VISUAL COMFORT CHA 8666 Weller Zig-Zag Table Lamp Instruction Manual

VISUAL COMFORT CHA 8666 Weller Zig-Zag Table Lamp

Product Information

• Product Name: Weller Zig-Zag Table Lamp
• Item Number: CHA 8666
• Manufacturer: Not specified

Product Usage Instructions

1. Carefully remove all parts from the box and place them on a clean, soft surface.
2. Install the harp (part C) by squeezing it together and inserting it into the top of the saddle (part D).
3. Remove the finial (part A) from the harp (part C).
4. Remove the shade (part B) from its packaging and install it to the harp (part C) using the finial (part A). If the shade has additional packaging inside, carefully cut it off to avoid damages.
5. Install a light bulb into the socket.
6. Remove the protective cover (part E) from the plug.
7. Plug the lamp into an electrical outlet and test the fixture.

Care Instructions:
Clean the lamp only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.

Note:
This light fixture should be installed in accordance with all applicable local installation codes and by a person familiar with its construction and operation, as well as the hazards involved. Inspect the item and its contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.

• Tools Required (Not Included): Scissors
• Product Certification: Listed for use in the United States (UL Listed)

Weller Zig-Zag Table Lamp

• Item # CHA 8666

NOTICE:
This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.

TOOLS REQUIRED (NOT INCLUDED):

• Scissors

ASSEMBLY INSTRUCTIONS

1. Carefully remove all parts from the box. Place on a clean, soft surface.

2. Install harp (C) by squeezing together and inserting into the top of saddle (D).

3. Remove finial (A) from harp (C).

4. Remove shade (B) from packaging and install to harp (C) using finial (A).
   NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages.

5. Install light bulb into the socket.

6. Remove protective cover (E) from plug.

7. Plug into electrical outlet and test the fixture.

Care Instructions

Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>