RENISHAW SFM-A2 Surface Finish Probe Module Installation Guide
- June 4, 2024
- RENISHAW
Table of Contents
SFM-A2 Surface Finish Probe Module
**Installation Guide
**
SFM-A2 Surface finish probe module
Enhanced access and inspection capability for integrated surface finish
measurement
The SFP2 system consists of a probe and a range of SFM modules that have been
designed to suit the demands of specific parts and features encountered in a
precision manufacturing environment. The probe and modules can be
automatically interchanged with all other REVO® probe options, providing the
flexibility to easily select the optimum tool to inspect a wide range of
features. Each SFM module is its own miniature measuring device, incorporating
Renishaw’s proprietary encoder system to transduce the motion of the stylus
tip.
Features
The A-series of modules is designed to deliver high performance with a good level of capability to access part features. The cranked skid arm design of the A2 module provides additional clearance around part features.
Typical applications
General purpose; engine block gasket face, lateral scanning of crankshaft bearing journals.
Specification
| Diamond tip radius (pm) | 2 or 5 |
|---|---|
| Surface finish measurement range (pm) | 2 pm modules |
| 5 pm modules | 6.3 to 0.10 Ra |
| Typical surface finish accuracy (of nominal Ra) * | ±(5% + 15 nm) |
| Skid / stylus arrangement | Side-by-side |
| Skid material | DLC coated stainless steel |
| Nominal stylus tip protrusion beyond skid (mm) | 0.5 |
| Skid length / radius (mm) | 4/ 40 |
| Skid width / radius (mm) | 2 / 12.5 |
| Skid contact force (N) | 0.2 |
| Stylus contact force (N) | 0.003 |
| SFM / SFH knuckle adjustment range | ±90° |
| Weight (g) | 12 |
| Resolution (nm) | 1 |
| Measurement speed (mm/s) | Up to 1 |
| Stylus holder compatibility | SFH-1, SFH-2 |
| Lateral scanning capability | Yes |
- Accuracy values are dependent upon a number of system variables. These include the machine size and configuration, scan orientation, condition of stylus tip, part fixturing system, and environmental noise.
All dimensions in mm.
www.renishaw.com/SFP2
+44 (0) 1453 524524
[email protected]
© 20172021 Renishaw plc. All rights reserved. RENISHAW® and the probe symbol
are registered trade marks of Renishaw plc. Renishaw product names,
designations and the mark `apply innovation’ are trademarks of Renishaw plc or
its subsidiaries. Other brands, products or company names are trademarks of
their respective owners. Renishaw plc. Registered in England and Wales.
Company no: 1106260. Registered office: New Mills, Wotton-under-Edge, Glos,
GL12 8JR, UK. WHILE CONSIDERABLE EFFORT WAS MADE TO VERIFY THE ACCURACY OF
THIS DOCUMENT AT PUBLICATION, ALL WARRANTIES, CONDITIONS, REPRESENTATIONS, AND
LIABILITY, HOWSOEVER ARISING, ARE EXCLUDED TO THE EXTENT PERMITTED BY LAW.
renishaw
Part no.: H-1000-2291-05-A Issued: 10.2021