OZARKE Modern Ring Crystal LED Pendant Light Instruction Manual
- June 1, 2024
- OZARKE
Table of Contents
OZARKE Modern Ring Crystal LED Pendant Light
Product Specifications
- Product Name: Crystal Ball Pendant Light
- Power Source: Electric
- Bulb Type: LED
- Assembly Required: Yes
- Tools Required (not included): Screw Driver, Electric Drill
Product Usage Instructions
- Before you begin the installation process, ensure that electrical power to the fixture is turned off at the electrical panel.
- Use a voltage tester to confirm no power is present at the fixture.
- Do not solely rely on a wall switch for safety.
- It is recommended to have an experienced electrician handle the installation.
FAQ
- Q: Can this pendant light be used with a dimmer switch?
- A: Yes, this pendant light is compatible with most standard dimmer switches. Ensure the dimmer switch is suitable for LED bulbs.
- Q: What is the recommended height for installing this pendant light?
- A: The recommended height for installation is typically around 30 inches above the surface below the light fixture.
- Q: How do I clean the crystal ball of the pendant light?
- A: To clean the crystal ball, gently wipe it with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials.
Thank you for shopping with Ozarké, we appreciate your business. Our goal is to provide excellent customer service before, during and after delivery. We’ve included a guide on how to install this light, should you require additional assistance please feel free to email us at info@ozarke.com and one of our customer service reps will reach out to assist you.
Before you get started
Turn off electrical power to the fixture at the electrical panel. Use the
appropriate voltage tester to ensure no power is present at the fixture before
you begin work. Do not rely on a wall switch to protect you from electrical
shock. Installation requires an experienced electrician.
Assembly Inventory
Please check the assembly inventory. If you find anything missing reach out to our customer service team.
- A- 1 x Crystal Ball
- B- 1 x Pendant Ring Body with wires attached
- C- 1 x LED Bulb
- D- 1 x Ring Bar
- E- 2 x Ring Bar Screw Caps
- F- 2 X Ring Body Screws
- G- 1 x Canopy
- H- 1 x Ceiling Bracket
- I- 2 x Silver Screws
- J- 2 x Dry Wall Anchors
Tools needed (not included)
- 1 x Screw Driver
- 1 x Electric Drill
Installation Instructions
Step 1
- Use a pencil or a pen to mark the drilling position. You can use the silver bracket (H) to mark the position of the light. It is very important to ensure you account for the wiring position on your wall or ceiling.
Step 2
- Using a drill, drill holes into the wall where you marked in step 1.
Step 3
- Insert drywall anchors (J) into each hole. Don’t damage or force the anchor in the hole. If the hole is small, try to make the hole (s) bigger.
Step 4
- Screw the silver bracket (H) to the wall using a screwdriver. Don’t attach the canopy just yet.
- This step is to be completed after wiring.
Step 5
- Insert the LED bulb (C) inside the top of the ring as shown in image 1.1, Be careful not to damage the bulb inserts, carefully insert the bulb inside the designated two small holes.
Step 6
- Insert the ring bar (D) inside the crystal ball (A). Add the ring bar screw caps (E) on each side to secure the bar to the ball.
Step 7
- Attach the ring ball to the ring using ring body screws (F).
Step 8
- Insert the lamp wire through the canopy (G). Adjust the wire to the desired length using the canopy screw
- Red Wire: Live, Blue wire: Neutral, Yellow wire: Ground
- Connect the lamp wires to the ceiling wires, and tuck them inside the lamp or the ceiling.
Step 9
- Attach the wall lamp to the silver bracket using the provided screws.
- Now you may turn your electrical power back on and test the lamp.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>