i-box Attune Portable DAB DAB+FM Radio User Guide

i-box Attune Portable DAB DAB+FM Radio

Specifications

• Model: i-box Attune
• Power Source: Built-in lithium-ion battery
• Charging Port: USB-C
• Box Contents:
  • 1x i-box Attune
  • 1xUSB Charging Cable
  • 1x User Manual
  • 1x Quick Start Guide

Product Usage Instructions

1. Caring for your Radio

Before operating your radio, please read the following safety instructions:

• Do not place naked flame sources, such as lit candles on or near the unit.
• Do not expose to dripping or splashed liquids. Objects filled with liquids, such as vases, must not be placed close or on the unit.
• The unit should not be exposed to direct sunlight, very high or low temperatures, moisture, strong magnetic fields, microwaves, or dusty environments.
• Always leave sufficient space around the unit for ventilation, do not cover.
• Do not use abrasives or solvents to clean this product. Use only a clean, damp, soft cloth.
• Do not disassemble or modify the unit, there are no user-serviceable parts.
• If the unit is damaged in any way or malfunctions, do not use. Consult a qualified service engineer.

2.Charging Your Attune

To charge your Attune:

1. Connect one end of the USB Charging Cable to the USB 5V port (18) on the back of your Attune.
2. Connect the other end of the cable to a power source.
3. Make sure to charge in a cool place out of direct sunlight, allowing good air circulation around the product.
4. Once the battery is fully charged, remove it from charge. Never charge your battery for more than 6 hours to avoid overcharging.

3. Turning Your Attune On/Off

To turn on your Attune:

• Short press the ON/OFF key (3) to switch on your Attune into the last used mode. If it’s the first time powering your Attune, it will automatically go to DAB radio mode.

To turn off your Attune:

• Short press the ON/OFF key (3).

4.Navigating Menus

To navigate menus:

• Long press the INFO/MENU key (8) to enter the menu mode.
• Use the next (10) and previous (11) keys to scroll through the menu options.
• Short press ENTER (0) to select an option or enter a submenu.
• Short press BACK (6) to return to the previous menu.

FAQ

Q: How do I reset my Attune if it hangs or freezes?

A: In the rare event that your Attune hangs or freezes, insert a thin object such as a pin or paper clip into the RESET hole (16) and press until you hear a click. Your Attune will switch off. Press the ON/OFF key (3) to switch your Attune back on again.

Q: How do I ensure optimum reception when listening to radio stations?

A: Make sure the antenna (13) is fully extended for optimal reception.

Introduction

The i-box Attune is a stylish and easy-to-use upright portable DAB/DAB+ and FM radio. The DAB+ radio function offers you crisp and clear audio quality at the touch of a button and automatically searches for all available radio stations, displaying them on the large LCD display – so you know exactly which one you’re listening to. If you prefer to play your own selection of music the Attune also offers playback via Bluetooth and AUX IN. While the built-in 2,200mAh rechargeable lithium battery and handy carrying strap, make it easy to listen to your favourite tracks and stations from anywhere around the home.

Caring for your Radio

Important safety information. Please read these instructions fully before operating your radio.

• Do not place naked flame sources, such as lit candles on or near the unit.
• Do not expose to dripping or splashed liquids. Objects filled with liquids, such as vases, must not be placed close or on the unit.
• The unit should not be exposed to direct sunlight, very high or low temperatures, moisture, strong magnetic fields, microwaves or dusty environments.
• Always leave sufficient space around the unit for ventilation, do not cover.
• Do not use abrasives or solvents to clean this product. Use only a clean, damp, soft, cloth.
• Never attempt to insert wires, pins or other such objects into the vents or openings of the unit, except for the reset hole (16) – see reset instructions on page 5 or 10.
• Do not disassemble or modify the unit, there are no user-serviceable parts.
• If the unit is damaged in any way or malfunctions do not use. Consult a qualified service engineer.
• This product contains a built-in lithium-ion battery. Improper use can cause the battery to catch
• fire or explode causing serious or fatal injury. Always charge in a cool place out of direct sunlight, allowing good air circulation around the product. Once the battery is fully charged, remove from charge. Never charge your battery for more than 6 hours. Over-charging will reduce battery  life and may cause overheating and catastrophic failure.

