CAL-ROYAL PST-201 Series Panic Saddle Threshold Installation Guide
- June 12, 2024
- CAL-ROYAL
Table of Contents
CAL-ROYAL PST-201 Series Panic Saddle Threshold Installation Guide
DIMENSIONS
Screw Size: #10 x 1-1/2″ PFHWS
INSTALLATION INSTRUCTIONS
- Carefully measure to fit within the frame opening and make sure the WJOZl makes contact with door face when door is closed.
- If necessary trim and notch the threshold ends to accommodate the side jamb stops.
- Trim seal 1/8” longer than the retainer threshold at each end.
- Mark and drill pilot holes through the pre-drilled holes in the threshold and fasten with screws provided. Use a weatherproof sealant at all edges and joints.
- Operate the door multiple times to ensure proper adjustment so as not to prevent the door from self-closing and latching.
MATERIAL FOR USE IN LISTED STEEL FRAMES AND CLASSIFIED HOLLOW METAL STEEL COMPOSITE TYPE FIRE DOORS ARE RATED UP TO AND INCLUDING 3 HOURS, WOOD COMPOSITE TYPE FIRE DOORS ARE RATED UP TO AND INCLUDING 1-1/2 HOURS, AND WOOD CORE FIRE DOORS ARE RATED 20 MINUTES WITHOUT HOSE STREAM.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>