crest CS1F TV Safety Strap Installation Guide

: June 6, 2024
: CREST

Table of Contents

SAFETY FIRST
TOOLS REQUIRED
HARDWARE KIT CONTENTS
STEP 1 – SELECT THE CORRECT SCREW SIZE FOR ATTACHING THE STRAP TO THE
STEP 2 – POSITIONING YOUR FLAT PANEL TO THE DESIRED POSITION
STEP 3 – SECURE STRAP TO FLAT PANEL TV
TECHNICAL SUPPORT
1 YEAR WARRANTY
Documents / Resources

CS1F TV Safety Strap
Installation Guide

SAFETY FIRST

Some images in this guide may vary slightly from the actual components supplied.
Ensure this Installation Guide is completely read and understood before attempting installation.
Strap MUST NOT be installed solely in plasterboard, fiber cement, and similar surfaces.
Strap MUST be installed in sound supporting structures such as those made of timber, steel, or masonry using appropriate fasteners.
The supporting structure must be capable of sustaining the combined weight of the TV mount and the strap otherwise the structure must be reinforced.
The fasteners supplied in this hardware pack allow for fixing into timber and masonry only. If installing into a supporting structure made of steel, appropriate fasteners must be used and sourced from an appropriate supplier.
Use appropriate tools and safety equipment and ensure adequate ventilation during installation.
If uncertain about any aspect of installation, contact Crest or an installation professional.
Crest holds no responsibility for incorrectly installed products.

Thank you for purchasing this Crest TV Wall Mount.
Crest prides itself on supplying quality audio-visual accessories to consumers and businesses throughout Australia.
If you follow this guide carefully, we are confident this product will help maximize the enjoyment you obtain from your audio-visual equipment for many years. Please keep this guide for future reference.

This model will suit most flat panel TV’s as long as they weigh 60kg Maximum

TOOLS REQUIRED

Drywall (Timber Frame) Installation

Stud finder
Spirit level
Pencil
Drill
Long neck Philips head screwdriver
2mm Diameter high-speed drill bit
Adjustable spanner

In addition, for Masonry Installation

Drill with hammer function
6mm Masonry drill bit
Hammer

If installing on to glass, you will require

Long neck Philips head screwdriver

HARDWARE KIT CONTENTS

ITEM DESCRIPTION

crest CS1F TV Safety Strap - figure 1 |
---|---

crest CS1F TV Safety Strap - figure 3

STEP 1 – SELECT THE CORRECT SCREW SIZE FOR ATTACHING THE STRAP TO THE

BACK OF YOUR TV

The Hardware Pack contains 4 different sized bolts (#5 to 11) for attaching the strap to your TV.
Hand thread these bolts into the HIGHER threaded holes in the back of your TV so you can determine the correct size.
If none of these bolts fit you will need to purchase the correct ones from your local hardware, Crest only supply’s the most popular sized bolts.

STEP 2 – POSITIONING YOUR FLAT PANEL TO THE DESIRED POSITION

Before attaching the strap to your TV and Furniture please ensure that your TV is sitting in the correct position.
If you have decided to attach the strap to your wooden shelf, mark and drill two 2mm (wide), holes in the appropriate position then attach using wood screws #2…DO NOT over-tighten screws.
For attaching to a wall, mark desired position. When attaching to a cavity wall ensure that the connector is screwed into the STUD (use stud finder to find location) then pre-drill holes using a 2mm bit followed by screw #3. If going into a Masonry wall pre-drill holes with a 6mm Masonry Drill Bit then lightly tap Concrete Anchor #4 into these holes. Once this is done you can then use screw #3 to attach the connector. DO NOT over-tighten screws.

crest CS1F TV Safety Strap - figure 4 |
---|---

STEP 3 – SECURE STRAP TO FLAT PANEL TV

It is now time to secure your strap to the TV using the bolts you previously selected; a washer either #12 or 13 can be used if required. It is important here to NOT over tighten these bolts but make sure they are securely attached.
Tighten the Strap between your TV and Furniture by adjusting the buckle on the strap. It is important here to make sure that the strap is tight and that your TV base is held flat to the furniture top.
After this is completed it is important to test your TV against accidental knocks to ensure that your TV is in the correct position and that it is held stable.

TECHNICAL SUPPORT

If you have any questions regarding the warranty, installation or use of this product, please contact our Technical Support Centre on 1800 812 261.

1 YEAR WARRANTY

Olbertz Holdings Pty Ltd ACN 010 003 933 trading as Crest Electronics (Crest Electronics) of 165 South Pine Road, Brendale, Queensland, 4500, Ph: 1800 812261, Email www.crest.com.au, warrants that if this Crest product purchased by you from Crest or a retail outlet is found by Crest to be defective in workmanship or materials within 1 year of the date of purchase, Crest Electronics will (at its election) either repair that product, replace the product, supply an equivalent product or pay the costs of repairing or replacing the product or acquiring an equivalent product.
This limited warranty will not extend to or cover any expenses associated with removing, demounting the original product or installing the repaired, replaced or equivalent product or all or any of its components, you must bear these expenses. It also does not cover damage or loss resulting from intentional or unintentional misuse of, tampering with, alterations to or incorrect installation of this product or use of this product for purposes other than that for which it is designed or in a manner inconsistent with the product’s instructions. This limited warranty also does not apply to damage or loss resulting from fair wear and tear or events beyond Crest Electronics’ control including but not limited to natural disasters.
In order to claim under this warranty, you must contact Crest Electronics and return to Crest Electronics (via our nominated reply paid address) the product and its components and proof of purchase (including the date and location of purchase) so that Crest can verify the defect and your purchase. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The benefits given by this warranty are in addition to other rights and remedies that you may have under a law in relation to the goods or services to which the warranty relates.

Proudly brought to you by:

PO Box 5658 Brendale
QLD Australia 4500
Customer Support
1800 812 261
www.crest.com.au
AUSTRALIAN OWNED