Box Contents

• 1x i-box Attune
• 1x USB Charging Cable 1x User Manual
• 1x Quick Start Guide

Front View

1. Carrying Strap

2. LCD Display

3. On/Off key

4. Preset key

5. Mode key

6. Back key (previous menu)

7. Volume dial

8. Info/Menu key

9. Enter/Scan / Play/Pause key

10. Next key

11. Previous key

12. Speaker
    Back View

13. Antenna

14. Bass Reflex port

15. AUX IN port

16. Power Reset Switch*

17. Charging LED indicator

18. USB-C Charging port
    Display

19. Signal Strength indicator

20. AM/PM indicator

21. Time

22. Bluetooth indicator

23. Charge indicator

24. AUX Mode indicator

25. FM Radio indicator

26. DAB Radio indicator

27. Radio Station

28. Programme Information

Please make sure the antenna 13 is fully extended for optimum reception when listening to radio stations.

• If in the rare event that your Attune “hangs” or “freezes”. Insert a thin object such as a pin or paper clip into the RESET hole 16 and press until you hear a click and your Attune will switch off. Press the ON/OFF key (3) to switch your Attune back on again.

Charging Your Attune

Before charging the Attune, please read the warnings concerning charging lithium batteries . Your Attune has a 2,200mAh built-in, non-user replaceable, lithium battery. To charge your Attune, plug the USB cable (supplied) into a powered USB port and the USB-C into the USB-C charging port 18 . For best results, the first time you charge the Attune, let it charge for 3-5 hours until fully charged. This battery icon is displayed when the Attune is charging. The charging LED indicator 17 lights red during charging. The LED will turn off when the unit is fully charged. This icon indicates a full charge, this icon indicates low charge.

Turning Your Attune On/Off

Short press the ON/OFF key (3) to switch on your Attune into the last used mode, if you are powering your Attune for the first time it will automatically go to DAB radio mode. To turn off your Attune, short press the ON/OFF key (3).

Navigating Menus

Long press the INFO/MENU key (8), then use the next and previous keys to scroll through the menu options. Short press ENTER (0) to select an option or enter a submenu. Short press BACK (6) to return to the previous menu.

Change Operating Language

The default is English. Five other operating languages are also available: Deutsch, Español, Français, Italiano and Nederlands.

Setting the Time and Date

The time and date are configured to set automatically when the Attune first enters either DAB or FM mode and receives a signal (depending on your location). If you want to set the time or date manually

Audio Mode Selection

Short press the MODE key (5) repeatedly to switch between audio modes.

DAB Radio Mode

Full Scan

The first time the Attune is switched to DAB mode it will perform a full scan to compile a list of all currently available DAB stations. To ensure as complete a list as possible make sure the antenna 13 is fully extended.

Station List

The LCD display shows the name of the station playing and program information. Short press the next (10) and previous (11) keys to scroll through the list of stations found during scanning, the short name will be shown. Press ENTER/SCAN (9) to listen to the station shown

Saving a Station to the Preset List

To save the station playing to one of the 30 available DAB preset slots, long press the PRESET (4) key, scroll to an empty preset slot or overwrite an old one, press the ENTER/SCAN (9) key to store.

Playing a Saved Preset

Short press the PRESET (4) key, scroll to the preset you want to play, press the ENTER/SCAN (9) key to play.

DAB Radio Menu

The options are full scan, station list, manual tune, DRC, prune, or system

Manual Tune

If you know the frequency of a station you can search for it using this option, press ENTER/SCAN (9) to play.

Dynamic Range Control (DRC)

DRC can make quieter sounds easier to hear when your radio is used in a noisy environment. This function is only available for some DAB stations.

Prune

Set prune to “Yes” to clear stations with no signal reception from the DAB station list when you next perform a full scan.

Radio Mode

Auto Scan

Long press the ENTER/SCAN (9) key to auto scan for all receivable FM stations. Stations found will be saved to the preset list. To ensure as complete a list as possible make sure the antenna 13 is fully extended.

Auto Scan for Next Available Station

Long press the / keys to tune to the next available station.

Manual Tuning

Short press the / keys to fine tune the frequency.

Saving a Station to the Preset List

To save the station playing to one of the 30 available FM preset slots, long press the PRESET key (4) then short press the next/previous / keys to scroll to an empty preset slot or overwrite an old one. Press ENTER/SCAN (9) to store.

Playing a Saved Preset

Short press the PRESET (4) key to enter the preset menu, then short press / (10/11) to scroll to the preset slot you want to play. Press ENTER/SCAN (9) to play.

FM Radio Menu

The options are scan settings or system.

