CREST JOLTFB2 JOLT ACTIVITY TRACKER SMARTWATCH User Guide
- June 5, 2024
- CREST
Table of Contents
JOLT ACTIVITY TRACKER
USER GUIDE
JOLTFB2
Included in pack
1x Smart Watch
1x Instruction Manual
Device Application/ Install the Application
Scan the below QR codes to find the matching Applications via Google ® Play
Store or Apple ® Play store and search for “fitpro”.
Minimum system requirements for watch device and App device to work: Android
5.0 or newer – Apple iOS9.0 or newer.
|
---|---
https://play.google.com/store/apps/details?id=cn.xiaofengkj.fitpro|
https://apps.apple.com/au/app/fitpro/id1455617149
Profile Set Up
It is advised to fully set up a user account profile within the App for
accurate results. The App will ask for device permissions once installed. We
encourage the user to allow all otifications and pairing access to their
connected smart device for better functionality. The device will continue to
work, but with limited visibility and functionality.
Device Pairing
Model: JOLTFB2
PLEASE NOTE: Your device may be in a low battery mode when you first receive
it. We recommend charging before the initial set up of the device, as this
will wake up the device from its low battery mode once fully charged. This may
take 2 full charging cycles
Ensure the BT is enabled on your mobile phone.
Enter the App and select the “Set” icon menu from the bottom menu bar. Select
the “Bind Devices” banner. Select Model: JOLTFB2 or LT716 and this will
automatically pair. To remove the device pairing, select the “Remove” icon in
the “Set Menu” and select confirm. This will delete all data and remove device
pairing.
To view the device details, tap through the device menu screen and press and
hold at the “More” icon. Again, tap through the menu until the model’s name
and power-off logo appear.
This Device will update the following: Date, time, and calendar details to
match to the connected App and smart device.
Device Pairing & Trouble Shooting Guide:
Pairing the Device: If pairing devices through the App is unsuccessful try the
below actions.
- Ensure no other BT devices are causing any interference
- Turn off and then on the Smart devices BT connection
- Restart both devices
- Uninstall the App and reinstall
Unpairing the device
To remove the device pairing, select the “Remove” Icon in the “Set Menu” and
select confirm. This will delete all data and remove the device pairing.
To completely disconnect the device from a connected smart device, enter the
BT settings on the smart device, find JOLTFB2 or LT716 and select “Forget this
Device”.
Main App Features and Setting
It is advised to fully set up a user account profile within the App for
accurate results.
How to Wear
It is best to wear the band beside the Ulnar Styloid (wrist bone). Adjust the
size using the adjustment holes for a comfortable fit. The sensor should be
close to the skin, voiding movement.
Device Charging
Ensure the battery is fully charged before initial use. A low battery will
cause the device to shut down and will need to be placed on charge until it
powers back on automatically. A fully charged device has an extended battery
life of up to 10 days (standby time). The battery life and charge cycles will
vary based on usage and device settings.
We recommend using a USB-A port with a rating of 5Volts @ 1Amp for
optimal charging performance.
How to Charge
Remove the top Silicone band from the watch by pulling the band away from the
watch face. With the strap removed, a USB-A dongle will be visible. Place the
exposed dongle into a USB-A port to charge. If positioned correctly the device
will vibrate, if it does not vibrate or does not indicate it is charging,
remove and re-insert facing the opposite direction.
When charging, a battery icon will appear on the screen to indicate the
device is charging. A full charge can take up to 3 hours.
PLEASE NOTE: Your device may be in a low battery mode when you first
receive it. We recommend charging before the initial set up of the device, as
this will wake up the device from its low battery mode once fully charged.
This may take 2 full charging cycles
How to Use
Basic Operations:
-
Power On
Press and hold the front button for 4 seconds, the watch will turn on and re- connect to the last smart device it was paired to. If the device fails to power on, it could be due to nsufficient power and will need to be charged. -
Power Off
Tap through the device menu screen and press and hold the “More” icon. Again, tap through the menu until the odel’s name and power off logo appear. Press and hold again to power off the device. -
Reset
Tap through the device menu screen and press and hold the “More” icon. Again, ap through the menu until the “Reset” icon appears. Press and hold again to reset the device. Note the reset option will place the device back to the factory settings. -
Screen ake Up Options
1. Tap the display screen button
2. Turn and raise your wrist to activate the screen wake-up function (Controlled via the App)
Tap the “Brightness Controller” icon to enter the menu to activate this function. A timer can also be set for this function.
