TAKSTAR V3 Lavalier Microphone User Manual

V3 Lavalier Microphone
User Manual

Preface

Dear Customer,
Thank you for purchasing Takstar V3 Lavalier Microphone. In order to better understand and use the product, please read this manual carefully.
If you have any questions or suggestions, please contact our local dealer,

Features

• 2.4GHz wireless transmission, stable and effective up to about 120m.
• One-key pairing, automatic sync after powering up, easy to operate.
• 360° omnidirectional mic with smart noise reduction for clear recording.
• Charge your phone while in use without issue.
• Noise reduction algorithm to record accurately in various conditions.
• Real-time monitoring for better field control.
• Lithium-polymer battery inside lasts for up to 6.5hrs.
• Built-in reverb function, start karaoke anywhere, anytime.
• Comes with a high-grade storage bag for easy carrying outdoors.

Applications
Live broadcast, vlog, filming, interview

Package Contents

Specifications

Transmitter

• Frequency Range: 14GHz
• Frequency Response: 20-20KHz
• S/N Ratio: 64dB (A)
• Sensitivity: -38dBFS
• Transmission Delay: 25ms
• Charge Input Voltage: DC4.8-5.4V
• Fully Charged Voltage: 4.15-4.2V
• Low Power Shutdown Voltage: <3.4V
• Power-on Current: 17.8mA-18.5mA
• Search Current: 18.5mA-21 mA
• Charge Current: approx. 100mA
• Operating Current(w/o earphone): 17.8mA-19mA
• Operating Current (w/earphone): 18.2mA-26mA
• Shutdown Current: 7.5uA
• Charging Time: approx. 90min
• Operation Time: approx. 6.5H
• Battery Capacity: 120mAh (w/Lithium battery protection board)
• Battery Size: 651220
• Battery Weight: 2.5g
• Antenna: ceramic antenna
• Indicator Light: RGB tri-color
• Charging/Monitoring Interface: TPYE-C
• Weight: 8.7g
• Dimensions: 46.3115.518.14mm

Receiver

• Frequency Range: 2,4GHz
• Frequency Response: 20Hz-20KHz
• S/N Ratio: 64dB (A)
• Search Current: 21 mA-22.5mA
• Power-on Current: 33.5mA-35mA
• Power Supply: plug-in device
• Indicator Light: green, red
• Earphone Interface: 3.5MM
• Weight: approx. 5.8g
• Dimensions: 45.527.279.65mm
• Operating Current: 34mA-40mA

Note: The above data is measured by Takstar laboratory.

Function Descriptions

1. Receiver Type-C
2. Type-C Charging Port
3. Function Switch Button
4. De noise Switch/Volume Key
5. 3.5 mm Monitor output
6. Power/Mute
7. Type-C Monitor/Charging Port
8. Transmitter Indicator
9. Receiver Indicator

Transmitter

flash
Clear paring| Press the power button 3 times within 10 s after power-off| Rapid red & green flash
Muted/Unmuted| Press the power button to mute/unmute
Muted: pause recording
Unmuted: start recording| Muted: rapid green flash
Voice prompt: mic disabled
Unmuted: solid green light
Voce prompt: mic enabled
Charge| Connec: the Type-C charging cable to charge| Charging: solid rec light
Full: light off

Receiver

red & green flash
Charge phone| Insert the Android charging cable into Type-C port to charge the phone.| /
Muted/Unmuted| Pre and hold [ / ] button to mute/unmute| Muted: rapid green flash;
Voice prompt: mic enabled
Unmuted: solid green light;
Voice prompt: mir enabled
Reverb| Press and hold [ / ] button twice| Reverb ON: red flash once,
voice prompt: reverb ON.
Reverb mode off: red flash twice,
Voice prompt: noise reduction OFF.
Raw/Noise- reduction| Press and hold the [+ -] key| Respective incitation:
Raw audio mode: green flash once,
Voice prompt: noise reduction OFF.
Noise reduction mode! green flash twice,
Voice prompt: noise reduction ON.
Mic volume level| Press the [+ -] key once| Cycle through 3 levels
Respective prompt tone:
Red Lash once (level 1)
Prompt tone: Doo
Red Lash twice (level 2)
Prompt tone: Doo Doo
Red Lash three times (level 3) prompt tone: Doo Doo Doo

Operation Instructions

1. Device Connection
   Insert the receiver into phone/computer, and it will automatically power up. Then the device LED flashes green slowly in search of a connection. Once paired successfully, the receiver and transmitter LEDs will turn solid green.

