levelone GNC-0113 2.5 Gigabit PCIe Network Card User Guide
- June 17, 2024
- LevelOne
Table of Contents
GNC-0113
2.5-Gigabit PCIe Network Card, 1 x RJ45
User Guide
EN ver2.01
Description
PCIe Intel I225 2.5G Network card adopts a high-performance network controller I225- V. This controller with Base-T copper networking interface, provides compact, single- port integrated multi-gigabit (up to2.5G) –MDI (Copper) standard IEEE802.3 Ethernet interface for 2500BASE-T,1000 BA S E-T,100 BA S E-TX, 10BASE-TE connections, and it can also support Intel vPro ® technology on specific Intel platforms. It is designed for use on any mobile, desktop, workstation, value-server, or industrial designs that have critical space constraints.
Specification
- Compliant with PCI Express specification Revision 3.1 (5GT/s)
- MDI(Copper) standard IEEE802.3 Ethernet interface up to 2.5Gb/s
- Complies with single port 1GbE RJ45 port (copper)
- Complies with the MDI standard IEEE802.3 Ethernet interface for 2500BASE-
- T,1000 BA S E-T, 100BASE-TX, 10BASE-Te application (IEEE802.3bz, IEEE802.3ab, IEEE802.3u and IEEE802.3)
- IEEE802.3 Auto-negotiator
- IEEE802.3x and IEEE802.3z compliant flow control support with software-controllable RX thresholds and TX pause frames.
- Automatic cross-over detection function (MDI/MDI-X)
- IEEE 1588 Protocol and 802.1AS implementation
- Supporting Time Sensitive Networking (TSN) Capabilities
- Support IEEE802.3az-Energy Efficient Ethernet (EEE)
- Full Wake-On-Lan support
- TCP/UDP, IPv4 checksum offloads (Rx/Tx)
- Transmit Segmentation offloading (TSO)(IPv4, IPv6)
- Support for packets up to 9.5KB Jumbo Frames
- Drivers for Windows® 10 32 or 64bit
Package content
- Quick Installation Guide
- User Guide
- Resource CD (Driver)
- Low Profile Bracket
System Requirements
- Microsoft Windows® 10 Version 1809 and later 32 or 64bit
- Available PCI Express x1/x4/x8/x16 slot
Hardware installation
- Turn off the computer and unplug the power cord.
- Remove the computer cover and the adapter slot cover from the slot that matches your adapter.
- Insert the adapter edge connector into the slot and secure the bracket to the chassis.
- Replace the computer cover, then plug in the power cord.
- Power on the computer
Install Drivers
Windows® Operating Systems
You must have administrative rights to the operating system to install the drivers.
- insert the CD driver bound with Intel network driver into your CD-ROM drive(also you can download the latest drivers from support website)
- if the Found New Hardware Wizard screen is displayed, click Cancel.
- start the autorun located in the software package, the autorun may automatically start after you have extracted files.
- Click install Drivers and Software
- Follow the instructions in the install wizard to finish it.
Digital Data Communications GmbH
Im Defdahl 10 F, 44141 Dortmund, Germany
Email:support@level1.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>