iOttie Easy One Touch 6 Vehicle Screen Mount User Manual

iOttie Easy One Touch 6 Vehicle Screen Mount

Product Information

The Easy One Touch 6 Vehicle Screen Mount is a universal mount designed to fit all smartphone and case combinations. It features an easy one-touch lock and release mechanism for quick and secure mounting of your device. The mount has a rotating ball joint, adjustable swivel arm, and locking side arms for optimal positioning and stability.

Product Specifications

Product Usage Instructions

Attaching the Mount

1. Connect the mount cradle to the ball joint, then tighten the cradle knob.
2. Peel off the film on the base of the mount and press evenly onto a clean vehicle screen for 30 seconds.
3. Adjust the swivel arm by loosening the twist knob and moving the arm into the desired position before retightening.
4. To ensure a secure hold, wait at least 20 minutes before attaching your phone.

Note: The adhesive base is detachable from the mount arm and features one-time use, semi-permanent tape. If the mount is removed, it cannot be re- mounted. An extra adhesive base is included for your convenience. When removing the mount, use caution and follow the recommended steps to avoid damage.

Adjusting the Mount

To rotate the cradle, loosen the cradle knob. Tighten to lock it into the desired position. To adjust the bottom foot, pull it down or push it up. There are 5 total height settings available.

Easy One Touch Mechanism

The Easy One Touch lock and release mechanism allows you to mount and retrieve your smartphone quickly and easily.

Mounting:

1. Squeeze the release bars.
2. Press your device against the Easy One Touch trigger button. The mount’s arms will automatically close on contact.

Releasing:

Squeeze the release bars again to release your device.
Please refer to the respective sections in the user manual for instructions in French, Italian, German, and Spanish.

Index

For optimal mounting, please follow the detailed instructions within this manual when using the Easy One Touch 6. iOttie is not liable for damages due to product misuse.

Product Information

At a Glance

Product Specifications

Installation

Attaching the Mount

1. Connect the mount cradle to the ball joint, then tighten the cradle knob.
2. Peel off the film on the base of the mount and press evenly onto the clean vehicle screen for 30 seconds.
3. Adjust the swivel arm by loosening the twist knob and moving the arm into the desired position before retightening.
4. To ensure a secure hold, wait at least 20 minutes before attaching your phone.

Note

• The adhesive base is detachable from the mount arm and features one-time use, semi-permanent tape. If the mount is removed, it cannot be re-mounted. For this reason, an extra adhesive base is included for your convenience.
• When mounting, it is recommended that the surface and product be above 40°F.
• When removing the monitor mount, please use caution. We recommend first removing the swivel arm from the adhesive base and then slowly removing the base from the edge to avoid damage.
• If you have trouble removing the base, we recommend using a putty knife, library card, or credit card (with caution).

Adjusting the Mount

Cradle Knob

• To rotate the cradle, loosen the cradle knob. Tighten to lock into the desired position.

Bottom Foot

• To adjust the bottom foot, pull it down or push it up. There are 5 total height settings.

Easy One Touch Mechanism

• The Easy One Touch lock and release mechanism makes it simple to mount and retrieve your smartphone in seconds.

[ Mounting ]

1. Squeeze the release bars.
2. Press your device against the Easy One Touch trigger button.
   • The mount’s arms will automatically close on contact.

[ Releasing ]

• Squeeze the release bars again to release your device.
• The Easy One Touch 6 Vehicle Screen Mount is backed by a 2-year warranty.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>