Triac dimmer(with Neutral wire)
3. Connect AC Push switch

Triac Dimming Input

While connected with a Triac dimmer, such as Lutrom, Clipsal, Dynalite dimmer, different Triac dimmers from different suppliers may have different minimum dimming levels which the driver can not be dimmed below. To dim to 1%, please make sure the dimmer supports 1% minimum dimming level.

AC Push-Dim input

The provided AC Push-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switchs.

• Short press:
  • Turn on or off light.
• Long press (1-6s):
  • Press and hold to step-less dimming,
  • With every other long press, the light level goes to the opposite direction.
• Dimming memory:
  • Light returns to the previous dimming level when switched off and on again, even at power failure.
• Synchronization:
  • If more than one LED driver are connected to the same push switch, do a long press for more than 10s, then the system is synchronized and all lights in the group dim up to 100%.
  • This means there is no need for any additional synchrony wire in larger installations.
  • We recommend the number of LED drivers connected to a push switch does not exceed 25 pieces,
  • The maximum length of the wires from push to LED driver should be no more than 20 meters.

Dimming Curve

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>