SW-MOTECH GPT.06.851.60000/B URBAN ABS Topcase System Instruction Manual
- June 12, 2024
- SW-MOTECH
Table of Contents
SW-MOTECH GPT.06.851.60000/B URBAN ABS To paces System
Product Information
Product Name: ANBAUANLEITUNG
Model Numbers: GPT.06.851.60000/B, GPT.06.851.16000/B, BC.HTA.00.677.20000/B
Product Usage Instructions
- Ensure that you have all the necessary tools and equipment before starting the installation process.
- Identify the appropriate model number for your specific application.
- Carefully read and understand the installation instructions provided in this manual.
- Prepare the installation area by clearing any debris or obstructions.
- Position the product in the desired location and ensure it is level and secure.
- Follow the step-by-step installation procedure outlined in the manual, including any specific guidelines or warnings.
- Use the provided hardware and fittings to securely attach the product to the intended surface.
- Double-check all connections and fastenings to ensure proper installation.
- Test the product functionality according to the user manual and verify that it is working correctly.
- If any issues or concerns arise during installation or operation, refer to the troubleshooting section of the manual or contact our customer support for assistance.
For detailed installation instructions and safety precautions, please refer to the complete user manual provided with your product.
MOUNTING INSTRUCTIONS
Revision: 00 – Datum / Date: 06 – 2021
STREET-RACK
Thank you for choosing this premium product from SW-MOTECH. Please visit our
web shop for additional information, such as application charts and PDF
mounting instructions. Any other documents that may be required (e.g. ABE
certifications), are also available for download at our web shop.
Installation and/or maintenance of this product require good technical
understanding! For your own safety SW-MOTECH recommends having installation
and/or servicing carried out by a specialist workshop! SW-MOTECH assumes no
liability for damage caused by improper installation and/or maintenance work!
Carefully follow all the directions given in the mounting instructions and pay
attention to all relevant information in the vehicle manual during assembly.
Nonconformance can lead to vehicle damage or even endanger the driver! These
mounting instructions are written based on our current state of knowledge.
Legal requirements for accuracy do not exist.
This product was developed for vehicles in their factory setting.
Compatibility with original accessory parts or other manufacturers’ accessory
parts is not guaranteed. Furthermore, BEFORE installing this product, make
sure that all moving parts (e.g. the chain) are in the original state of
maintenance. Installed accessories can change the driving behavior and/or
stability of your vehicle.
GENERAL INFORMATION
Observe the country-specific regulations concerning vehicle registration/
operation as well as TUV regulations if applicable. If required, register
installed parts in the vehicle documents through an appropriate inspection
authority.
-
PREPARATION : Read the mounting instructions carefully and make sure that all items of the parts list are included. Make sure that your vehicle is parked safely and cannot fall over. Turn off the engine and remove the ignition key. Let the motor/exhaust cool off if necessary. Disconnect the vehicle battery when working on the electrical system. Use appropriate tools. Have another person to help you.
-
MOUNTING : All parts and connections removed from the vehicle must be reinstalled in accordance with the vehicle manufacturers· specifications or replaced by parts delivered by SW-MOTECH. Secure all threads, unless otherwise specified, with medium-strength liquid thread locker.
Torque specifications undefined by SW-MOTE CH must be obtained from the vehicle manufacturer or by a specialist workshop! -
FUNCTION CHECK : After installation make sure that all parts and connections previously removed are properly replaced. Also make sure that no moving parts are obstructed and no function of the vehicle is hindered in any way. Cables and hoses must not rub and/or be pinched. Before starting to ride, perform a comprehensive check of all functions. After the first 50 km and then at regular intervals, check the tightening torque of all screw connections and the proper fit of the product.
PRODUCT SPECIFIC INFORMATION
ATTENTION : The indicated maximum load is inclusive the weight of case/luggage and adapter plate! The maximum vehicle load specified by the manufacturer must not be exceeded!
