nedis WIFIACMB1WT16 Wi-Fi Smart Air Conditioner User Guide

: June 12, 2024
: nedis

Table of Contents

nedis WIFIACMB1WT16 Wi-Fi Smart Air Conditioner
Product Information
Product Usage Instructions
Intended use
Specifications
Main parts
Control panel and remote control
Safety instructions
Installing the product
Using the control panel and remote control
Declaration of Conformity
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

nedis WIFIACMB1WT16 Wi-Fi Smart Air Conditioner

nedis-WIFIACMB1WT16-Wi-Fi-Smart-Air-Conditioner-
PRODUCT

Product Information

The Nedis WIFIACMB1WT16 is a local air conditioner used for cooling and dehumidifying rooms. It is exclusively intended for domestic, indoor use and is not intended for professional use. Theair conditioner can be used by children aged 8 years and above and
persons with reduced physical, sensory, or mental capabilities.

Specifications

Performance is influenced by factors like floor space, ceiling height, level of isolation, and number of windows.
Main Parts:
- Swing louvers
- Display
- Handle
- Exhaust nozzle
- Exhaust hose
- Window kit
- Window kit fasteners
- EVA-filter frame
- Control panel
- EVA-filter screen
- Continuous drainage outlet
- Air outlet
- CON-filter frame
- CON-filter screen
- Manual drainage outlet
- Power cable
- Exhaust hose connector
- Remote control
- Exhaust nozzle screw

Product Usage Instructions

Safety Instructions

Contains one or more (extremely/highly) flammable components.
Perform regular maintenance to reduce the risk of electric shock.

Installing the Product

Place the product on a stable and flat surface.
Only move the product in an upright position.
Leave a minimum of 0.5 m space around the air inlet and outlet to allow a good circulation of airflow.
If the product has been tilted, allow it to stand upright for 2 hours before plugging it in.
Only install, operate, and store the product in a room with a floor area above 7 m2.
Keep the product at a distance from flammable objects such as furniture, curtains, and similar.
Do not block ventilation openings and make sure that there is enough space around the product.

Assembling the Exhaust

Only use the provided exhaust hose.
Do not block the exhaust hose, as this may cause overheating.
Assemble the exhaust hose, exhaust nozzle, and exhaust hose connector as instructed.
Connect the exhaust hose connector to the air outlet.
Extend the exhaust hose up to 1500 mm, making sure not to twist or kink it.
Assemble the window kit with the fasteners.
Install the window kit in the window opening, ensuring it is placed horizontally or vertically as desired.
Tighten the fasteners and snap the exhaust nozzle into the window kit, securing it with the exhaust nozzle screw.

For more information see the extended manual online: ned.is/wifiacmb1wt16

Intended use

The Nedis WIFIACMB1WT16 is a local air conditioner used for cooling and dehumidifying rooms.
The product is exclusively intended as a local air conditioner for domestic, indoor use.
The product is not intended for professional use.
This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved. Children shall not play with the product. Cleaning and user maintenance shall not be done by children without supervision.
This product is intended for use in household environments for typical housekeeping functions that may also be used by non-expert users for typical housekeeping functions, such as: shops, offices other similar working environments, farm houses, by clients in hotels, motels and other residential type environments and/or in bed and breakfast type environments.
Any modification of the product may have consequences for safety, warranty and proper functioning.

Specifications

Product	Wi-Fi Smart Air Conditioner
Article number	WIFIACMB1WT16
Dimensions (l × w × h)	480 × 780 × 390 mm
Weight	33 kg
Input voltage	220 – 240 V ~ 50 Hz
Required power	1600 W
Energy class	A
Energy efficiency ratio (EER)	2.61
Noise level	< 65 dB
Cooling capacity	16000 BTU
Room size capacity *	140 m3
Air circulation	500 m3/h
Dehumidification	40 l/day
Refrigerant	R290 / 260 g
Power plug	Schuko CEE 7/7

The performance of the air conditioner is subjected to many factors like floor space, ceiling height, level of isolation and number of windows. The data mentioned is based on a space with low heat loads.

