SKYDANCE DV 0/1-10V Dimmer Owner’s Manual
- June 12, 2024
- SKYDANCE
Table of Contents
SKYDANCE DV 0/1-10V Dimmer
Product Information
The DALI 0/1-10V Dimmer Model No.: DV is a high-quality dimmer designed for
controlling lighting systems. It features 2 DALI addresses and 2 channel
0/1-10V output, making it suitable for various lighting applications. The
dimmer supports high voltage AC input and offers one high voltage AC relay
output. It is compliant with the DALI standard protocol IEC 62386-101, IEC
62386-102, and IEC 62386-206, making it compatible with DALI products from
other international incorporation.
The dimmer allows for manual assignment of DALI addresses, which can be
displayed digitally. Alternatively, the addresses can be automatically
assigned by a DALI master controller. With selectable 0-10V or 1-10V output,
the dimmer provides flexibility in dimming options. It operates within a
temperature range of -30°C to +55°C and has a maximum case temperature of
+60°C. The dimming range is from 0% to 100% with a linear dimming curve.
The product dimensions are L190mm x W48mm x H25mm, and it weighs 0.140kg. It
has an IP rating of IP20, indicating its protection against solid objects
larger than 12mm and no protection against water.
Product Usage Instructions
Setting 0/1-10V Output Mode
- Long press both buttons simultaneously for 2 seconds to enter the output mode setting.
- Press the left or right button to change the output mode between 1-10V or 0-10V.
- To confirm the selected output mode, long press any of the two buttons for 2 seconds or wait for a timeout of 10 seconds.
Setting DALI Address via Buttons
- Long press any of the two buttons for 2 seconds to prepare for setting the start DALI address. The digital display will start flashing.
- Short press the left button to set the tens position and the right button to set the units position of the address.
- The address can be set from 00 to 62-FF. If no DALI address is assigned, the digital display will show FF.
- The address assignments are sequential. For example, if the set address value is 01, the CH1 address value will be 01, and the CH2 address value will be 02. The display will show the CH1 address value.
- To confirm the set DALI address, long press any of the two buttons for 2 seconds or wait for a timeout of 10 seconds.
DALI Address Assigned by DALI Masters:
The DALI address can also be assigned automatically by a DALI Master controller. Please refer to the user manual of compatible DALI Masters for specific operations. During the automatic assignment, the digital display will show “AU.” Once the address is assigned, the digital display will show the start DALI address followed by a two-digit number (xx) ranging from 00 to 63.
Model No.: DV
DALI 0/1-10V Dimmer
AC input/2 DALI address/2 channel 0/1-10V signal output
Features
- 2 DALI address, 2 channel 0/1-10V output.
- High voltage AC input, one high voltage AC relay output.
- 0-10V or 1-10V output selectable.
- In accordance with DALI standard protocol IEC 62386-101, IEC 62386-102, IEC 62386-206 and in compliance with DALI products from other international incorporation.
- DALI address can be manually assigned and shown in digital display or automatically assigned by DALI master.
Technical Parameters
Input and Output
Input voltage| 100-240VAC
Output signal| 2 x (1/1-10)VDC
Output current| 2CH,20mA/CH
Environment
Operation temperature| Ta: -30 OC ~ +55OC
Case temperature (Max.)| Tc: +60 OC
IP rating| IP20
Dimming data
Input signal| DALI
Dimming range| 0 -100%
Dimming curve| Linear
Package
Size| L190x W48 x H25mm
Gross weight| 0.140kg
|
Safety and EMC
EMC standard (EMC)
| ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Safety standard(LVD)| EN 62368-1:2020+A11:2020
Certi cation| CE,EMC,LVD
Warranty
Warranty| 5 years
|
Mechanical Structures and Installations
Wiring Diagram
Note:
We recommend the number of LED drivers connected to 0/1-10V dimmer (each
channel) does not exceed 20 pieces, The maximum length of the wires from
dimmer to LED driver should be no more than 30 meters.
Operation
Set 0/1-10V output mode
- Long press two buttons at the same time for 2s, switch between 1-10V output or 0-10V output.
- Press the left / right button to change the output mode.
- Long press any of the two buttons for 2s or timeout 10s, quit output mode setting
| Mode | Channel Output |
|---|---|
| 00 | CH 1:0-10V CH 2:0-10V |
| 01 | CH 1:0-10V CH 2:1-10V |
| 10 | CH 1:1-10V CH 2:0-10V |
| 11 | CH 1:1-10V CH 2:1-10V |
Set DALI Address via buttons
- Long press any of the two buttons for 2s, prepare for set the start DALI address, digital display start flashes.
- Short press left button to set “tens” position and right button to set “units” position.
- The address can be set from 00~62-FF. no DALI address is assigned for the dimmer, digital display shows “FF”.
- Address assignments are sequential. If the set address value is 01, the CH1 address value is 01, and the CH2 address value is 02, The display shows the CH1 address value.
- Long press any of the two buttons for 2s or timeout 10s, quit start DALI address setting, digital display stop flashes.
DALI address assigned by DALI masters
- DALI address can also be assigned by DALI Master controller automatically.
- Please refer to user manuals of compatible DALI Masters for specifc operations.
- The digital display will show “AU” When the DALI master is assigning address.
- After the address is assigned, the digital display will show the start DALI address”xx”, xx is from 00 to 63.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>