PARTS LIST
step SR.NO ITEM.NO Part
QUANTIY
2 1 GPT.06.851.901.01 /902.01 left
2/2
2 M8 x 40;DIN6912 short head; black 4/4
3 Ill 8,4; DIN 125 Washer; black 4/4
4 0 20 / Ill 8,4 / h 13 Spacer; height 13 mm 2/2
5 0 20 / Ill 8,4 / h 14 Spacer; height 14 mm 2/2
6 KES.RD.210.0300.02.GL Plastic Plug 2/2
3 7 GPT.00.649.050 Luggage Rack 1 /1 1/1
8 MS x 25; DIN 7991 Countersunk Screw; black 4 /4 20 4/4
9 8,4 Countersunk Washer; black 4/4
MOUNTING
MOUNTING
URBAN ABS top case
Thank you for choosing this premium product from SW-MOTECH. Please visit
our web shop for additional information, such as application charts and PDF
mounting instructions. Any other documents that may be required (e.g. ABE
certifications), are also available for download at our web shop.
Installation and/or maintenance of this product require good technical
understanding! For your own safety SW-MOTECH recommends having installation
and/or servicing carried out by a specialist workshop! SW-MOTECH assumes no
liability for damage caused by improper installation and/or maintenance work!
Carefully follow all the directions given in the mounting instructions and pay
attention to all relevant information in the vehicle manual during assembly.
Nonconformance can lead to vehicle damage or even endanger the driver! These
mounting instructions are written based on our current state of knowledge.
Legal requirements for accuracy do not exist.
This product was developed for vehicles in their factory setting.
Compatibility with original accessory parts or other manufacturers” accessory
parts is not guaranteed. Furthermore, BEFORE installing this product, make
sure that all moving parts (e.g. the chain) are in the original state of
maintenance. Installed accessories can change the driving behavior and/or
stability of your vehicle.
GENERAL INFORMATION
Observe the country-specific regulations concerning vehicle registration /
operation as well as TUY regulations if applicable. If required, register
installed parts in the vehicle documents through an appropriate inspection
authority.
- PREPARATION : Read the mounting instructions carefully and make sure that all items of the parts list are included. Make sure that your vehicle is parked safely and cannot fall over. Turn off the engine and remove the ignition key. Let the motor / exhaust cool off if necessary. Disconnect the vehicle battery when working on the electrical system. Use appropriate tools. Have another person to help you.
- FUNCTION CHECK : This is a universal product. For this reason make sure BEFORE the first use, that the product can be fixed properly and used without problems with your vehicle type. After fixation also make sure that no moving parts are obstructed and the function of the vehicle is not hindered in any way. Lamps as taillight and turn signals must not be limited in their function. Cables and hoses must not rub and/or be pinched. Before starting to ride, perform a comprehensive check of all functions.
PRODUCT SPECIFIC INFORMATION
- ATTENTION : Riding with this product may affect the motorcycles driving and braking performance!
- ATTENTION : Before riding and at each stop (every 200 km) check proper fixation of the product!
ATTENTION : The maximum load of the used SW-MOTECH STREET-RACK / ADVENTURE-RACK must not be exceeded (refer mounting instructions of the rack)! The maximum vehicle load specified by the manufacturer must not be exceeded!
Step
| Nr.
No.
| Item No./ Description *| Part|
Quantity
| N-m”‘
---|---|---|---|---|---
| | | Both variants| |
111| | URBAN ABS top case| 1 /1|
12)| BC.ZUB.00.105.30000| Waterproof inner bag| 1 /1|
13)| BC.LOC.00.001.10200/B| Lock for motorcycle luggage| 1 /1|
| | | |
| | BC.HTA.00.677.21000| URBAN ABS top case
for STREET-RACK| |
.14| )| BC.HTA.00.677.500.01| Locking System| 1 /1|
15)| M5 x 12; ISO 7380| Screws; black| 6 /6| 2,5
16)| 0 5,3; DIN 9021| Washer; stainless steel| 6 /6|
171| M5; DIN 985| Lock Nut; stainless steel| 6 /6|
101| HTA.00.864.500.07| Anti-Theft Device| 1 /1|
19)| 4,5 X 16| Lenshead Screw, self-tapping| 4 /4| 2,5
| | | |
| | BC.HTA.00.677.22000| URBAN ABS top case as lashing variation| |
.14| )| BC.HTA.00.677.900.01| Foam Rubber Base| 1 /1|
15)| M5 x 12; ISO 7380| Lenshead Screws; black| 6 /8| 2,5
16)| 0 5,3; DIN 9021| Washer; stainless steel| 6 /6|
111| HTA.00.864.012| Cover Plate| 1 /1|
18)| M5 x 12; ISO 7380| Lenshead Screws; black| 2 /8| 2,5
19)| 011/06/h4| Spacer; plastic| 2 /2|
110)| KEK.OO.M8.ISK| Plastic Cap; black| 2 /2|
1111| BC.ZUB.00.097.30000| Loop Strap Set [4 pieces)| 1 /1|
112)| BC.ZUB.00.004.30000| Lashing Eye Set 12 pieces)| 1 11|
URBAN ABS top case as lashing variation
- Step [1]: Open the lid and inner zipper of the top case 111.
