smania AV635HWH Boralite Battery-Powered Drill Instructions

smania AV635HWH Boralite Battery-Powered Drill

Product Information

The Boralite Battery-Powered Drill is a versatile tool designed for various drilling and screwdriving applications. It comes with a range of features and components to enhance user experience and efficiency.

Technical Specifications

• Keyless chuck for easy bit changes
• Torque selector with 25 torque settings
• Speed change switch for adjustable drilling speeds
• LED work light for improved visibility in dark areas
• Rotation switch and switch lock for convenient operation
• ON/OFF switch for powering the device
• Battery pack for cordless operation
• Charger for recharging the battery pack

Components

1. Keyless chuck
2. Torque selector
3. Speed change switch
4. LED work light
5. Rotation switch and switch lock
6. ON/OFF switch
7. Battery pack
8. Charger

Product Usage Instructions

Charging the Battery Pack

1. Plug the charger into a wall socket.
2. Connect the power connector of the charger into the battery charge socket.
3. The charger indicator light will show green when charging and red when not charging.
4. Once the battery pack is fully charged, disconnect the charger from the battery charge socket and unplug it from the wall socket.

Installing a Battery Pack

CAUTION: Ensure the device is turned off before installing or removing the battery pack.

1. Align the tongue on the battery pack with the groove in the housing and slide it into place until it locks with a click.
2. To remove the battery pack, press the red button on the front of the battery pack and slide it out of the tool.

Inserting Bits

WARNING: Never use the drill power to rotate the chuck body when loosening or tightening bits.

1. Grasp and hold the chuck collar with one hand.
2. Rotate the chuck body in a counterclockwise direction to open the chuck jaws wide enough to accept the bit.
3. Insert the bit fully into the chuck jaws, ensuring it is properly aligned and not at an angle.
4. Tighten the chuck jaws by rotating the chuck body in a clockwise direction. Hand tighten only, do not use pliers.

Removing Bits

1. Grasp and hold the chuck collar with one hand.
2. Rotate the chuck body in a counterclockwise direction to release and remove the bit.

Turning the Device On and Off

1. Press the ON/OFF switch to turn the device on.
2. Release the ON/OFF switch to turn the device off. The LED work light will illuminate when the device is turned on.

Left/Right Rotation Switch and Switch Lock

The rotation switch can be set to left or right rotation. Engage the switch lock position for continuous operation.

Setting the Torque

The torque selector allows you to adjust the torque setting based on the hardness of the workpiece. Choose from 25 different torque settings, with 1 being the lowest and 25 being the highest. Use a leftover piece of material to determine the ideal torque.

Speed Change Switch

The speed change switch enables you to work at lower (1) or higher (2) drilling speeds. Adjust the switch position on top of the power tool accordingly to avoid damaging the workpiece.

INSTRUCTIONS

BORALITE BATTERY-POWERED DRILL

PACKAGE CONTENTS

• Charger
• 34-piece bit set
• 2× battery pack
• Battery-powered drill
• Case

TECHNICAL SPECIFICATIONS

• Chuck design: keyless
• Chuck size: 0.8–10 mm
• No-load RPM: 0–350 / 0–1450
• Rated torque: 36 Nm
• Battery type: Li-ion
• Battery capacity: 2000 mAh
• Battery voltage: 21 V
• Battery charging temperature: 10–40 °C
• Charger adapter input: 100–240 V
• Charging time: 1–2 hours

COMPONENTS

1. Keyless chuck
2. Torque selector
3. Speed change switch
4. LED work light
5. Rotation switch and switch lock
6. ON/OFF switch
7. Battery pack
8. Charger

HOW TO USE

CHARGING THE BATTERY PACK

1. Plug the charger into the wall socket.
2. Plug the power connector of the charger into the charge socket on top of the battery pack.
   • Once the battery is completely charged, a green light on the mains adapter lights up.
   • The device cannot be operated during charging.
   • The charger and the battery heat up during charging. This is due to operating conditions and not a defect.
3. Once the device has finished charging, disconnect the charger from the battery charge socket and the plug from the wall socket.

INSTALLING A BATTERY PACK

CAUTION:

• Always switch off the tool before installing or removing the battery pack.
• Hold the device and the battery pack firmly when installing or removing the battery pack.
• To install the battery pack, align the tongue on the battery pack with the groove in the housing and slip it into place. Insert it all the way until it locks in place with a little click.
• To remove the battery pack, slide it from the tool while pressing the red button on the front of the battery pack.

INSERTING BITS

WARNING : Never hold the chuck body with one hand and use the drill power to rotate the drill body to loosen or tighten bits. This may result in serious injury.

1. To open the keyless drill chuck, grasp and hold the chuck collar with one hand. Rotate the chuck body with the other hand in a counterclockwise direction until the chuck jaws open wide enough to accept the bit.

