CRYSTORAMA 131-MK Calypso Ceiling Mount Light Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA 131-MK Calypso Ceiling Mount Light
Product Information
The Crystorama Lighting Model#131-MK is a high-quality lighting fixture designed to provide elegant and stylish illumination. Crystorama has been a leader in the lighting industry for sixty years, offering innovative designs and superior craftsmanship. This fixture is Damp rated, making it suitable for use in areas with high humidity, such as bathrooms or covered outdoor spaces. It requires 1-Medium Base Bulb with a recommended wattage of 40 Watts, and a maximum wattage of 60 Watts. LED bulbs are recommended for extended use. Please note that all electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes. Failure to do so may result in electrical danger. This product contains lead, which is known to the state of California to cause cancer and/or birth defects or reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
WARNING:
All electrical components must be installed by a licensed electrician in
accordance with the National Electric Code and the appropriate local
electrical codes.
You will need 1-Medium Base Bulb 40 Watts Recommended 60 Watts Max. USE LED BULBS FOR EXTENDED USE This fixture is Damp rated
ASSEMBLY INSTRUCTION
MODEL#131-MK
Hanging Installation
- Determine the preferred hanging height and adjust the chain accordingly.
- Open one link of the chain and connect it to the fixture loop, then close the link. Open another link of the chain and connect it to the loop of the canopy, then close the link.
- Thread the mounting screws into the matching holes of the mounting bar and tighten them with the small hex nut.
- Secure the mounting bar to the outlet box using the outlet box screws.
- Raise the canopy, allowing the mounting screws to protrude through the holes in the canopy, and secure it with the ball nut.
- Hang crystals on the metal ring and bottom basket, alternating between glass drop A and B.
- Hang glass drop C at the bottom of the bottom basket.
- Install the bulb (not included) into the socket.
FOR HANGING:
Ceiling Installation
- Loosen the hex nut of the canopy and disassemble the canopy.
- Remove the loop on the top of the fixture.
- Slip the canopy, the metal washer, and lock washer over the nipple, then secure them with the hex nut.
- Thread the mounting screws into the matching holes of the mounting bar and tighten them with the small hex nut.
- Secure the mounting bar to the outlet box using the outlet box screws.
- Raise the canopy, allowing the mounting screws to protrude through the holes in the canopy, and secure it with the ball nut.
- Install the bulb (not included) into the socket.
- Hang crystals on the metal ring and bottom basket, alternating between glass drop A and B.
- Hang glass drop C at the bottom of the bottom basket.
FOR CEILING:
Note: The specific parts included in this product are as follows:
- A. (1) Mounting hardware
- B. (1) Canopy W5-7/8”xH1-1/8” #XRF130MKCAN6IN
- C. (2) Finial #XRF130MKFIN
- D. (2) Loop #XRF130MKLOOP
- E. (1) Chain – L72”, 4mm thick #XRF130MKCHA4MM
- F. (1) Metal ring
- G. (1) Bottom basket #XRF131MKBT
- H. (1) Socket
Part Number
- (1)-Mounting hardware
- (1)-Canopy W5-7/8’’xH1-1/8’’ #XRF130MKCAN6IN C. (2)-Finial #XRF130MKFIN D. (2)-Loop #XRF130MKLOOP
- (1)-Chain -L72’’, 4mm thick #XRF130MKCHA4MM F. (1)-Metal ring G. (1)-Bottom basket #XRF131MKBT
- (1)-Socket
For any further assistance or inquiries, please visit www.Crystorama.com.
WARNI NG: This product can expose you to Lead which is known to the state of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>