Danfoss TE 2 Type Solder adaptor Installation Guide
- July 26, 2024
- Danfoss
Table of Contents
Danfoss TE 2 Type Solder adaptor
Specifications
- Part Number: 068R9519
- Accessory Type: Solder Adaptor
- Compatible with: T2 / TE 2 Type
- Silver Content: Min. 5% Ag
- Recommended Torque: Min. 35 Nm (26 ft-lbs) – Max. 45 Nm (34 ft-lbs)
- Model Number: DKRCC.PI.AA0.D1.00 / 520H8198
Product Usage Instructions
Installation Process:
- Ensure the solder adaptor is compatible with your T2 / TE 2 Type device.
- Apply a small amount of soldering flux to the connection area.
- Align the solder adaptor with the device’s connector and gently push it into place.
- Use a torque wrench to tighten the adaptor to the recommended torque specifications (35-45 Nm).
Frequently Asked Questions
- Q: Is the solder adaptor compatible with all T2 / TE 2 Type devices?
- A: Yes, the solder adaptor is designed to be compatible with T2 / TE 2 Type devices.
- Q: What is the recommended torque for installing the solder adaptor?
- A: The recommended torque for installation is between 35 Nm (26 ft-lbs) and 45 Nm (34 ft-lbs).
068R9519
068R9519
Installation Guide Accessory for T2 / TE 2 Type Solder adaptor
Max. 700 °C (1300 °F)
Min. 5% Ag
Min. 35 Nm (26 ft-lbs) Max. 45 Nm (34 ft-lbs)
DKRCC.PI.AA0.D1.00 / 520H8198
© Danfoss A/S (AC-MCI/sw) 2013-10
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>