Scan Settings

By default, the FM scan stores all available stations, even if the signal is weak and the audio quality is poor. It is best to use the “Strong stations only” option to ensure the stations found have a clear signal, follow the steps below.

Bluetooth Mode

Use the MODE key (5) to select Bluetooth mode, the screen will flash “Not Connected” to indicate that the Attune is in pairing mode. Your Attune will automatically search for the last connected device. Connect a compatible device as shown below. When your device is connected you will hear a chime.

You don’t need to re-pair. The Attune will automatically reconnect with your device when they are in range and both are turned on.
To disconnect your device, long press the ENTER/SCAN key (9). You will hear a chime when your device has been disconnected successfully. Your Attune is now ready to pair with a new device.

Playback Controls

Use your device to control playback or use the Attune’S controls for the following options:

• Previous track (11)
• ENTER/SCAN Play/Pause track (9)
• Next track (10)
• Use the volume dial (7) to control the volume. You can also use your device to change the volume. Adjust the volume on both your device and the Attune for optimum sound.

AUX IN Mode

Use the MODE key (5) to select AUX IN mode. Connect any audio device to the 3.5mm AUX IN port 15 on the back of your Attune. Use your device to control and select audio and use a combination of the volume on your device and the Attune to adjust for optimum sound.

System Menu

The options are sleep, time, backlight, language, factory reset, software version.

Sleep Function

In any audio mode you can use the sleep timer function to set a time period after which your Attune will switch off automatically. The available options are: Sleep off, 15, 30, 45, 60 and 90 minutes. When the sleep function is in use, this icon and the remaining time is displayed.

Backlight

Timeout

Select how long until the display enters dim level. The available options are: 10, 20, 30, 45, 60, 90, 120, 180 seconds or on (the display will not dim).

On Level

Select the brightness of the display when on.

Dim Level

Select the brightness of the display when dimmed.

Time and Date Settings

By default the time and date will auto update, for other time settings or to set the time/date manually see below.

Set Time/Date Manually

Follow the steps below to set the time and date manually.

Auto Update

By default the Attune will auto update the time/date using a DAB or FM time signal. You are given the choice of using “Update from Any”, “DAB” or “FM” for auto update, or of using “No Update”. We recommend you select “Update from Any” if you want to auto update as the availability of DAB and FM time signals can vary from region to region.

Set Display Format

Choose between 12-hour or 24-hour clock display format. The default is 24-hour.

Set Date Format

Choose between DD-MM-YYYY (the default) or MM-DD-YYYY.

Factory Reset

Reset the Attune to factory default settings. This will delete all settings, the station list and presets.

Troubleshooting

Radio reception is poor

| ****

Check that the antenna is extended for the

maximum signal strength and improved reception.

| ****

Adjust the antenna direction to improve the signal. Move the unit closer to a window.

| Check that the unit  is not close to microwaves,

fluorescent lights or other equipment which may cause interference.

No sound

| Check if the volume is turned down. Increase the volume.| Check that the unit is switched on.| Try tuning to another radio station.

The unit does not turn on

| The battery is flat and the unit is not securely connected to a powered USB socket.| ****

Connect to a powered USB socket.

| ****

Connect to a higher output USB socket.

Radio hangs or freezes

| Use the power reset switch (16) to turn off the Attune:

1.  Insert a thin object for example a pin or paperclip into the RESET hole (16) on the back of your Attune.

2.  Short press the ON/OFF key (3) to turn the Attune back on.

Product Specifications

Specifications

Power Input| 5V?1.5A
Audio Output| 3W RMS
FM Frequency Range| 87.0 MHz to 108.0 MHz
DAB/DAB+ Frequency Range| 174.928MHz (5A) – 239.200MHz (13F)
Playing Time| Up to 12 hours at 50% volume
Built-in Rechargeable Battery| Lithium-ion 2,200mAh

Disclaimer

Updates to firmware and/or hardware components are made regularly. Therefore some of the instructions, specifications and pictures in this documentation may differ slightly from your particular situation. All items described in this guide are for illustration purposes only and may not apply to your particular situation. No legal right or entitlements may be obtained from the description made in this manual.

Declaration of Conformity

Hereby, Philex Electronic Ltd. declares that the radio equipment model i-box Attune for wireless reception in domestic premises is in compliance with the Radio Equipment Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.philex.com/doc

Technical Support

For further help, advice, information visit www.iboxstyle.com/support

References

• i-box
• Support – i-box

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>