nedis WIFIACMB3WT9 Wi-Fi Smart Air Conditioner User Guide

: June 12, 2024
: nedis

Table of Contents

nedis WIFIACMB3WT9 Wi-Fi Smart Air Conditioner
Product Information
Product Usage Instructions
Specifications
Intended use
Main parts
Display and remote control
Safety instructions
Installing the product
protection function
Declaration of Conformity
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

nedis WIFIACMB3WT9 Wi-Fi Smart Air Conditioner

nedis-WIFIACMB3WT9-Wi-Fi-Smart-Air-Conditioner-product

Product Information

The Wi-Fi Smart Air Conditioner is a versatile cooling device that comes with thermostat, app, and voice control features. It is available in two variants: WIFIACMB3WT9 and WIFIACMB3BK9. The product is designed to provide efficient cooling in residential and similar environments. It offers various specifications and features to ensure optimal performance and user convenience.

Specifications:

Product Article number: WIFIACMB3WT9 / WIFIACMB3BK9
Weight: [Weight]
Input voltage: [Input voltage]
Required power: [Required power]
Energy class: [Energy class]
Energy efficiency ratio (EER): [EER]
Noise level: [Noise level]
Cooling capacity: [Cooling capacity]
Room size capacity: [Room size capacity]
Room coverage*: [Room coverage]
Air circulation: [Air circulation]
Dehumidification: [Dehumidification]
Refrigerant: [Refrigerant]
Power plug: [Power plug]
Battery type: [Battery type]
Permissible excessive operating pressure: [Operating pressure]
Max. allowable pressure: [Max. allowable pressure]
Operation modes: [Operation modes]
Fan speed levels: [Fan speed levels]
Max. radio transmit power: [Radio transmit power]
Antenna gain: [Antenna gain]
Used frequency band: [Frequency band]
Modulation method: [Modulation method]

*The performance of the air conditioner may vary based on factors like floor space, ceiling height, level of isolation, and number of windows. The mentioned data is based on a space with low heat loads.

Product Usage Instructions

Intended Use:

The Wi-Fi Smart Air Conditioner is intended for use in residential environments, including homes, apartments, and other similar working environments. It is suitable for use in farmhouses,hotels, motels, bed and breakfast establishments, and other residential-type environments. However, it is not intended for professional use.

Main Parts:

Image A:

Control panel
Handle
Swing louvers
Exhaust nozzle
Exhaust hose
Window kit
Window kit fasteners
Power cable storage
Air outlet
Drainage outlet
Power cable
Exhaust hose connector
Remote control
Exhaust nozzle screw

Image B:

Display screen
Full indicator
WIFI indicator
Timer button
Speed button
Up button
Down button
Power button
Sleep button
Mode button

Safety Instructions:

Please read and follow the safety instructions provided below:

WARNING: This product may contain flammable components. Do not expose it to open flames or flammable gases.
Read the user manual and safety instructions before installing or using the product. Keep the packaging and documents for future reference.
Do not allow children, animals, or infirm persons near the product. Keep it out of their reach.
Ensure proper ventilation by adjusting the swing louvers for good airflow circulation.
Allow the product to stand upright for 2 hours if it has been tilted before plugging it in.
Keep the product away from flammable objects such as furniture and curtains.
Do not block ventilation openings and ensure there is enough space around the product.

Installing the Product:

To install the Wi-Fi Smart Air Conditioner, follow these steps:

Place the product on a stable and flat surface.
Only move the product in an upright position.
Leave a minimum of 0.5 m free space around the air outlet and swing louvers to allow a good circulation of airflow.
If the product has been tilted, allow it to stand upright for 2\ hours before plugging it in.
Keep the product at a distance from flammable objects such as furniture, curtains, and similar.
Do not block ventilation openings and make sure that there is enough space around the product.

For more detailed information and instructions, refer to the extended manual available online at: ned.is/wifiacmb3wt9 and ned.is/wifiacmb3bk9.

Specifications

Product	Wi-Fi Smart Air Conditioner
Article number	WIFIACMB3WT9 / WIFIACMB3BK9
Weight	22.0 kg
Input voltage	220 – 240 V ~ 50 Hz
Required power	1010 W
Energy class	A
Energy efficiency ratio (EER)	2.6
Noise level	≤ 65 dB(A)
Cooling capacity	9000 BTU
Room size capacity	18 – 27 m²
room coverage*	80 m3
Air circulation	350 m3 / h
Dehumidification	24 l/day
Refrigerant	R290 / 195 g
Power plug	Schuko CEE 7/7
Battery type	2 x AAA (not included)
Permissible excessive operating pressure	Suction 0.6 MPa

Discharge 1.8 MPa

Max. allowable pressure| 3.0 MPa
Operation modes| Cooling / Dehumidifying / Fan
Fan speed levels| high / low
Max. radio transmit power| 802.11b 16.5 dBm

802.11b 15.3 dBm

802.11b 15.9 dBm

Antenna gain| 2.5 dBi
Used frequency band| 2412 – 2472 MHz
Modulation method| DSSS, OFDM, 64QAM

The performance of the air conditioner is subjected to many factors like floor space, ceiling height, level of isolation and number of windows. The data mentioned is based on a space with low heat loads.

