SKYDANCE TS4 3.0 Wall Mounted Touch Panel Instruction Manual
- June 12, 2024
- SKYDANCE
Table of Contents
SKYDANCE TS4 3.0 Wall Mounted Touch Panel
Model No.: TS4(WZS)
- 4 Scene button/Zigbee 3.0/Glass touch panel/AC input
Features
- 4-button touch scene panel remote with scene recall function.
- Built-in Tuya Zigbee 3.0 remote module, supports scenario linkage and one-click execution.
- Set scene function through Tuya APP.
- Ultra sensitive high strong glass touch panel.
- Each button with blue LED indicator.
- Customizable button words.
- Provide a variety of Chinese/English scene button posters, which can flexibly define the functions of each button.
Technical Parameters
Input and Output
Input voltage| 100-240VAC
Input current| Max 0.1A
Output signal| Zigbee 3.0
Dimming data
Input signal| Touch key
Remote distance| 30m(Barrier-free space)
Safety and EMC
EMC standard (EMC)
| ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Safety standard(LVD)| EN 62368-1:2020+A11:2020
Radio Equipment(RED)| ETSI EN 300 328 V2.2.2
Certification| CE, EMC, LVD, RED
Warranty| 5 years
Environment
Operation temperature| Ta: -30 OC ~ +55 OC
Case temperature (Max.)| Ta: +65 OC
Package|
Size| L112x W112 x H50mm
Gross weight| 0.223kg
|
Mechanical Structures and Installations
Installation diagram
Typical base as below
Key function
- Short press the scene button to recall the corresponding scene and the blue indicator lights up.
- Before using the scene panel, please edit the scene setting through Tuya APP first.
App Operating Instructions
Network pairing
- Download the Tuya APP and register an account, search, and add the Tuya Zigbee gateway device.
- Press and hold the “Scene 1” and “Scene 4” buttons until the 4 LED indicator light flashes.
- Under the gateway, you can find the WZS-Scene Panel device in Tuya APP.
- After successful network pairing, the 4 LED indicator lights will be on for 2 seconds and then off.
- Under the gateway, search and add one or more ZBS-DIM, ZBS-CCT, ZBS-RGB, ZBS-RGBW, and ZBS-RGB+CCT light devices.
- Scene panel unpairing: Delete the WZS-Scene Panel device from the Tuya APP.
Remote association and scene settings
- There are 8 scenes in the Tuya APP, which can be set to lighting scenes or linkage scenes.
- Lighting scene is used for the overall control of multiple lamps, like the light adjustment of the entire room.
- Linkage scene is used for linkage control of different equipment, such as lamps and curtains on and off together.
Example 1, set scene 1 for synchronous light control of the whole room:
- Select Scene 1 and open the lighting scene settings.
- You can change the scene name, add one or more devices, adjust brightness and color, then save it.
- After successful setting, you can use the remote to control these lamps directly.
Example 2, set scene 2 to set up a scenario where different lamps or curtains are controlled together with different colors or on/off states.
- Select Scene 2 and open the linkage scene settings.
- You can change the scene name, add “one-click execution” tasks, select the devices that need to be linked, and save the required functions, such as ON/OFF, mode, brightness, and color temperature.
- After successful setup, you can use the remote to directly control all linked devices to the desired scene.
Note
- The scene1-4 in Tuya APP is correspond to the scene 1-4 button on the scene panel.
- You can select one scene button to set the ALL OFF linkage scene function to turn off all lights.
- To delete the scene function, you can select “Reset” in the scene settings.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>