Lanxingxin H650 Bluetooth Headset Instruction Manual
- July 31, 2024
- Lanxingxin
Table of Contents
H650 Bluetooth Headset
“`html
Product Specifications
- Model: H650
- Operating Frequency Range: 2.4GHz
- Working Temperature: 0-45°C
- Frequency Receiving Range: 15M (indoor), 10M (outdoor)
- Earphone Charging Time: about 1.5 hours
- Talk Time: about 30 hours (at 60% volume)
- Music Playback Time: about 30 hours (at 60% volume)
- Stand-by Time: about 200 hours
- Weight: about 222g
- Charging Interface: TYPE-C USB cable
Product Usage Instructions
Power On/Off
To power on the Bluetooth headset, hold down the function key
for 3 seconds. To power off, repeat the same process.
Charging Instructions
Plug one end of the USB Type-C charging cable into the USB port
of the headset, and the other end into a charger. The red LED will
light up during charging and turn off when fully charged.
Function Description
- TYPE-C Charging Port
- ANC (Active Noise Cancellation) On/Off
- Bluetooth Switch
- Volume Adjustment
- Music Playback Control
- AUX Input
Connection Mode Description
-
Press and hold the function key for 3 seconds to power on. The
red and blue lights will flash alternately to enter pairing
mode. -
Activate Bluetooth on your mobile device, select the Bluetooth
headset model to pair. -
Upon successful pairing, the earphone will emit a tone and the
indicator will show a slow blinking blue light.
Matters Need Attention
NCC Warnings and FCC Statement
This device complies with part 15 of the FCC Rules. Please
follow guidelines to avoid harmful interference.
RF Exposure Information
The device meets general RF exposure requirements and can be
used without restriction in portable exposure conditions.
Frequently Asked Questions (FAQ)
Q: How do I know when the headset is fully charged?
A: The red LED indicator on the headset will turn off when it is
fully charged.
Q: How do I activate the ANC feature?
A: Press the corresponding button to turn on or off the Active
Noise Cancellation feature.
“`
bluetooth headset Chinese instruction manual
OPERATION INSTRUCTIONS Model: H650
Product Specifications Bluetooth Technology:Bluetooth 5.3 Model H650 Support
mode HFP/ HSP/ A2DP/ AVRCP VDC DC 5V/0.27A MAH 350mAh Microphone sensitivity-
38dB ± 1dB
SPL102dB ± 3dB FRF20Hz~20KHz
operating frequency range 2.4GHz
Working Temperature 0-45 C Frequency receiving range 15M(indoor) Earphone charging time about 1.5 hour ALK TIME about 30 hour (60% volume)
10M(outdoor)
Music playback time about 30 hour (60% volume)
stand-by time about 200 hour weightabout 222g
Charginginterface TYPE-C USBcable 30m Package contents: manual, Bluetooth
headset, charging cable
Function description
Power on: Hold down the function key for 3 seconds to power on.
Shutdown: Press and hold the function key for 3 seconds to power on Enter the
pairing mode: automatically enter the search state when the startup state, and
the indicator flashes red and blue alternately Play Pause/Stop: Click the
function key Volume Plus: Press and hold the + key. Volume Down: Press and
hold the – key. Next: Press the + key. Previous: Short press – key. Enter
noise reduction mode ON: Press ANC button for 2 seconds in off/machine state,
the green indicator is on when ANC ON is on and off when green indicator is
off Answer an incoming call: When you receive an incoming call, press the
answer key. Hang up an incoming call: During a mobile phone call, press the
hang up key. Call rejection: When an incoming call comes in, hold down the
function key for 2 seconds. Call back: Double-click the call button.
TYPE-C Charging port
ANC Active noise reduction on
Bluetooth switch Volume down/up
Volume plus/minus music
AUX input
Connection mode description 1. Press and hold the function key for 3 seconds
to power on. The red and blue lights flash alternately to enter the search
pairing state. 2. Activate the Bluetooth function of the mobile phone or other
devices, and click to enter the pair after finding the model of the Bluetooth
headset; When the pairing is successful, the earphone will emit a tone
indicating that the connection is successful, and the indicator will show a
blue light blinking slowly
Charging instructions: Plug one end of the USB Type-C charging cable into the
USB port of the headset, and plug one end into the charger to charge the
headset. The red LED will light up, and the red LED will turn off after being
fully charged.
Troubleshooting: · Can not be turned on – please check whether the battery is
normal, low power please re-charge. Bluetooth is connected, no sound is played
– check that the phone is silent or at the lowest volume. · Cannot enter the
pairing mode – in the startup state, long press the power button to shut down,
restart, and follow the pairing instructions to re-pair.
matters need attention
Do not close to any fire and heat sources, do not disassemble, repair
products. · Do not play music at high volume for a long time to avoid hearing
damage
NCC Warnings
Without approval, companies, companies or users shall not arbitrarily change
the frequency, increase the power or change the characteristics and functions
of the original design of the low-power RF equipment that has obtained the
inspection certificate. The use of low-power RF devices shall not affect
flight safety or interfere with legitimate communications; When interference
is found, it should be stopped immediately, and it can be continued to use
when there is no interference. The above-mentioned lawful communications refer
to radio communications operated in accordance with the provisions of the
Telecommunications Administration Law.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: ·Reorient or relocate the receiving antenna.
·Increase the separation between the equipment and receiver. ·Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. ·Consult the dealer or an experienced radio/TV
technician for help. Caution: Any changes or modifications to this device not
explicitly approved by manufacturer could void your authority to operate this
equipment.
RF Exposure Information The device has been evaluated to meet general RF
exposure requirement. The device can be used in portable exposure condition
without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>