JAMARA RS 6 Ride on Audi Instructions

Ride on Audi RS 6
No. 461825 white No. 461826 red
No. 461827 black No. 461828 gray
Instruction

General information

JAMARA e.K. is not liable for any damage caused to the product itself or through this, provided this is due to improper operation or handling errors. The Customer alone bears the full responsibility for the proper use and handling, including without limitation, the assembly, the charging process, the use and choice of the operation area. Please refer to the operating and user instructions, it contains important information and warnings.
Suitable for children over 3 years.
Warning: Not suitable for children under 36 months. RISK OF SUFFOCATION!
Contains small parts which can be swallowed. Keep away necessarily from children
Due to its top speed this toy is not suitable for children under 3 years!

• Before playing, remove all protective films from all parts

• This product is not intended for use by individuals (including children) with reduced physical, sensory or mental capabilities or lack of experience and / or knowledge.

• Depending on development, a minimum age of 4 years could be appropriate

• Maximum weight: < 30 kg
  Before assembly

• Adult required for assembly. Keep children away while assembling.

• Tools (not included) needed for assembly: screwdriver.

Certificate of Conformity

** Hereby JAMARA e.K. declares that the products „Ride on Audi RS 6, No. 461825, No. 461826, No.
461827, No. 461828“ comply with Directives 2014/35/EU, 2014/53/EU, 2011/65/EU and 2009/48/EC. The full text of the EU Declaration of Conformity is available at the following Internet address: www.jamara- shop.com/Conformity
** Read the complete instructions and security instructions carefully before using the model.
To prevent accidents and injuries, DO NOT leave your Child unattended during operation of the vehicle. Never let your Child out of your sight while the driving a vehicle .
DO NOT use the vehicle on public roads or places or other dangerous locations. ONLYoperatetheRideOnCarinplacessuchasprivateparking,privatelandor  other safe locations. Make sure that no person or animal is endangered.
The model stops after releasing the accelerator, independently on a horizontal surface. The vehicle has no brake or parking brake. Do not operate the vehicle uphill or downhill, and secure it when parking.

DANGER

• For safe driving, you should make sure that your Child understand and adheres to the following rules:
  – Always sit tight, do not get up during the ride.
  – Never take additional Children for a ride. (The vehicle is only suitable for 1 person)
  – Hold tight.
  – Never drive without shoes.
  – Never drive in the dark.
  – To be used with protective equipment.

• Keep hands, hair, loose clothing and any other item away from any rotating parts.

• The Model should not be used in rooms or halls with high humidity, in the rain or on wet surfaces. Risk of malfunction or damage to electronics and housing.

• The model is not water- or splash-proof. Only operate on asphalted surfaces (such as paving stones). The model is not suitable to be operated in grass or loose soil.

Only use in direct supervision of an adult!
To control the vehicle a minimum skill level and caution is needed. Make sure you are familiar with the operation of the model and its characteristics. The model is heavy. This is an increased risk of injury and damage in the event of loss of control. Avoid any kind of intentional or unintentional collisions with objects or hazards to persons.
Box content:

• Model
• Transmitter 2,4GHz
• Battery pack (412620)
• Charger (412978)
• Assembly tool
• Instructions

1. Assembly of the front wheels
   Place the body with the underside facing up. To mount the front wheels, slide a washer onto the    front axle. Put a wheel on the axle and slide another washer onto it. Fix the whole thing with a nutandfinallyputonawheelcover.

2. Assembly of the rear wheels
   Plug the motor onto the rear axle. Slide a drive wheel and a washer onto the rear axle. Secure it with a nut. Now put the wheel cover on the wheel.
   Repeat on the other side.

3. Mounting the Steering Wheel
   Connect the cable from the steering wheel tothe cable on the dashboard.Install the steering wheel (3) in the intended position until they click into place.

4. Battery connection
   Connectall connect or sasshown.Only connect plug connections that fitintoe acho ther and take care not to reverse polarity. Make sure that the red cable and the black cable are connected to the respective connectors of the same colour. Check the power supply by pressing the ON/OFFswitch on the model.If the power supply is working,youwillhearamotor   noise.

5. Assembling the seat
   Slide the two pins at the rear of the  seat into position in the body and secure the seat with two screws.

6. Windshield assembly
   Align the windshield with the corresponding openings on the car body, insert and push them  into place.

