beeper PRIME Electric Scooter User Guide

June 12, 2024
beeper

beeper PRIME Electric Scooter

beeper-PRIME-Electric-Scooter-PRODUCT-IMG

  • This document is a guide providing you with essential information about your product.
  • To install and use your product in total safely,
  • please consult the complete technical manual available at the following address: https://urlz.fr/k-cii or by scanning the QR code below.

WHAT’S IN THE BOX

DIMENSIONS

beeper-PRIME-Electric-Scooter-FIG-4

BATTERY INSTALLATION

beeper-PRIME-Electric-Scooter-FIG-5

PRESENTATION OF ORDERS

beeper-PRIME-Electric-Scooter-
FIG-10

SAFETY INSTRUCTIONS

BEEPER thanks you for your purchase and invites you before any use of your Personal Travel Engine Motorized (EDPM), read the precautions for use and safety instructions. The use of your scooter is subject to the legislation in force in your country. Please check with the authorities competent. Any recommendations (or lack thereof) in this manual cannot be assimilated to a transposition of the legislation in force. IXIT Beeper disclaims all liability in the event of bodily injury and material damage attributable to the use of the product not in accordance with the instructions for use.

  • Read these instructions carefully

  • Save These Instructions • Follow All Instructions • Heed Warnings

  • Do not attempt to disassemble the device, it would no longer be covered by the warranty.

  • Refer to qualified personnel! for any repair

  • Children should not play with the device.

  • The use of the scooter is prohibited for children under 12 years old.

  • The use of your scooter is not suitable for pregnant women and children under 16 years old.

  • This device can be used by children from 12 years old under the supervision of an adult, and by persons
    with reduced physical, sensory or mental abilities or a lack of experience and knowledge of provided that they are properly supervised or that they have received by a person responsible for their safety prior instructions relating to the use of the device and that the risks incurred are apprehended.

  • Regularly check that your scooter is in good condition, read the manual carefully and make sure you have understand all product information before using it.

  • The cleaning and maintenance of the appliance by the user must not be carried out by children.

  • Before each use, check the general condition of your scooter (condition of tires, brakes, battery, lights, etc.)

  • Your scooter has parts subject to heat, such as the brake disc and the wheels. It is forbidden to touch these elements less than an hour after using your scooter.

  • It is strongly recommended that all users wear adequate protection when using your scooter to avoid any bodily injury in the event of a fall: shoes, helmet, gloves, knee pads, elbow pads.

  • Do not use your scooter in high-traffic areas after your first use. A period of adaptation is necessary to master the product

  • Use on public roads is regulated. You must take the cycle paths first. In the absence of these, you can drive exclusively on roads limited to 50 km/h. Outside agglomeration, you can ride only on greenways and cycle paths.
    On sidewalks, pedestrian areas, buildings or any other place dedicated to pedestrians, you must move around with your scooter in your hand.

FOLDING AND UNFOLDING

  • Folding and unfolding can be difficult during the first uses.
  • Make sure your scooter is turned off.beeper-PRIME-Electric-Scooter-FIG-11
  1. Press the button located on the folding handle of the scooter.
  2. Lower the lever of the folding system and lower the mast by direction of the platform.
  3. Block your scooter by snapping the bracket locates under the stand phone on hook of the rear fender. To unfold your scooter, do the reverse approach.

CHARGER MAINTENANCE

  • The charger works only with the dedicated AC adapter.
  • The adapter must be plugged into o household outlet and easily accessible.
  • Do not cover, expose lo a source of heal or humidity and use in a ventilated area.
  • Please unplug your charger if it is not in use.
  • Do not use your charger if it is damaged.
  • The external flexible cable of this transformer cannot be replaced. The transformer should be scrapped.
  • Never connect and disconnect the battery connection terminals while the power cable is still connected to the mains. Always remove the plug from the socket first.
  • Do not store your mains charger in low-temperature areas. When the device returns to its normal temperature, moisture can form inside the device and damage the product
  • Unplug the charger during lightning storms or when unused for long periods of time to avoid damage.

DECLARATION OF CONFORMITY

  • Our products meet the compliance standards in force, find the declaration of compliance in the complete instructions downloadable at the following URL address: https://urlz.fr/kcii.

TECHNICAL ASSISTANCE & WARRANTY

  • Your EDP has a 10-year warranty (depending an the parts):
  • Frame & Structure = 10 years
  • Electronics & Mechanics = 3 years
  • A one-year manufacturer’s warranty is applicable far the batteries (see our general conditions of after-sales service)
  • Far anu request. do not hesitate to contact our technical team by email at technique@beeper.fr.

ASSEMBLY

  1. To begin assembling your scooter, straighten the most and lock it using the folding system. Insert the battery in its slot and lock it using the set of keys provided.
  2. Insert the telephone support on the left of the display and secure it with the Allen key 3 mm.
  3. Insert the brakes on the handlebar.beeper-PRIME-Electric-Scooter-FIG-8
  4. Then screw the handles and tighten the broke rings using the Allen key 5 mm.beeper-PRIME-Electric-Scooter-FIG-9

APPSTORE

  • Your electric scooter hos a mobile application.
  • To install and use it, please download the “MiniRobot” application directly from:
  • APPSTORE for APPLE /OS devices
  • PLAY STORE for ANDROID devices or by scanning the QR code.
  • Turn on your scooter and launch the opp, the scooter connects automatically.

PLAYSTORE

FIRST STEPS

  1. Place one foot on the platform and start the scooter with your second foot.
  2. Once the scooter is launched, pull the throttle trigger.
  3. After picking up speed, put the second foot on the platform.
  4. To change speed, press 2 short presses on the on/off button located at the level of the right handle.
  5. Pull the acceleration trigger to accelerate.
  6. Apply the brakes to slow down.
  7. Once your scooter hos stopped, you con get off and turn it off.

Find the complete technical manual on our website at the following address: https://urlz.fr/kcii or by flashing the QR code opposite.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals