VISUAL COMFORT TOB3023 Large Terri Round Table Lamp Instruction Manual

VISUAL COMFORT TOB3023 Large Terri Round Table Lamp

Product Information

The Large Terri Round Table Lamp (Item # TOB3023) is a stylish and functional light fixture that adds a touch of elegance to any room. Please read and follow the assembly instructions carefully to ensure proper installation and usage. This product is listed and approved for use in the United States.

Important Notice

This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with its construction and operation, as well as the hazards involved. Before installation, inspect the item and its contents carefully. If any damage or defect is found, do not proceed with the installation. Retain all packaging material until the installation is complete and approved.

Tools Required (Not Included)

Scissors

Product Usage Instructions

1. 1. Carefully remove all parts from the box and place them on a clean, soft surface.

2. Install a light bulb into the socket of the lamp.
3. Remove shade (A) from its packaging and clip it onto the light bulb.

Note: If the shade has additional packaging, carefully cut it off from the interior of the shade to avoid damages.

1. Remove the protective cover (B) from the plug.
2. Plug the lamp into an electrical outlet.
3. Test the fixture to ensure it is working properly.

Care Instructions

To clean the lamp, use only a soft dry cloth or feather duster. Do not use abrasive or chemical agents as they may damage the lamp’s surface.

This product is listed and approved for use in the United States.

ASSEMBLY INSTRUCTIONS

ALB Version

Large Terri Round Table Lamp
Item # TOB3023

NOTICE:
This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.

TOOLS REQUIRED (NOT INCLUDED): Scissors

1. Carefully remove all parts from the box. Place on a clean, soft surface.

2. Install light bulb into the socket.

3. Remove shade (A) from packaging and clip onto light bulb.
   NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages.

4. Remove protective cover (B) from plug.

5. Plug into electrical outlet and test the fixture.

Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.

CG Version

TOOLS REQUIRED (NOT INCLUDED): Scissors

1. Carefully remove all parts from the box. Place on a clean, soft surface.

2. Install light bulb into the socket.

3. Remove shade (A) from packaging and clip onto light bulb.
   NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages.

4. Remove protective cover (B) from plug.

5. Plug into electrical outlet and test the fixture.

Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>