For more information see the extended manual online: ned.is/wifiacmb3wt9ned.is/wifiacmb3bk9

Intended use

The Nedis WIFIACMB3WT9 / WIFIACMB3BK9 is a mobile air conditioner used for cooling and dehumidifying rooms. The product is exclusively intended as a mobile air conditioner for domestic, indoor use. Any modification of the product may have consequences for safety, warranty and proper functioning. This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved. Children shall not play with the product. Cleaning and user maintenance shall not be done by children without supervision.
The product is intended for use in household environments for typical housekeeping functions that may also be used by non-expert users for typical housekeeping functions, such as: shops, offices other similar working environments, farm houses, by clients in
hotels, motels and other residential type environments and/or in bed and breakfast type environments. The product is not intended for professional use.

Main parts

nedis-WIFIACMB3WT9-Wi-Fi-Smart-Air-Conditioner-fig
1

Control panel
Handle
Swing louvers
Exhaust nozzle
Exhaust hose
Window kit
Window kit fasteners
Power cable storage
Air outlet
Drainage outlet
Power cable
Exhaust hose connector
Remote control
Exhaust nozzle screw

Display and remote control

nedis-WIFIACMB3WT9-Wi-Fi-Smart-Air-
Conditioner-fig 2

Display screen
Full indicator
WIFI indicator
Timer button
Speed button
Up button
Down button
Sleep button
Mode button
Power button

Safety instructions

Icon Description

Indication to explain that the product:

- Contains one or more (extremely/highly) flammable components.
contains one ore more pyrophoric components that catch fire spontaneously if explosed to air;
contains one or more pyrophoric components that is/are self-heating and may catch fire;
contains one or more pyrophoric components that release(s) flammable gases and may ignite spontaneously when in contact with water.

WARNING

Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
Only use the product as described in this document.
Install the product in accordance with national wiring.
Do not use a damaged or defective product, but return it for repair or replacement.
Close supervision is necessary when the product is used by or near children, animals or infirm persons. Do not allow children to play with it or touch it.
Only move the product in an upright position.
Keep the product out of reach from children.
Place the product on a stable and flat surface.
Leave a minimum of 0.5 m free space around the air outlet and swing louvers to allow a good circulation of airflow.
If the product has been tilted, allow it to stand upright for 2 hours before plugging it in.
Do not drop the product and avoid bumping.
This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
Do not expose the product to water or moisture.
If the product is immersed in water, do not touch the product or the water.
Shut off the main power grid and carefully remove the plug from the power outlet.
After the product has been immersed or covered in water or other liquids, do not use the product again.
Do not place the product in environments with high humidity, like a bathroom or laundry.
Keep the product away from heat sources. Do not place the product on hot surfaces or near open flames.
Do not use the product near explosive or flammable materials.
Do not insert any objects into the product.
Do not obstruct or cover ventilation openings.
Always disconnect the product from the power outlet when cleaning or moving the product.
Do not pull the power cable to move the product.
Unplug the product from the power source and other equipment if problems occur.
Switch off the main power switch before unplugging the power cord.
Do not use the product when the cord or plug is damaged.
Do not unplug the product by pulling on the cable. Always grasp the plug and pull.
Make sure that the electrical supply in your area matches a voltage of 220 – 240 VAC and a frequency of 50 Hz.
Connect to a grounded socket only.
If necessary, use an earthed extension cable of a suitable diameter.
Fully extend the power cord and make sure the power cord does not contact the product.
When using an extension cord, use one which is as short as possible and fully extended.
Do not use external timers or remote control systems to switch the product on or off.
Ensure people do not trip over the cord.
Do not leave the product unattended when switched on.
R290 is a refrigerant gas that complies with the European directives on the environment.
Be aware that refrigerants can be odorless.
Place the product in an area without any continuous sources of ignition (for example: open flames, gas or electrical appliances in operation).
Keep the product at a distance from flammable objects such as furniture, curtains and similar.
Only install, operate and store the product in a room with a floor area above 9 m2.
Only use the provided exhaust hose.
Do not block the exhaust hose. Blocking the exhaust hose may cause overheating.
Do not twist the exhaust hose.
Ensure that the exhaust hose does not kink.
Only store the product in a well-ventilated area.
When the product is installed, operated or stored in anon-ventilated area, make sure the room is designed to prevent the accumulation of refrigerant leaks resulting in a risk of fire or explosion due to ignition of the refrigerant caused by electric heaters, stoves, or other sources of ignition.
Only persons with a current valid certificate from an industry-accredited assessment authority, which authorizes their competence to handle refrigerants safely in accordance with an industry recognized assessment specification, can work on or break into a refrigerant circuit.
Servicing can only be performed as recommended by the equipment manufacturer. Maintenance and repair requiring the assistance of other skilled personnel can only be carried out under the supervision of the person competent in the use of flammable refrigerants.
When defrosting and cleaning the product, do not use any means other than those recommended by the manufacturing company.
Do not puncture or heat any part of the refrigerant circuit.