Basic Operation Connected App:
The App has 4 main menu icons found on the bottom of the screen.
Home – This is where activity statistics are found.
My Health Rating
This will show a health rating based on the information completed in the user
profile section.
Healthy Habit
This is where activity logs are completed and where custom activities can be
created.
Set – This is where device settings can be adjusted.
Brightness Control – Adjusting screen wake-up function and adjusting a
schedule to turn ON/OFF.
Do Not Disturb – Turning this function ON/OFF and set a schedule.
Alarms – 8 Individual alarms can be set and adjusted.
Sedentary Reminder – Turning this function ON/OFF and set a schedule.
Find – This feature will activate the device to vibrate once to help
locate its position.
Remote Shutter – This feature allows a picture to be taken remotely with
the watch. Tap the “Remote Shutter” icon to enter the camera function. There
are 2 actions to take a picture, in the app by pressing the center circle
button, or via the connected watch device. Shake the wrist with the device
fitted, a 3-second countdown timer will be active prior to the picture being
taken.
Message Push – This feature allows the user to adjust what push
notifications are to be activated.
Note: For some notifications to work, applications may require permissions
to be adjusted to allow full functionality.
Reset Device – Resets the device to the factory settings.
Remove – Deletes all data from the device and App.
Other – Toggles the vibration setting for the device.
OTA Upgrade – Looks for the latest version of the App to be used and auto
updates.
Motion – This is where activities are tracked.
Walk/Run/ Bike – Tracks distance traveled in map mode in the App.
By tapping on the total distance tracker, it will enter the history of that
activity. You can also view history data by Day, Week and Month.
Mine – This is where the user profile is managed.
User Profile – This function is used to set up the user details to help
track data. This data is also used for the My Health Rating data to calculate
steps and calories burnt.
Basic Device Functions: JOLTFB2
Steps Menu:
Tracks steps taken for the day including distance traveled.
BPM Menu:
Tracks heart rate and shows last reading completed. Also reads blood oxygen
levels and blood pressure. To update readings, press and hold the front
button. History data can be found in the connected app in the “Home” menu tab.
Sports Menu:
Tap through the activities running, skipping, and sit-ups. Press and hold the
activity to activate. To end the activity press and hold the front button.
History data can be found in the connected app in the “Home” menu tab.
Messages Menu:
This menu will show the last message received.
Note: The device will not display images or pictures.
More Menu:
Camera Menu:
This menu will activate the camera function on the smart device only when the
app is open. To take a picture shake the wrist with the device fitted, a
3-second countdown timer will be active prior to the picture being taken.
Looking for Menu:
This menu will activate the connected smart device to make a loud tone to help
locate the connected smart device.
Theme Menu:
Toggle the time theme from a 24-hour display to a 12-hour clock display.
Reset Menu:
This menu will activate a reset of the device and default back to the factory
settings.
Power Menu:
This menu will power down the device and turn all functions off.
To turn it back on follow the power-on instructions.
Risks and Warnings:
Health Safety Notice:
The Jolt Fitness Bands and Smart Watches are not medical-grade device. It is a
fitness tracker/smartwatch and a general wellness device used to log, track, or
trend exercise activity. It does not make any medical claim and is not a
suitable replacement for a heart monitor. Please consult your doctor for
diagnostic purposes and to track any serious medical conditions.
WARNING: Do not dispose of unit in fire or water
- Never attempt to disassemble and reassemble
- Waste electrical products should never be disposed of with household waste. Check with your local authority for recycling advice
- Keep your device and all accessories out of reach of children or animals. Small parts may cause choking or serious injury f swallowed
- Avoid exposing your device to very cold or very hot temperatures (below 0°C or above 45°C). Extreme temperatures can cause deforming of the device and reduce charging capacity and the life of your device
- The device may become warm while charging
- Do not use chemicals in this product
- Avoid dropping the product as this could damage the product
- Do not use any other charger other than the supplied charger
- Contains a lithium battery
App Store is a service mark of Apple Inc. Android, the “Google Play” logo, and
the “works with
Google Assistant” logo are trademark of Google inc.
Proudly brought to you by:
PO Box 5658 Brendale
QLD Australia 4500
Customer Support
1800 812 261
www.crest.com.au
AUSTRALIAN OWNED
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>