SUNLITE 85387-SU Rectangluar Flat Panel Light Instruction Manual
- June 4, 2024
- sunlite
Table of Contents
SUNLITE 85387-SU Rectangluar Flat Panel Light
**Models:**
FOR 1×4 LED FLAT PANEL | 2×2 LED FLAT PANEL | 2×4 LED FLAT PANEL
INSTALLATION INSTRUCTIONS
| Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING: Avoid fire or electric shock. Follow installation instructions carefully. If unsure about electrical installation, consu It a qualified electrician. Wear rubber-soled shoes and work on a sturdy wooden ladder. Ground fixture to avoid potential electric shock. Handle metal parts carefully to prevent cuts. To avoid a hazard to children, account for all parts and destroy all packing materials. This product is only suitable for indoor damp applications.
CAUTION: Turn off the power at fuse or circuit breaker box before installation and maintenance. Fixture must be installed according to National Electric Code and local building codes. If you are unsure about wiring, consult a qualified electrican. maintenance. Fixture must be installed according to National Electric Code and THIS FIXTURE BODY IS ONE PIECE, DO NOT DISASSEMBLE OR MAKE ALTERATIONS.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interence, and (2) this device must accept any interence received, including that may cause undesired operation.
---|---
Installation Steps
Figure 1 & 2: Place panel light above the keel (G) of suspended ceiling.
Figure 3: Connect Land N wires as shown.
Figure 4: If using 0-1 OV dimming, connect wires to the DIM+ and DIM-
interface as shown.
\
SALE on Sunlite @ www.BulbAmerica.com take additional 5°/o Off with coupon code 5PDF
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>