CREST 116606 CleanGrip Plastic Anti-Ligature Tethers Instruction Manual
- June 12, 2024
- CREST
Table of Contents
CREST 116606 CleanGrip Plastic Anti-Ligature Tethers
Product Information: CleanGrip Plastic Anti-Ligature Tether Screw/Nut
Assembly
The CleanGrip Plastic Anti-Ligature Tether Screw/Nut Assembly is a versatile product designed for secure installation of tethers in various settings. It is commonly used in healthcare facilities, correctional institutions, and other environments where anti-ligature measures are necessary.
P/N: 116606, 116607, 116608, 116609, 116613
Features & Benefits:
- Plastic construction: The tether assembly is made of durable plastic material, ensuring long-lasting performance and resistance to corrosion.
- Anti-ligature design: The assembly is specifically designed to prevent ligature risks, providing a safer environment for users.
- Easy installation: The screw/nut assembly is straightforward to install and can be securely attached to various surfaces.
Typical Installation:
- Identify the desired location for tether installation. Ensure it is a suitable surface that can securely hold the assembly.
- Using appropriate tools, create pilot holes or drill the necessary mounting holes in the chosen surface.
- Insert the screw through the hole in the tether and align it with the mounting hole.
- Place the nut onto the screw and tighten it securely using a suitable tool.
- Verify the stability and strength of the installed tether assembly before use.
If you require any assistance or have further questions, please contact Crest Technical Support at 1-800-328-8908. For additional technical documents, visit CrestHealthcare.com.
Specifications: Subject to change without notice
Date of Manual Revision: 02/10/2022
Manual Revision: C
CleanGrip Plastic Anti-Ligature Tether Screw/Nut Assembly
Installation P/N: 116606,116607, 116608, 116609, 116613
CleanGrip™ Plastic Anti-Ligature Tethers
Features & Benefits
Safe and easy to grab, the Crest CleanGrip is a highly visible and cleanable
alternative to nylon station pullcords. The CleanGrip tether is constructed of
12 mm wide PVC that is 1.8 mm thick. It is easily disinfected by germicidal
detergent, disposable wipes or disinfectant cleaner. The anti-ligature safety
feature is created with strategic placement of “breaks” every 4″ along the
length of the cord when 22 lbs of force is exerted. CleanGrip is available in
preassembled configurations, as well as bulk rolls.
- Bulk tether can be cut to any desired length
- Available in red or blue to provide contrast for high visibility
Typical Installation
- Trim the CleanGrip tether, if needed, in a straight line
- Using a 3/32″ drill bit, drill a hole centered 1/4″ from the end of the CleanGrip tether
- Insert provided screw through the security clip and CleanGrip hole, as shown
- With black sleeve facing downward, secure the nut to the screw
Crest Technical Support: 1-800-328-8908
Specifications subject to change without notice.
Visit CrestHealthcare.com for additional technical documents.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>