7. Assembling the mirrors
   Push the rear view mirrors into the intended position until they click into place.

8. Charging Your Vehicle
   • The power swich must be turned in OFF position when charging.
   • Plug the charger port into the input socket and plug the charger plug into a wall outlet.
   The battery will begin charging.
   • The charge time is 6 hours.
   • When the vehicle begins to run slowly, recharge thebattery.
   • Do not charge the battery more than once within 24 hours.
   • Charger and battery heat up during the charging process.

Warning!

• The charger is not a toy. Only use the charger supplied.
• The battery may only be charged by or under the supervision of an adult.
• The terminals must not be short-circuited.
• The charger must be checked regularly for damage to the cable, plug, housing and other parts. If any damage is found, the charger must not be used until the damage has been repaired.
• Let the model cool off sufficiently after each use before putting it back into operation. When using an additional batteries let it cool off for minimum 15 minutes until the model is operated again. Overheating can damage the electronics or may result in fire.
• Always disconnect the model from the charger immediately after charging. Always disconnect the charger from the power supply immediately after disconnecting the model. Inserting the rechargeable model or charger after charging will result in damage tothe model, charger or the power supply (fire hazard).
• Use the charger only in dry rooms.

Functions

1. Soundboard

2. ON/OFF switch
   With the ON/OFF switch you start the vehicle.

3. Light button

4. Shift Lever:
   Forward: Press the “Forward-backward switch” on the “Forward” position.
   Press the “Foot pedal”, the model drives forward Stop:
   The model will brake automatically, when your child’s foot remove from the “Foot pedal”. Press the “Forward-backward switch” in the middle.
   Reverse: Press the “Forward-backward switch” on the “Backward” position.
   Press the “Foot pedal”, the model drives backward.
   Important! The vehicle must be stationary before changing direction or speed.
   Otherwise the gear unit and/or the motor could be damaged.

5. Foot pedal

6. Horn button

7. Music button

Soundboard

1. USB

2. Bluetooth/Music
   By pressing the button shortly Bluetooth will turn on.
   By pressing the button shortly again music will start to play.

3. Song button

4. Music/V Press = previous, long press = Volume down

5. Music/V+ Press = Next, long press = Volume up

6. Voltage display

Functions transmitter

1. Forward
2. Backward
3. Speed
4. Speed display
5. Left
6. Brake
7. Right
8. Battery compartment Fitting the batteries Observe the polarity..

Battery warning:
Non-rechargeable batteries are not to be recharged!
Do not open! Do not dispose of in fire!
Do not mix old and new batteries!
Do not mix alkaline batteries, standard (carbon-zinc) or rechargeable batteries!
Rechargeable batteries are to be removed from the toy before being charged!
Rechargeable batteries are only to be charged under adult supervision!
The supply terminals are not to be short-circuited!
Binding transmitter and model
Press and hold the forward (1) and reverse (2) buttons simultaneously until the speed indicator light (4) flickers. Now switch on the car and you will see that the speed indicator light stops flickering, which means that the binding process was successful.
Now the model can be controlled with the transmitter.
Caution
Always switch off the model immediately after each use. Immediately after each use the battery should be disconnected from the model. The battery can be deeply discharged by leaving it switched on accidentally or leaving it plugged in. Deep discharge causes the battery to lose power or can be damaged to such an extent that charging or discharging is no longer possible or the battery can self-ignite during charging or discharging (fire hazard). Never attempt to charge or discharge deeply discharged batteries. The battery voltage should never fall below 11,9 volts to avoid deep discharge. The fully charged battery has a voltage of approx. 13 Volt. After use, the intact battery should be fully charged immediately after a cooling phase of at least 10 minutes but at the latest after 12 hours to avoid subsequent deep discharge by self- discharge. If the battery is not used or stored for a longer period of time, the battery should be checked for voltage (min. 12,3 volts) or damage at least every 3 months and charged or disposed of if necessary.

