Skydance Zigbee 3.0 Wall Mounted Scene Panel Instruction Manual
- June 12, 2024
- SKYDANCE
Table of Contents
Skydance Zigbee 3.0 Wall Mounted Scene Panel
Product Information
The Zigbee 3.0 Wall Mounted Scene Panel is available in two models: PK4(WZS) and PK8(WZS). It features 4 or 8 scene buttons and supports AC input. The panel has a built-in Tuya Zigbee 3.0 remote module, allowing for scenario linkage and one-click execution. Users can set scenes through the Tuya APP, and each button on the panel has a blue LED indicator. The button words are customizable. The panel is designed for easy installation and comes with a 5-year warranty.
Safety and EMC
- EMC standard (EMC): ETSI EN 301 489-1 V2.2.3
- Safety standard (LVD): EN 62368-1:2020+A11:2020
- Radio Equipment (RED) Certification: ETSI EN 300 328 V2.2.2
Features
- 4/8 button scene panel is remote with scene recall.
- Built-in Tuya Zigbee 3.0 remote module, supports scenario linkage and one-click execution.
- Set scene function through Tuya APP.
- Each button has a blue LED indicator.
- Customizable button words.
Technical Parameters
Input and Output
Input voltage| 100-240VAC
Input current| Max 0.1A
Output signal| Zigbee 3.0
Remote distance| 30m(Barrier-free space)
Warranty
Warranty| 5 years
Safety and EMC
EMC standard (EMC)
| ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
---|---
Safety standard(LVD)| EN 62368-1:2020+A11:2020
Radio Equipment(RED)| ETSI EN 300 328 V2.2.2
Certification| CE,EMC,LVD,RED
Environment
Operation temperature| Ta: -30 OC ~ +55 OC
Case temperature (Max.)| Ta: +65OC
IP rating| IP20
Package
Size| L112x W112 x H50mm
Gross weight| 0.223kg
Mechanical Structures and Installations
Key function
- Short press the scene button to recall the corresponding scene, the blue indicator lights up.
- Before use the scene panel, please edit the scene setting through Tuya APP firstly.
PK4(WZS)
- Scene 1
- Scene 2
- Scene 3
- Scene 4
PK8(WZS)
- Scene 1
- Scene 2
- Scene 3
- Scene 4
- Scene 5
- Scene 6
- Scene 7
- Scene 8
APP Operating Instructions
Network pairing
- Download the Tuya APP and register an account, search and add the Tuya Zigbee gateway device.
- For PK4: Press and hold the “Scene 1” and “Scene 4” button until the 4 LED indicator light flashes.
- Under the gateway, you can find WZS-Scene Panel device in Tuya APP.
- After successful network pairing, the 4 LED indicator light will be on for 2 seconds and then off.
- For PK8: Press and hold the “Scene 1” and “Scene 8” button until the 8 LED indicator light flashes.
- Under the gateway, you can find WZS-Scene Panel device in Tuya APP.
- After successful network pairing, the 8 LED indicator light will be on for 2 seconds and then off.
- Under the gateway, search and add one or more ZBS-DIM, ZBS-CCT, ZBS-RGB, ZBS-RGBW, ZBS-RGB+CCT light devices.
- Scene panel unpairing: Delete the WZS-Scene Panel device from the tuya APP.
Remote association and scene settings
- There are 8 scenes in the Tuya APP, which can be set to lighting scenes or linkage scenes.
- Lighting scene is used for the overall control of multiple lamps, like the light adjustment of the entire room.
- Linkage scene is used for linkage control of different equipment, such lamps and curtains on and off together.
Example 1, set scene 1 for synchronous light control of the whole room:
- Select scene 1 and open the lighting scene settings.
- You can change the scene name, add one or more devices, adjust brightness and color, then save it.
- After successful setting, you can use the remote to control these lamps directly.
Example 2, set scene 2 to set up a scenario where different lamps or curtains are controlled together with different color or on/off state
- Select Scene 2 and open the linkage scene settings.
- You can change the scene name, add “one-click execution” tasks, select the devices that need to be linked, save the required functions, such as ON/OFF, mode, brightness and color temperature.
- After successful setup, you can use the remote to directly control all linked devices to the desired scene.
Note
- The scene1-8 in Tuya APP is correspond to the scene 1-8 button on the scene panel.
- You can select one scene button to set ALL OFF linkage scene function to turn off all lights.
- To delete the scene function, you can select “Reset” in the scene settings.
Guangzhou Skyacne Co.,Ltd
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>