CERBERUS PYROTRONICS PSE-1 and PSE-2 Enclosures for the PXL Instructions

: June 9, 2024
: CERBERUS PYROTRONICS

Table of Contents

CERBERUS PYROTRONICS PSE-1 and PSE-2 Enclosures for the PXL
SPECIFICATIONS
Introduction
Description
Ordering Information
Dimensional Drawings
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CERBERUS PYROTRONICS PSE-1 and PSE-2 Enclosures for the PXL

CERBERUS-PYROTRONICS-PSE-1-and-PSE-2-Enclosures-for-the-PXL-
product

SPECIFICATIONS

PSE-1 Houses 16 Zones, 4 NAC’s, 10 Amp Power Supply and 15 Amp Hour Battery Set
PSE-2 House a Maximum 32 Zone System With 2-10 Amp Power Supplies, 16 NAC’s and 32 Programmable Relays
Constructed of Sturdy 16 Ga. Steel
Available in Black or Red
Standard Key Access
Dead-Front Option
Flush Trim Option
Listed, ULC Listed

Introduction

The PSE-1 and PSE-2 enclosures are built in the tradition of all Cerberus Pyrotronics systems. They are sturdy for long life and attractive to add to your buildings appearance. When used in a PXL fire alarm system it is listed by Underwriters Laboratories, Inc. and Underwriters Laboratories of Canada.

Description

The PSE-1 houses a PXL system including up to 16 initiating device circuits, one power supply module PPS- 10M, one transformer model PTX-12 and 15 Amp hour battery set. Up to either 2 PNC-2Z NAC modules or 2 PRM-4 Relay Modules (or one of each) can also be
housed in the enclosure.
The PSE-2 can house all the above equipment and expand the system to its maximum compliment of 32 IDC’s, 16 NAC’s, 32 relays and 2 power supplies. When 2 power supplies are installed, 2 PTX-12 transformers are required and can be installed in the enclosure. The PSE-2 comes complete with a battery bracket which allows for mounting 2-15 AH battery sets. The bracket can be removed and one model BTX-1, 31 AH battery set can be installed; or one PMK-2 bracket which holds 8 relay modules, model PRM-4, can be installed. Additional battery sets should be removed to a separate enclosure such as the Model BB-55 battery box.
Semi-flush trim and dead front options are available for boththe PSE-1 and PSE-2 enclosures. They come standard in Cerberus Pyrotronics black, however, both enclosures and flush trim kits are available in red to satisfy local code requirements. Both enclosures include module mounting bracket(s), model PMK-1.

Ordering Information

Model	Description	Part Number
PSE-1	PXL Small Enclosure – Black	500-693690
PSE-2	PXL Large Enclosure – Black	500-694252
PSE-1R	PXL Small Enclosure – Red	500-694271
PSE-2R	PXL Large Enclosure – Red	500-694272
PDF-1	PXL Small Dead Front Door	500-694068
PDF-2	PXL Large Dead Front Door	500-694254
PFK-1	PXL Small Enclosure Flush Trim	500-694273
PFK-1R	PXL Red Flush Trim for PSE 1/1R	500-695106
PFK-2	PXL Large Enclosure Flush Trim	500-694256
PFK-2R	PXL Red Flush Trim for PSE-2/2R	500-695335
PMK-1	Spare Mounting Bracket	500-693691
PMK-2	Relay Mounting Bracket	500-694253

For more information on PXL please refer to catalog #8100.
The installation Instruction for the PSE-1 is P/N 315-094154.
The installation Instruction for the PSE-2 is P/N 315-095069.