Installing the product

Place the product on a stable and flat surface.
Only move the product in an upright position.
Leave a minimum of 0.5 m free space around the air outlet and swing louvers to allow a good circulation of airflow.
If the product has been tilted, allow it to stand upright for 2 hours before plugging it in.
Keep the product at a distance from flammable objects such as furniture, curtains and similar.
Do not block ventilation openings and make sure that there is enough space around the product.
Only install, operate and store the product in a room with a floor area above 9 m2.
1. Plug the power cable Aw into the power outlet.

Assembling the exhaust (image C)

Only use the provided exhaust hose.
Do not block the exhaust hose. Blocking the exhaust hose may cause overheating.
1. Assemble the exhaust hose A5, the exhaust nozzle A4 and the exhaust hose connector Ae.
2. Slide Ae over the air outlet A9.
3. Extend A5 up to 1500 mm.
4. Do not twist the exhaust hose.
Ensure that the exhaust hose does not kink.
Assemble the window kit A6 with the window kit fasteners A7.
1. Install A6 in the window opening.
2. Tighten A7.
3. Snap A4 into A6 and fasten with the exhaust nozzle screw At.

Assembling the continuous drainage (optional)

Open the drainage outlet Aq.
Connect Aq to a water container or drainage system (not included).

Placing the batteries in the remote control

Slide the battery cover off the back of the remote control Ar
Insert 2 type AAA batteries.
Slide the battery cover back in place on Ar.

Installing the Nedis SmartLife app

Download the Nedis Smartlife app for Android or iOS on your phone via Google Play or the Apple App Store.
Open the Nedis Smartlife app on your phone.
Create an account with your mobile phone number or your e- mail address and tap Continue.
- You will receive a verification code on your mobile phone or e-mail address.
Enter the received verification code.
Create a password and tap Done.
Tap Add Home to create a SmartLife Home.
Set your location, choose the rooms you want to connect with and tap Done.

Adding a product to the Nedis SmartLife app

Switch on the product.
Tap + in the Nedis SmartLife app.
Select the device type you want to add from the list.
Confirm the Wi-FI indicator LED B3 is blinking fast.
- If B3 is not blinking fast, press the Speed button B5 on the product for 5 seconds during standby mode to reset the product.
Follow the instructions in the Nedis SmartLife app.
Rename the product after it has been found and added.
After confirming you can control the product with your smartphone.

To connect your SmartLife account to Amazon Alexa and/ or Google Home, set it up using the “Smart Life” action or skill. For more details check the instruction on either Amazon or Google.

Using the control panel and remote control

Button	Function
Timer button B 4	Press to set the timer. Use B 6 and

B 7 to set the duration of cooling.

Speed button B 5| Press the speed button during COOL or FAN mode to switch between high and low fan speed operation.

In DRY mode, it is not possible to switch between fan speed operation.

Up button B 6| Increase values.
Down button B 7| Decrease values.
Sleep button B 8| Activate sleep mode. Only works in COOL mode. After one hour the set temperature increases 1 °C and again after 2 hours.
Mode button B 9| Repeatedly press the mode button the select the mode: FAN / DRY (dehumidifying) / COOL.
Power button B q| Switch the product on or off.

protection function

Frost protection function
The product automatically enters the frost protection status if the temperature of the exhaust pipe is too low (only works in COOL and DRY mode).
The product automatically reverts to the normal operation if the temperature of the exhaust pipe rises to a certain temperature.

Protection function of the compressor
To increase the lifetime of the compressor, it has a 3 minute delay booting protection function after the compressor is switched off.

The overflow protection function
If water exceeds the warning level, the product emits a tone, and the ‘water full’ indicator starts flashing.
(See next paragraphs how to empty the water reservoir of the product.)

Manual drainage
The FULL indicator B2 flashes and the product emits an alarm sound to indicate that the water reservoir is full.

Switch off the product using Bq.
Unplug Aw.
Place a water container underneath Aq.
Remove the water plug of Aq.
Slightly tilt the product backwards to ensure all water leaves the reservoir.
Put the water plug back on Aq.

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product WIFIACMB3WT9 / WIFIACMB3BK9 from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via:
nedis.com/WIFIACMB3WT9#support
nedis.com/WIFIACMB3BK9#support

ned.is/wifiacmb3wt9
ned.is/wifiacmb3bk9