- Step [2]: Flip up the inner lining.
- Step [3]: Attach the foam rubber base 14) under the top case 11]. Tighten the screws as specified in the parts list.
- Step [4]: Flip down the inner lining.
- Step [5]: Close the inner zipper of the top case 1 .
- Step [6]: Turn the locking button of the anti-theft device 8] to the closed position.
- Step [7]: Attach the anti-theft device (8) inside the top case (1). Tighten the screws as specified in the parts list.
MOUNTING TO THE
STREET-RACK
- Step [8]: Turn the locking button into the open position.
- Step [9]: Push the locking lever into the open position.
- Step [10]: Slide the locking system (4) with the two hooks into the openings of your STREET-RACK (sold separately).
- Step [11]: Press the top case (1) slightly down ..
- Step [12]: … and close the locking lever. Pay attention to the audible snap sound.
- Step [13]: Secure the top case via locking button of the anti-theft device (8) against theft and check the proper fit on the vehicle. TIP: We recommend leaving the locking button of the anti-theft device (8] in the closed position during the ride.
URBAN ABS top case as lashing variation
- Step [1]: Open the lid and inner zipper of the top case (1).
- Step [2] : Flip up the inner lining.
- Step [3]: Attach the foam rubber base (4) under the top case (1). Tighten the screws as specified in the parts list.
- Step [4]: Flip down the inner lining.
- Step [5]: Close the inner zipper of the top case (1)
- Step [6]: A ttach the cover plate (7) inside the top case (1). Tighten the screws as specified in the parts list.
FIXATION TO THE VEHICLE
Step [7]: On both sides entangle TWO loop straps (11] to appropriate and
reliable attachment points in the rear area of the vehicle le.g. luggage hook
etc.). Then entangle on both sides TWO loop straps (11) to appropriate and
reliable attachment points of the vehicle (e.g. vehicles frame, footrest
mounts etc.)
FUNCTION CHECK (MUST BE OBSERVED)
- ATTENTION: All loop straps must not contact any hot or moving parts of the vehicle. All loop straps should also remain 15 cm away from hot parts of the vehicle and remain clear of the exhaust stream. For this reason compress the suspension fully several times with your vehicle stationary.
- Step [8]: Attach the hook buckles of the loop straps [11 I on both sides to the marked loops of the top case [1 I. as shown in the drawing. Tighten all loop straps until the top case [1) is centered and securely fastened to the vehicle.
- Step [9]: Secure the overlength of the loop straps [6) with the rubber loops against flapping.
- Step [10]: Check the proper fit of the top case.
MOISTURE PROTECTION
Use the included waterproof inner bag [2) to protect your luggage from
moisture.
LOADING
- ATTENTION: Never store pointy or sharp-edged objects, which could cause injury to persons or damage to the vehicle/top case.
Volume expansion: Open the revolving zipper. For a tight fit the opening angle can be adjusted via the attached straps.
CARE
For cleaning use ONLY a soft textile brush, cloth or sponge and warm soapy
water! Rinse with clean water.
Do NOT use strong cleaning agents, rough cleaning tools or high pressure
washer!
Clean the top case after riding in salty conditions, to avoid damage from
salt.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>