2. Phone Connection
   Insert the receiver Type-C plug into your phone. Once both LEDs on the receiver and transmitter turn solid green, you can use the mic for recording.

3. Windows System Settings
   Insert the receiver Type-C plug into computer Type-C port directly or into computer USB-A port via the included Type-C to USB-A adapter. After the LEDs on receiver and transmitter turn solid green, click bottom right corner in Windows: Open Sounds settings » Input » Select “TAKSTAR V3” .

4. macOS System Settings
   Insert the receiver Type-C plug into the computer Type-C interface. After the LEDs on receiver and transmitter turn solid green, go to System Preferences » Sound » select speaker under “Output” tab » select “TAKSTAR V3” as default under “Input” tab.

5. Enable OTG Connection (Android 05 only) Take OPPO A72 as example
   

   Step 1 Go to Settings| Step 2 Go to Other Settings| Step 3 Tap OTG Connection

6. Furry Windscreen Installation Align the plastic buckle of the windscreen with the groove of the transmitter mic, insert and rotate 90° clockwise to secure it. Insert downwards » Rotate 90° clockwise

Troubleshooting

If the device fails to pair, you can press the power buttons of the transmitter and receiver 3 times within 10 s after plugging in the receiver to clear their pairing history, which is indicated by rapid red and green flashes. Then, press their power buttons 3 times again to re-pair. Retry afore steps if it fails.

Safety Instructions

To avoid electric shock, overheat, fire, radiation, explosion, mechanical risk and injury or property loss due to improper use, please read and observe the following items before use:

1. Please check if the power of the connected equipment matches with that of this product before operation. Adjust the volume to proper level during operation. Do not operate at over-power or high-volume level for extended time to avoid product malfunction or hearing impairment.
2. If there is any abnormality during use (e.g., smoke, strange odor), please kill the power switch and unplug from power source, then send the product to the local dealer for repair.
3. Never use any replacement battery with broken insulation. Do not charge non-chargeable battery.
4. Keep this product and its accessories in a dry and ventilated area. Do not store in a humid or dusty area for extended time. Keep away from fire, rain, liquid intrusion, bumping, throwing, vibrating, or from blocking any ventilation openings, to prevent malfunction.
5. The product must, when installed on walls or ceilings, be fixed firmly in place at adequate strength to prevent from falling.
6. Please abide by safety rules during operation. Do not use the product in places prohibited by laws or regulations to avoid accident.
7. Do not disassemble or repair the product by yourself to avoid injury. If you have any questions or require any services, please contact our local dealer.

Label Meanings

** This device is compliant with the limits of the European Council Directive on the approximation of the laws of the member states relating to electromagnetic compatibility according to RL2004/108/EG and European Low Voltage Directive RL2006/95/EG.
Note:** This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These Limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the complying party may cause the user to lose permission to operate the device. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

This symbol indicates that this product should not be disposed of with your household waste, according to the WEEE directive (2012/19/EU) and your national law. This product should be handed over to an authorized collection site for recycling waste electrical and electronic equipment (WEEE). Improper handling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with WEEE. At the same time, your cooperation in the correct disposal of this product will contribute to the effective usage of natural resources. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, waste authority, or your household waste disposal service.

About This Manual

This manual contains up-to-date technical specifications as of printing. However, specifications contained herein may not conform to your particular product since Takstar is constantly improving its products. Also, specifications, devices or accessories available may vary from region to region. If you have any questions, please contact our local dealer. For the latest version/more information, please visit our website: https://www.takstar.com/

Scan for more product informationhttp://www.takstar.com/

Guangdong Takstar Electronic Co., Ltd.
Address: No. 2 Fu Ka ng Yi Rd., Longxi Boluo
Huizhou, Guangdong 516121, China
Tel: 86 752 6383644
Fax: 86 752 6383952
Email: sales@takstar.com
Website: www.takstar.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>