Main parts

nedis-WIFIACMB1WT16-Wi-Fi-Smart-Air-Conditioner-FIG
1

Swing louvers
Display
Handle
Exhaust nozzle
Exhaust hose
Window kit
Window kit fasteners
EVA-filter frame
Control panel
EVA-filter screen
Continuous drainage outlet
Air outlet
CON-filter frame
CON-filter screen
Manual drainage outlet
Power cable
Exhaust hose connector
Remote control
Exhaust nozzle screw

Control panel and remote control

nedis-WIFIACMB1WT16-Wi-Fi-Smart-Air-
Conditioner-FIG 2

Swing button
Timer button
Fan speed indicator
Fan speed button
Up button
Display
Down button
Mode indicators
Mode button
Sleep mode button
Power indicator / Full indicator
Power button
Wi-Fi indicator LED
Wi-Fi button
Temperature button

Safety instructions

WARNING

Contains one or more (extremely/highly) flammable components.
Contains one or more (extremely/highly) flammable components.

Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
Only use the product as described in this manual.
This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved. Children shall not play with the product. Cleaning and user maintenance shall not be done by children without supervision.
Close supervision is necessary when the product is used by or near children, animals or infirm persons. Do not allow children to play with it or touch it.
Keep the product out of reach from children.
Do not use a damaged or defective product, but return it for repair or replacement.
Do not expose the product to water, rain, moisture or high humidity.
If the product is immersed in water, do not touch the product or the water.
Shut off the main power grid and carefully remove the plug from the power outlet.
After the product has been immersed or covered in water or other liquids, do not use the product again.
Keep the product away from heat sources. Do not place the product on hot surfaces or near open flames.
Do not use the product near explosive or flammable materials.
Do not insert any objects into the product.
Do not obstruct or cover the product’s air inlet or outlet grid.
The appliance shall be installed in accordance with national wiring.
Always disconnect the product from the power outlet when cleaning or moving the product.
Do not pull the power cable to move the product.
Unplug the product from the power source and other equipment if problems occur.
Do not unplug the product by pulling on the cable. Always grasp the plug and pull.
Switch off the main power switch before unplugging the power cord.
Do not use the product when the cord or plug is damaged.
Make sure that the electrical supply in your area matches a voltage of 220 – 240 VAC and a frequency of 50 Hz.
Connect to a grounded socket only.
If necessary, use an earthed extension cable of a suitable diameter.
Fully extend the power cord and make sure the power cord does not contact the product.
When using an extension cord, use one which is as short as possible and fully extended.
Do not use external timers or remote control systems to switch the product on or off.
Ensure people do not trip over the cord.
Make sure that the power cable cannot become entangled and does not hang over the edge of a worktop.
Do not leave the product unattended when switched on.
R290 is a refrigerant gas that complies with the European directives on the environment.
Be aware that refrigerants can be odorless.
Place the product in an area without any continuous sources of ignition (for example: open flames, gas or electrical appliances in operation).
Only install, operate and store the product in a room with a floor area above 7 m2.
Only store the product in a well-ventilated area.
Store the product in such a way as to prevent mechanical failure.
When the product is installed, operated or stored in a non-ventilated area, make sure the room is designed to prevent the accumulation of refrigerant leaks resulting in a risk of fire or explosion due to ignition of the refrigerant caused by electric heaters, stoves, or other sources of ignition.
Only persons with a current valid certificate from an industry-accredited assessment authority, which authorizes their competence to handle refrigerants safely in accordance with an industry recognized assessment specification, can work on or break into a refrigerant circuit.
Servicing can only be performed as recommended by the equipment manufacturer. Maintenance and repair requiring the assistance of other skilled personnel can only be carried out under the supervision of the person competent in the use of flammable refrigerants.
When defrosting and cleaning the product, do not use any means other than those recommended by the manufacturing company.
Do not puncture or heat any part of the refrigerant circuit.
This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.

