PNI CPA700 Tires Inflator Air Compressor User Manual
- June 12, 2024
- PNI
Table of Contents
PNI CPA700
Tires inflator air compressor
User manual
Functions
- Suitable for vehicles with 12V power supply.
- Strong airflow, fast inflation.
- Useful in emergency situations (flat tire), wherever you are: on the highway, on country roads or in the city.
- The transport case includes:
» air compressor with 3 m power cable and 12V cigarette lighter socket
» 3.5 m flexible extension hose
» power cable with pliers and car socket
» tire repair kit with 5 pieces of textile cord
» accessories for inflating balls, mattresses, balloons, bicycle wheels
» tool set: pliers, knife cutter, flat and cross head screwdriver
Applications
The product is suitable for: vans, cars, SUVs, mini busses, vans, motorcycles, bicycles, swimming rings, boats, mattresses, balls, etc.
Usage
- Connect the pliers to the vehicle’s battery observing the polarity: red (+), black (-).
- Start the vehicle’s engine and connect the compressor to the car socket at the end of the cable with pliers.
- Connect the compressor hose to the tire valve and start the compressor from the button.
- The pressure indicator (manometer) will initially indicate the existing pressure in the tire, after which it will gradually increase.
- When the pressure reaches the value indicated in the car manual or on its pressure label, stop the compressor and disconnect it from the battery.
Warnings
- Use the compressor only with the engine running, to have enough power for correct operation.
- The power supply required for this compressor is 12V DC and 18A – 25A. Failure to comply with these parameters can lead to the malfunction of the compressor or even to its failure.
- Generally, it takes about 3 minutes of operation to bring the pressure of a tire close to the desired value, say about 30 PSI / 2.2 Atmospheres. If the value on the manometer increases much faster and exceeds 100 PSI 7 Atmospheres, stop and disconnect the compressor because there is a problem, a blockage. Check the cables and hose and try again.
- Always monitor the pressure indicated on the manometer and do not let it inflate more than necessary.
- To keep the compressor in good condition, it is recommended to use it for a maximum of 10 minutes, followed by a 10-minute break, to allow it to cool down and to avoid damage to the engine and other components.
- Protect the compressor from water, do not hit it and do not let it out of your hands, as malfunctions that are not covered by the warranty may result.
Technical specifications
- Power supply: 12V DC
- Voltage range: 10V-15V DC
- Airflow: 70L/min
- Current: 18A – 25A
- Maximum pressure: 150 PSI 10 Atmospheres
- Operating temperature: -26°C ~ +80°C
EU Simplified Declaration of Conformity
SC ONLINESHOP SRL declares that Tires inflator air compressor PNI CPA700
complies with the Directive EMC 2014/30/
EU. The full text of the EU declaration of conformity is available at the
following Internet address:
https://www.mypni.eu/products/6274/download/certifications
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>