charger and battery
The battery can no longer be charged although the battery and charger are OK.| Charging socket defective| Check or replace the charging socket.
The journey time is very short.| The battery has been deep discharged or is worn out.| Use a new battery and avoid deep discharge.
No function| Battery is not or incorrectly connected.| Connect the battery (see instructions)
ON/OFF switch defective.| Check or replace switch.
Can be switched on but does not drive.| Motor cable incorrectly connected or not connected.| Check and connect motor cable (see instructions).
Can be switched on but does notmove, or only direction.| Gas or direction switch defective.| Check or replace switch.
Can be switched on but only travels in one direction| Directional switch defective.| Check or replace switch.
The active fuse blows and switches the unit off for a few seconds. You will hear a single click at the beginning| Oberload or electrical short circuit.| Do not overload or have the until checked.
Vehicle does not respond to remote control| Not bound.| Carry out the binding process (see instructions).
No sound function on the steering wheel/andlebar| the cable was torn or crushed during assembly.| Check or replace the steering wheel.
Vehicle has very high wear on switches.| Dirt and moisture damage the switches.| Do not drive in moisture or dirt such as meadows, gavel, sand. etc.
The rubber tyres come loose on the wheels| Ridden on too hot a surface or in chit.| Change tyres and avoid hot surfaces and dirt.

You can find further solutions to problems on the Internet in our FAQ at: https://jamara-shop.com/FAQ

Spare parts

Disposal restrictions

Batteries and accumulators must not be disposed of in domestic waste. You are obliged to dispose of batteries (seperate collection) appropriately. After use you can return batteries free of charge to the retail store. As batteries contain substances that can be irritant, can cause allergy and are highly reactive, separate collections and proper recycling is important to the environment and to your health. If the batteries are marked with a chemical symbol Hg, Cd or Pb below the crossed-out waste bin on wheels it refers to that more than 0.0005% of mercury (Hg), more than 0.002% of cadmium (Cd) or more than 0.004% Lead (Pb) is included.
Disposal restrictions
Electrical appliances must not be disposed of in domestic waste and must be disposed of separately.
You are obliged to take out the batteries, if possible, and to dispose of the electrical equipment at the communal collection points. Should personal data be stored on the electrical appliance you must remove them by yourself.
All rights reserved. Copyright JAMARA e.K. 2023
Copying or reproduction in whole or part, only with the expressed permission of JAMARA e.K.

Service centre

Reitter Modellbau Versand
Patricia Reitter
Degerfeldstrasse 11
DE-72461 Albstadt
Tel +49 (0) 7432 9802700
Fax +49 (0) 7432 2009594
Mail info@modellbauversand.de
Web www.modellbauversand.de
JAMARA e.K.
Manuel Natterer
Am Lauerbühl 5
DE-88317 Aichstetten
Tel +49 (0) 7565 9412-0
Fax +49 (0) 7565 9412-23
Mail info@jamara.com
Web www.jamara.com
Janus Trade D.O.O. Distributor Jamara for Slovenia
Koroška cesta 53c
SI-4000 Kranj
Mail info@janustrade.si
Web www.janustrade.si
Nettrade Kft.
Distributor Jamara for Hungary
1033 Budapest, Hévízi út 3/b
Tel +36 30 664 3835
Mail ugyfelszolgalat@kreativjatek.hu
Mooser T-Trade
Thomas Mooser
Bürgermeister-Koch-Str. 32a
DE-82178 Puchheim
Tel +49 (0) 89 1792 9867
Fax +49 (0) 89 1792 9869
Mail info@mooser-t-trade.de
Web www.mooser-t-trade.de

PenTec s.r.o.
Distributor Jamara for Czech Republic and Slovakia
Veleslavínská 30/19
CZ-162 00 Praha 6
Tel +420 235 364 664
Mobil +420 739 075 380
Mail servis@topdrony.cz
Web www.topdrony.cz

Viva-net d.o.o.
Distributor Jamara for Croatia
Ante Topic – Mimare 8
HR-10000 Zagreb-Susedgrad
Mail info@viva-net.hr
Web www.viva-net.hr

JAMARA e.K.
Inh. Manuel Natterer
Am Lauerbühl 5 – DE-88317 Aichstetten
Tel. +49 (0) 75 65/94 12-0 –
Fax +49 (0) 75 65/94 12-23
info@jamara.com
www.jamara.com
Service – Tel. +49 (0) 75 65/94 12-777
service@jamara.com

Documents / Resources

| JAMARA RS 6 Ride on Audi [pdf] Instructions
RS 6 Ride on Audi, RS 6, Ride on Audi, on Audi, Audi
---|---

References

• Naslovnica - Net.hr
• t-trade.de is available for purchase - Sedo.com
• jamara.com
• Janus Trade
• Reitter Modellbau & Robotics - Zubehör, Ersatzteile, Bausätze
• Mooser T-Trade: Dein neuer Lieblings-Online-Shop für Plastik Modellbau
• FAQ - Fragen und Antworten

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>