Installing the product

Place the product on a stable and flat surface.
Only move the product in an upright position.
Leave a minimum of 0.5 m space around the air inlet and outlet to allow a good circulation of airflow.
If the product has been tilted, allow it to stand upright for 2 hours before plugging it in.
Only install, operate and store the product in a room with a floor area above 7 m2.
Keep the product at a distance from flammable objects such as furniture, curtains and similar.
Do not block ventilation openings and make sure that there is enough space around the product.

Assembling the exhaust (image C)

Only use the provided exhaust hose.
Do not block the exhaust hose, this may cause overheating.
1. Assemble the exhaust hose A5, the exhaust nozzle A4 and the exhaust hose connector Ai.
2. Connect Ai to the air outlet Ae.
3. Extend A5 up to 1500 mm.
- Do not twist the exhaust hose.
- Ensure that the exhaust hose does not kink.
1. Assemble the window kit A6 with the fasteners A7.
2. Install A6 in the window opening.
- The window kit can be placed in horizontal and verticaldirection.
1. Tighten A7.
2. Snap A4 into A6 and fasten with the exhaust nozzle screw Ap.
- Place the product on a flat and dry surface.

Assembling the continuous drainage (optional)

Works only in dehumidifying and heating mode.
1. Open the continuous drainage outlet Aw.
2. Connect Aw to a water container or drainage system (not included).

Installing the Nedis SmartLife app

Download the Nedis SmartLife app for Android or iOS on your phone via Google Play or the Apple App Store.
Open the Nedis SmartLife app on your phone.
Create an account with your mobile phone number or your e-mail address and tap Continue.
You will receive a verification code on your mobile phone or e-mail address.
Enter the received verification code.
Create a password and tap Done.
Tap Add Home to create a SmartLife Home.
Set your location, choose the rooms you want to connect with and tap Done.

Adding the product to the SmartLife app (image D)

Switch on the product.
Tap + in the Nedis SmartLife app.
Select the device type you want to add from the list.
Confirm the Wi-Fi indicator LED Br is blinking fast, or hold the Wi-Fi button Bt for 5 seconds to reset the product.
Follow the instructions in the Nedis SmartLife app.
- Make sure you connect the product to a 2.4 GHz Wi-Fi network.
Rename the product after it has been found and added.
After confirming you can control the product with your smartphone.

To connect your SmartLife account to Amazon Alexa and/or Google Home, set it up using the “Smart Life” action or skill. For more details check the instruction on either Amazon or Google.

Using the control panel and remote control

(image B)

Button	Function
Swing button B 1	• Switch the oscillation on or off.

• Change the orientation of the louvers.

Timer button B 2| Press to set the timer. Use B 4 and

B 6 to set the duration of cooling.

Fan speed indicator B 3| Indicates the current fan speed.
Fan speed button B 4| Press repeatedly to select the fan speed.

(Not available in sleep and dehumidifying mode).

Up button B 5| Increase values.
Display B 6|
Down button B 7| Decrease values.
Mode indicators B 8| Indicates the current fan mode.
Mode button B 9| Repeatedly press the button to select the mode: Cooling mode / Dehumidifying mode / Fan mode.
Sleep mode button B q| Activate sleep mode. Only works in cooling mode. After one hour the set temperature increases 1 °C and again after 2 hours.
Power indicator / Full indicator B w| Indicates that the water reservoir in the product is full.
Power button B e| Switch the product on or off.
Wi-Fi indicator LED B r| Indicates if the product is connecting or connected with Wi-Fi.
Wi-Fi button B t| Press to connect the product to a Wi-Fi network.
Temperature button B y| Switch between Celsius and Fahrenheit.

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product WIFIACMB1WT16 from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is
not limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via: nedis.com/wifiacmb1wt16#support

ned.is/wifiacmb1wt16