beper 90.825 Electric Hotplate Instruction Manual
- June 12, 2024
- beper
Table of Contents
beper 90.825 Electric Hotplate
Product Information
- Cod.: 90.825
The Electric Hotplate is a household appliance designed for heating and cooking food. It features two plates, a small plate with a power of 1000W and a big plate with a power of 1500W. The appliance operates on a power supply of 220-240V AC at a frequency of 50/60Hz.
Product Usage Instructions
Safety Precautions:
- Do not immerse the cord, plug, or any parts of the appliance in water or other fluids to avoid electric shock.
- Avoid using the appliance near explosives, highly flammable materials, gases, or burning flames.
- Keep the appliance and its cord out of the reach of children.
Cleaning:
- Before cleaning, ensure the appliance is turned off and unplugged from the power socket.
- Use a lightly damp cloth or non-abrasive detergent to clean the surface of the appliance.
Usage Advice:
- Never leave oil or fat to be heated without supervision.
- Avoid touching the surface of the plate when the appliance is in use or hot.
- The plate is intended for heating or cooking food. It is recommended to place a frying pan on the plate before use.
- Avoid using the appliance in open spaces or outdoors.
Guarantee:
The Electric Hotplate comes with a 24-month guarantee for material and
production defects from the date of original purchase. To claim the guarantee,
the purchase receipt and guarantee certificate must be submitted together. The
guarantee is valid only with the guaranty certificate and proof of purchase
(fiscal receipt) indicating the date of purchase and the model of the
appliance.
For further assistance or technical information, please contact assistenza@beper.com.
Precautions
Read the following instructions carefully, since they give you useful safety information about installation, use and maintenance and help you avoid mishaps and possible accidents. Remove the packing and make sure that the appliance is intact, with special attention to the supply cable.
The elements of the packing (plastic bags, polystyrene, etc) do not have to be
accessible to the children, in order to preserve them from dangerous sources.
It is recommended not to throw this packing material in the domestic waste,
but to deliver them to the appropriate station of collection or destruction
refusals, asking eventually information from the manager of the Sanitation
Department of your own municipality.
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
Before connecting the appliance make sure that the mains voltage corresponds
to the data specified on the label. The appliance can be damaged if the
voltage is not correct.
If the plug does not suit the socket, let it be replaced with another suitable plug by qualified personnel only, which shall also ensure that the section of the socket cables is suitable for your appliance’s power absorption.
Generally, the use of adaptors with multiple plugs and/or extensions is not recommended; should they be necessary, please use only simple or multiple adaptors and extensions in compliance with the safety rules in force, making sure that the capacity absorption limit marked on the simple adaptors and the extensions and the maximum power limit marked on the multiple adaptors are not exceeded. Do not use the appliance if the cable or the plug shows any damage. Do not use the appliance after a possible irregular working. In this case, switch it off and do not break it open. Refer to an authorized Beper after- sale service for repair and require original spare parts only. Failing to follow these instructions may impair the safety of your appliance.
This appliance is to be destined to its special purpose only. Any other use is to be considered as improper and thus dangerous. The manufacturer cannot be responsible for any damages deriving from improper, wrong or incautious use.
- This appliance is for household use only.
- To protect against electric shock, do not immerse cord, plug or any parts of the appliance into water or other fluids.
- Do not use the appliance near explosives, highly flammable materials, gases or burning flames.
- Do not allow children, disabled people or every people without experience or technical ability to use the appliance if they are not properly watched over. Close supervision is necessary when any appliance used by or near children.
Use advice
- Never leave oil and fat to be heated without supervision.
- Do not touch the surface of the plate when the appliance is in use or getting hot.
- The plate has been manufactured only for heating or cooking food.
- It is recommended to use the plate when the fry pan is already placed on it.
- Do not use the appliance in open space/outdoors.
Pans to use
For the most efficient use of your hot plate, the cooking utensils used should be with a solid base and be as even as possible, with a diameter of about 18mm to 20mm, and a maximum quantity of 12 L.
How to use the hot plate
When using the hot plate for the first time, connect the plug to the socket
and turn the temperature knob to the highest temperature setting for 3-5
minutes to remove dust that may have accumulated during manufacturing or
storage. Turn the hot plate on by rotating the temperature knob clockwise.
When the light indicator turns on, the hot plate starts heating.
There are 5 cooking levels as follows:
- For slow cooking, delicate foods, or thickening sauces, etc.
- For simmering food in big quantities
- For meat stir-frying
- For high-temperature cooking
- For boiling
The light indicator turns off automatically when the hot plate reaches the selected temperature. A built-in temperature control device helps maintain the desired temperature. Do not use the appliance continuously for more than one hour. When the appliance is not in use, set the knob at the lowest level (0) and disconnect it from the electric socket. Leave the appliance cooling down before storing it.
Cleaning
Turn off the appliance and disconnect it from the socket. Then clean with a lightly damp cloth or with a non-abrasive detergent.
Specifications
- Small plate 1000W – Big plate 1500W
- Power supply: 220-240V ~ 50/60Hz
For any improvement reasons, Beper reserves the right to modify or improve the product without any notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain and reduce the impact on human health and the environment. The crossed-out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance, it must be separately collected.
GUARANTEE
GUARANTEE CERTIFICATE
This appliance has been checked in the factory. From the date of original
purchase, a 24-month guaran-tee applies to material and production defects.
The purchase receipt and the guarantee certificate must be submitted together
in case of a claim to guarantee.
The guarantee is valid only with a guaranty certificate and proof of purchase
(fiscal receipt) indicating the date of purchase and the model of the
appliance
For any technical assistance, please contact directly the seller or our head
office in order to preserve the appliance’s efficiency and NOT TO void the
guarantee. Any intervention on this appliance by non-authorized persons will
automatically void the guarantee.
GUARANTEE CONDITIONS
If the appliance shows defects as a result of faulty material and/or
production during the period of guarantee, we guarantee repair free of charge
on condition that:
- The appliance has been used properly and for the purpose for which it has been intended.
- The appliance has not been tampered with, otherwise, it is not maintainable.
- The purchase receipt shall be presented.
- The appliance showing fair wear and tear shall not be covered by this guarantee.
Therefore, any part that could be accidentally broken or has visible signs of use in consumable products (such as lamps, batteries, heating elements…) the aesthetic parts are excluded from the guarantee, and any defect whatsoever resulting from non-respect of the rules for use, negligence in usage and/or maintenance of the appliance, carelessness, wrong or improper installation, damage during transport and any other damage not attributable the supplier.
For every defect that could not be repaired within the guarantee period, the appliance will be replaced free of charge. In any case, if the part to be replaced for defect, breakage or malfunction is an accessory and/or a detachable part of the product, Beper reserves the right to replace only the very part in question and not the entire product Contact your distributor in your country or after sales department Beper.
E-mail assistenza@beper.com which will forward your inquiries to your distributor.
BEPER SRL
Via Salieri, 30 – 37050 – Vallese di Oppeano – Verona
Tel. 045/7134674 – Fax 045/6984019
beper.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>