2. Insert the bit into the full length of the chuck jaws. Raise the front of your drill slightly to prevent the bit from falling out of the chuck jaws.

3.  Tighten the chuck jaws onto the bit by turning the chuck body in a clockwise direction.
   NOTE : Make sure the bit is properly aligned in the jaws and NOT at an angle. An improperly aligned bit could be thrown from the chuck when the drill is started.

4. Finish tightening the chuck jaws by holding the chuck collar with one hand and firmly tightening the chuck body by rotating it in a clockwise direction.
   NOTE : Hand tighten chuck jaws. Do NOT use pliers.

REMOVING BITS

1. To open the keyless drill chuck, grasp and hold the chuck collar with one hand. Rotate the chuck body with the other hand in a counterclockwise direction until the chuck jaws open and release the bit.
2. Remove the drill bit.

TURNING THE DEVICE ON AND OFF

1. Press the ON/OFF switch to turn the device on.
2. Let go of the ON/OFF switch to turn the device off.

The device features an LED work light. It lights up when pressing the ON/OFF switch.

LEFT/RIGHT ROTATION SWITCH AND SWITCH LOCK

The rotational direction of the device can be set with the left/right rotation switch and the switch lock

• Slide the left/right rotation switch to the left. The device rotates clockwise.
• Slide the left/right rotation switch to the right. The device rotates counterclockwise.
• Slide the left/right rotation switch to the center position to activate the switch lock.

SETTING THE TORQUE

The torque can be adapted to the hardness of the workpiece with the torque selector. 1 is the lowest and 25 the highest torque setting. When set correctly, the slip clutch engages when the screw head is level with the workpiece. Use a leftover piece of material to determine the ideal torque.

SPEED CHANGE SWITCH

You can work with a lower (1) or higher (2) speed setting depending on the position of the selector switch on top of the power tool. To avoid damaging the gear unit you should only change over gears when the tool has stopped.

USEFUL WORK TIPS

The following information helps you to achieve the best possible results when working with the device:

• It allows you to screw threaded screws into soft woods without predrilling. For other woods, we recommend predrilling the hole, especially in the case of large screw diameters.
• Countersink the drill holes if you want to use countersunk screws.
• When using screws without a continuous thread, predrill approximately half the screw length.

SCREWING

1. Insert a bit (see section Inserting bits).
2. Set the torque selector (see section Setting the torque). Start with a slow speed and increase this as required.
3. Set the desired rotational direction with the left/right rotation switch.
4. Insert the bit straight into the screw slot.
5. Press the ON/OFF switch to turn the device on.
6. To stop screwing, let go of the ON/OFF switch.
7. Let the device and the accessories cool down completely once you have finished your work.
8. Remove the bit.

WARNINGS

GENERAL SAFETY

• Keep your work area tidy and well lit.
• Do not operate a power tool in explosive atmospheres, such as in the presence of flammable liquids, gases or dust.
• Keep children and bystanders away while operating a power tool.
• Do not expose power tools to rain or wet conditions.
• Use personal protective equipment. Always wear eye protection.
• Do not wear loose clothing or jewelry. Keep your hair and clothing away from moving parts.
• Keep the power tool out of the reach of children when not in use.
• Only charge the batteries using chargers recommended by the manufacturer.
• Do not use a damaged or modified battery.
• Do not expose batteries to fire or excessive temperatures.
• Never service damaged battery packs.

SAFETY NOTES FOR POWER TOOL

• Keep the device and its accessories away from hot surfaces.
• Persons with physical or mental impairments must not use the device and its accessories unsupervised.
• Children must not play with, clean or service the device and its accessories.
• Only use bits that fit into the power tool’s retaining system.
• Let the tool cool down after use before touching it.
• Always wait until all moving parts come to a standstill after working with the tool.

USING AND HANDLING THE CHARGER

• Always allow sufficient ventilation when charging the battery; gases may develop.
• Keep the charger away from any type of moisture.
• Never use the charger in environments where there are explosive or flammable materials.
• Do not place objects on top of the charger and do not cover the charger.
• Keep the charger away from heat sources.
• Regularly check the charger for damage.
• The charger must not be disassembled. Repairs must only be undertaken by an approved technical customer service department.
• Always unplug the charger from the power supply after use.

WARRANTY

The warranty is valid for 24 months. You can claim it from DFVU d.o.o., Liparjeva 6a, 1234 Mengeš, Slovenia, for a replacement product or a refund. Send us your order number and purchase date in the email, which is available by clicking on our logo in the bottom right corner. The product has a lifetime of 24 months from the date of collection.

WEEE disposal and recycling symbol. The WEEE symbol is attached to the product in compliance with the EU directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). It is intended to deter the improper disposal of this product and to promote reuse and recycling.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>