VIDEX INDEX:VL-SLE16-505 LED Street Lamp User Manual
- June 12, 2024
- VIDEX
Table of Contents
VIDEX INDEXVL-SLE16-505 LED Street Lamp
INTERPRETATION OF ICONS
-
Rated voltage, frequency;
-
On-mode power (Pon);
-
Rated luminous flux;
3.1. Useful luminous flux (Clluse)):
3.2. Energy efficiency class according to Commission Regulation (Eu)n 2019/2020;
3.3. Energy efficiency class according to the technical regulations of Ukraine:
-
Correlated color temperature;
-
Not compatible with lighting dimmers:
-
Color rendering index:
-
Warm-up time to 100% of luminous flux:
-
Mercury-free;
-
Longitudinal and transverse beam angles:
-
Lifetime (L,0B50):
-
Ingress protection. The product protected against dust and water jets:
-
ON/OFF cycles;
-
Mechanical impacts protection:
-
Product compliable with standards of eco-design and energy labeling according to Commission Regulation (Eu) 2019/2020:
-
Electric shock protection class 1: A product, in which protection against electric shock is provided not only by means of basic insulation, but also through additional safety measures, i.e. extra protective circuit to which protective conductor of the fixed feeding installation needs to be connected;
-
Minimum distance from the illuminated object;
-
For industrial indoor use:
-
For outdoor use:
-
The containing LED light source cannot be replaced;
-
Do not use the product with damaged diffuser. Replace damaged diffuser immediately;
-
The product complies with the technical regulations of Ukraine;
-
The product meets requirements of EU directives.
ENVIRONMENTAL PROTECTION
- Pursuant to the provisions of the WEEE Act, it is forbidden to put waste equipment marked with the symbol of a crossed bin together with other waste. The user, wishing to get rid of electronic and electrical equipment, is obliged to return it to a waste equipment collection point. There are no hazardous components in the equipment that have a particularly negative impact on the environment and human health.
- Overall dimensions (mm), product weight (g/kg), rated current (mA), operating temperatures range (‘C), production date and batch number are indicated on individual packaging:
- Maximum installation height: 7 m:
- Maximum projection area: 500 m’:
- Light power curve type: Semi-wide (L).
PRODUCT’S PURPOSE AND APPLICATION
This product is intended for lighting sidewalks, park paths, local roads, and industrial facilities. Not intended for use in domestic premises.
INCLUDED
- The street light
- User’s manual
- Individual box
MOUNTING INSTRUCTIONS
Read user’s manual before mounting. Mounting must be performed by
appropriate qualified specialist. Mounting should always be provided with
disconnected power supply. Please perform mounting according to diagram
below. For installation and further use, only the method of mounting on the
console is provided. The maximum diameter of the mounting hole is 62 mm.
Product has grounding wire. Failure to connect the grounding wire may lead to
electric shock. Connection must be done with a distribution box (not included)
of the same rate of protection against dust and moisture as the rate of the
light. Before the first use it is necessary to verify correct mechanical
fastening and connection. The product can only be used at the mains, which
meets energy requirements and quality standards provided by law.
FUNCTIONAL CHARACTERISTICS
This product can be used indoor and outdoor.
MAINTENANCE AND SAFETY INSTRUCTIONS
Any maintenance activities should be carried out with electricity switched off, the product has cooled down and dry. Product can heat up to a high temperature. Do not cover the product, ensure free air access. Clean only with soft and dry cloths. Do not use chemical detergents. Product can only be supplied by rated voltage or the voltage within the range provided. It is forbidden to use the product with damaged diffuser, damaged electric wiring or places of connections. ATTENTION! Do not look directly at LED light beam. Do not try to repair or disassemble the sealed body of the light as this may compromise performance and void the warranty. Product must not be used in unfavorable conditions, e.g. vibrations, explosive air atmosphere, fumes, or chemical fumes, etc. The LED light source inside the product is not replaceable. If the LED light source is damaged, the product cannot be repaired. Used or damaged product should be disposed of in accordance with applicable regulations.
Failure to follow these instructions may result into e.g. fire, burns, electrical shock, physical injury and other material and non-material damage. The producer shall not be responsible for any damage resulting from the failure to follow above instructions.
STORAGE AND TRANSPORTATION
Before delivery to the direct point of sale, the product must be stored in the
manufacturer’s packaging at a temperature from -20’C to +40’C, in a dry room
and without exposure to direct sunlight.
Transportation can be carried out by land, sea, air transport in the
manufacturer’s transport packaging.
WARRANTY
The warranty period for the product is indicated on the individual packaging and begins from the date of sale. During the warranty period, a faulty product can be exchanged or returned with prove of purchase and all components and accessories preserved. The following does not apply with the scope of limited warranty:
- Misuse the product and cause the products components damage:
- Unauthorized disassemble or the presence of deep mechanical damage to the product;
- Damage due to force majeure.
The manufacturer reserves the right to make amendments of this user’s manual. The manufacturer reserves the right to provide technical changes.
Producer/Producent: Allegro Opt Sp. z o.o., Handlowa 23, 05-120 Legionowo,
Poland.
Made in P.R.C. Store unused for no more than 2 years.
www.videx.com.pl
