CRYSTORAMA DEL-90806-MK Six Light Chandelier Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA DEL-90806-MK Six Light Chandelier
Product Information
The model number of this product is DEL90806MK. It is manufactured by Crystorama.com. The fixture is dry-rated and is designed to be used with 6 candelabra base bulbs. It is recommended to use 40-watt bulbs, with a maximum wattage of 60 watts. LED bulbs can also be used for extended use.
The product comes with various parts, including crystal sets, mounting hardware, canopy, collar ring, collar loop, chain, fixture loop, check ring, frame, distributor box, and center finial.
This product contains lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information, please visit www.p65warnings.ca.gov.
Product Usage Instructions
- Before installation, place the fixture parts on a soft cloth-covered platform.
- Install the mounting bar onto the outlet box.
- Decide the desired hanging height and adjust the chain to the correct length.
- Spread the arms out equally. Place the check ring on the top of the fixture body and secure it with the fixture loop.
- Raise the fixture up and make the wire connection. Attach the canopy over the mounting bar and secure it with the collar ring.
- Dress the crystals as illustrated. Follow the sequence: 1-3-2-4-3-5-4-6-5-1-6-2.
Please note that all electrical components must be installed by a licensed
electrician in accordance with the National Electric Code and the appropriate
local electrical codes.
It is important to use the recommended bulb wattage and to turn off the power
before any electrical work. LED bulbs are recommended for extended use.
WARNING:
- Electrical DangerTurn Power Off
- All electrical components must be installed by a licensed electrician in accordance with the national electric Code and the appropriate local electrical codes
- You will need 6- Candelabra Base Bulb40 Watts recommended 60 Watts Max. USE LED BULBS FOR EXTENDED USE The fixture is Dry rated
Dimension
HOW TO INSTALL
Place the fixture parts on a soft cloth-covered platform before installation of fixture.
- Install the mounting bar onto the outlet box.
- Decide the desired hanging height and adjust the chain to the correct length.
- Spread the arms out equally. Place the check ring on the top of fixture body and secure with the fixture loop.
- Raise the fixture up and do the wire connection. Attach the canopy over the mounting bar and secure with collar ring.
- Dress the crystals as illustrated.
Dress Crystal Strands C in the following sequence:
Crystal Sets
- A. 6 Sets. (2)14mm
- B. 6 Sets. 300mm long bead string–(10mm bead*19pcs)
- C. 6 Sets. 590mm long bead string –(10 mm bead*37pcs)
- D. 1 Piece. (1)AS8-40mm Ball
- E. 1 Piece. 530mm long bead string-(10mm bead*35pcs)
- WARNING: This product can expose you to Lead, which is known to the State of California to cause cancerand/or birth defects or reproductive harm. For more information go to www.p65warnings.ca.gov
Part Number
Part Numbers-For Hanging
- A. (1)-Mounting hardware
- Wire Connector x 2.
- Mounting bar x 1.
- Lock washer x 1.
- Hex nut x 1 .
- Mounting screw x 2.
- Thread Nipple x 1.
- B. (1)-Canopy (W5″×H1 1/4″)
- XSN90803MKCAN5.11IN
- C. (1)-Collar Ring
- D. (1)-Collar Loop
- E. (1)-Chain (4mmx72″)
- XSN90803MKCHA4MM
- F. (1)-Fixture Loop
- G. (1)-Check Ring
- H. (1)-Frame
- I. (1)-Distributor Box
- J. (1)-Center Finial
- K. (6)-Crystal Bobeche 02 3/8″, H3/8″; 23mm center hole.
- XSN90802BOB2.4IN
- L. (6)-Candle Sleeve; 0 7/8″, H4 1/8″
- XSN90806MKCDL4.13IN
- Crystorama.com
Documents / Resources
|
CRYSTORAMA DEL-90806-MK Six Light
Chandelier
[pdf] Instruction Manual
DEL-90806-MK Six Light Chandelier, DEL-90806-MK, Six Light Chandelier, Light
Chandelier, Chandelier
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>