JONATHAN Y JYL9913A Quinn 15.5 Inch 2 Light Mid Century Modern Iron Acrylic LED Sconce Instruction Manual
- June 12, 2024
- JONATHAN Y
Table of Contents
JONATHAN Y JYL9913A Quinn 15.5 Inch 2 Light Mid Century Modern Iron Acrylic
LED Sconce Instruction Manual
WARNING
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED
ELECTRICIAN. WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN
FUSE BOX/CIRCUIT BREAKER BEFORE INSTALLATION.
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN
INSTALLED
CARE AND MAINTENANCE
To clean the outside of the fixture, use a dry or slightly dampened clean
cloth (use clean water, never a solvent) to wipe the surface of the fixture.
To clean the inside of the fixture, first disconnect power to the fixture by
turning off the circuit breaker or by removing the fuse at the fuse box. Next,
use a dry or slighly damperned clean clorth (use clean water, never a solvent)
to wipe the interior surface of the fixture.
Do not use any cleaners with chemical, solvents or harsh abrasives. Use only a
dry soft cloth to dust or
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
- Please make sure that you have all parts indicated before you begin assembly of this item
- This item should be assembled on a soft surface to prevent scratching the finish during assembly
- To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation
- The external flexible cable or cord of this lamp cannot be replaced
If the cord is damaged, the lamp shall be destroyed
Part List and Hardware List
PIECE| DESCRIPTION| PICTURE| QUANTITY| PIECE|
DESCRIPTION| PICTURE| QUANTITY
---|---|---|---|---|---|---|---
A| machine Screw| | 2X| F| Screw| | 6X
B| Mounting Bracket| | 1X| G| Wrench| | 1X
C| Wire Connectors| | 3X| H| Acrylic Shade| | 2X
D| Back Plate| | 1X| I| Bulb| | 2X
E| Machine Screw| | 2X| | | |
Product Dimensions
4.7”W X 15.4″H X 5″E
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 20 minutes.
- Fix the Mounting Bracket(B) to the outlet box with machine Screw(A).
- Make wire connections, with Wire Connectors(C), following the reference chart listed below
Connect, Hot, Black or Red Outlet Supply Wire to| Connect, Neutral, White Outlet Supply Wire to:
---|---
Black| White
- Parallel Cord (round & smooth)| * Parallel Cord (square & ridged)
Clear, Brown, Gold or Black without Tracer (colored stripes)| Clear, Brown, Gold or Black with Tracer (colored stripes)
Insulated Wire (not green) with copper metal conductor| Insulated Wire (not green) with Silver metal conductor
*Note: When parallel wire ( SPT I & SPT II ) is used. The neutral wire is
square shaped and ridged and the hot wire will be round in shape and smooth. (
See Illustration on left. )
Grounding Instructions
a) For installation in the United States: Wrap ground wire from outlet
box around green ground screw on mounting bracket, no less than 2″ from wire
end. Tighten ground screw. If fixture is supplied with a ground wire, connect
to outlet ground wire with a wire connector.
b) For installation in Canada: If fixture is supplied with ground wire,
wrap ground wire around green grounding screw on mounting bracket. Tighten
ground screw.
- Orient the Back Plate (D) so that the holes in the ears on the side of the mounting bracket are aligned with the holes in the rear plate, and then secure with Machine Screws (E).
- Install Bulb( I ). Be sure to use light Bulb( I ) with wattage no greater than specified on this fixture. Always make sure that electrical current is turned off before changing bulbs.
- Install the Acrylic Shade (H) on the Back Plate (D) and secure the Acrylic Shade (H) with a Wrench (G) by turning the Screw (F) clockwise
PLEASUE USE TYPE”A” BULB MAX 40-WATT OR CFL BULB MAX 13-WATT OR LED MAX 9-WATT THERE ARE 2 X 4W LED BULBS IN THE BOX.
ENJOY YOUR LAMP
Documents / Resources
|
JONATHAN Y JYL9913A Quinn 15.5 Inch 2 Light Mid Century Modern Iron Acrylic
LED
Sconce
[pdf] Instruction Manual
JYL9913A Quinn 15.5 Inch 2 Light Mid Century Modern Iron Acrylic LED Sconce,
JYL9913A, Quinn 15.5 Inch 2 Light Mid Century Modern Iron Acrylic LED Sconce,
Modern Iron Acrylic LED Sconce, Iron Acrylic LED Sconce, Acrylic LED Sconce,
LED Sconce
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>